{
  "name": "Thermal Management Cooling Technologies Performance and Metrology Benchmark",
  "description": "Original compilation comparing six standardized thermal management cooling technologies across heat flux capacity, effective thermal conductivity, power requirements, and governing test standards, compiled from JEDEC, ASTM, ASME, IEEE, and NASA specifications.",
  "page": "https://casrai.org/guides/thermal-management",
  "publisher": "CASRAI",
  "license": "https://creativecommons.org/licenses/by/4.0/",
  "dateModified": "2026-11-14T15:58:35Z",
  "temporalCoverage": "2024/2026",
  "spatialCoverage": "Global",
  "columns": [
    {
      "name": "Technology",
      "unit": "",
      "description": "Thermal management hardware architecture or cooling method"
    },
    {
      "name": "Primary Thermal Mechanism",
      "unit": "",
      "description": "Fundamental physical mode of heat transfer or phase change"
    },
    {
      "name": "Typical Max Heat Flux",
      "unit": "W/cm²",
      "description": "Maximum practical heat flux capacity handled at evaporator or component interface"
    },
    {
      "name": "Effective Thermal Conductivity",
      "unit": "W/(m·K)",
      "description": "Effective thermal conductivity across the active transport length"
    },
    {
      "name": "Active Power Requirement",
      "unit": "",
      "description": "Whether auxiliary electrical power is required to drive the cooling loop"
    },
    {
      "name": "Primary Governing Standard",
      "unit": "",
      "description": "Core industry, military, or aerospace engineering testing standard"
    }
  ],
  "rows": [
    {
      "Technology": "Solid Copper Conductor",
      "Primary Thermal Mechanism": "Solid-state thermal conduction",
      "Typical Max Heat Flux": 15,
      "Effective Thermal Conductivity": 398,
      "Active Power Requirement": "Passive (None)",
      "Primary Governing Standard": "ASTM C177"
    },
    {
      "Technology": "Extruded Aluminum Heat Sink",
      "Primary Thermal Mechanism": "Conduction and natural or forced air convection",
      "Typical Max Heat Flux": 10,
      "Effective Thermal Conductivity": 200,
      "Active Power Requirement": "Passive or Active fan",
      "Primary Governing Standard": "JEDEC JESD51-2A"
    },
    {
      "Technology": "Sintered Copper-Water Heat Pipe",
      "Primary Thermal Mechanism": "Two-phase closed capillary evaporation and condensation",
      "Typical Max Heat Flux": 75,
      "Effective Thermal Conductivity": 10000,
      "Active Power Requirement": "Passive (None)",
      "Primary Governing Standard": "NASA GSFC-STD-7000B"
    },
    {
      "Technology": "Copper Vapor Chamber",
      "Primary Thermal Mechanism": "Two-phase planar vapor spreading and capillary return",
      "Typical Max Heat Flux": 250,
      "Effective Thermal Conductivity": 5000,
      "Active Power Requirement": "Passive (None)",
      "Primary Governing Standard": "JEDEC JESD51-14"
    },
    {
      "Technology": "Pumped Single-Phase Liquid Cold Plate",
      "Primary Thermal Mechanism": "Forced convective liquid sensible heat transfer",
      "Typical Max Heat Flux": 450,
      "Effective Thermal Conductivity": 1500,
      "Active Power Requirement": "Active pump",
      "Primary Governing Standard": "ASME PTC 12.5"
    },
    {
      "Technology": "Single-Phase Dielectric Immersion",
      "Primary Thermal Mechanism": "Direct-contact liquid natural or forced convection",
      "Typical Max Heat Flux": 100,
      "Effective Thermal Conductivity": 800,
      "Active Power Requirement": "Active pump or circulation",
      "Primary Governing Standard": "IEEE 2969"
    }
  ],
  "sources": [
    {
      "title": "JEDEC JESD51 Thermal Measurement Standards",
      "url": "https://www.jedec.org/standards-documents/docs/jesd-51-1",
      "accessed": "2026-11-14"
    },
    {
      "title": "ASTM C177 Guarded-Hot-Plate Thermal Transmission",
      "url": "https://www.astm.org/c0177-19.html",
      "accessed": "2026-11-14"
    },
    {
      "title": "NASA GSFC-STD-7000B General Environmental Verification Standard",
      "url": "https://standards.nasa.gov/standard/GSFC/GSFC-STD-7000",
      "accessed": "2026-11-14"
    },
    {
      "title": "ASME PTC 12.5 Single Phase Heat Exchangers",
      "url": "https://www.asme.org/codes-standards/find-codes-standards/ptc-12-5-single-phase-heat-exchangers",
      "accessed": "2026-11-14"
    },
    {
      "title": "IEEE 2969 Continuous Thermal Monitoring of Electrical Equipment",
      "url": "https://standards.ieee.org/ieee/2969/",
      "accessed": "2026-11-14"
    }
  ]
}