Ask a research-administration question
Answers are drawn from CASRAI and the rest of the CASRAI corpus, with a link to every source.
Answers are AI-generated from CASRAI’s own published pages and can be wrong, so check the linked sources before relying on one; your question is logged without personal data — never sold, never used to train a third-party model — to show us what CASRAI is missing, so please do not type personal or confidential details. How we use this
CASRAI is the reference for research administration — bookmark it for the next question.
SKU USA-XHM-10L
USA Lab
10L HeatPro™ Digital Heating Mantle - 300°C 2500RPM - USA-XHM-10L
$1,499.00
In stock10 L digital heating mantle with PID temperature control to 300 °C and brushless-DC magnetic stirring to 2500 rpm. Rated 110–120 V, 2100 W, 19.1 A — the highest current draw in the HeatPro range on a 120 V supply, so check the branch circuit before installing. Auto-tune, over-temperature protection and probe-fault detection included.
Buying through procurement?
Generate a formal quotation for 1 × this item, plus our W-9 — everything your finance department needs to raise a purchase order.
Ordering several items? Add them to your cart, then create one quote for the whole cart.
Description
The HeatPro XHM-10L is a 10 L digital heating mantle with an integrated magnetic stirrer. Heating is PID-controlled with an auto-tune routine that can be re-run at the actual working temperature, stirrer speed, fluid type and fill volume, and the display carries the process value, the setpoint and the current stirrer rpm together.
At 2100 W the 10 L draws 19.1 A on a 110–120 V supply — materially more than the smaller mantles in the series and more than a standard 15 A branch circuit will carry continuously. Confirm the receptacle and circuit rating at the intended bench position before ordering.
Specifications
- Capacity: 10 L
- Maximum temperature: 300 °C
- Maximum stirrer speed: 2500 rpm
- Power: 110–120 V, 2100 W, 19.1 A
- Stirrer motor: 24 V, 40 W brushless DC
- Overall dimensions: 420 × 420 × 315 mm (16.5 × 16.5 × 12.4 in)
- Gross weight: 48.5 lb
Control and protection
- PID heater control with auto-tune / auto-calibration
- Over-temperature protection
- Temperature probe fault detection — alarm plus an Er-1 display code
- Internal and external probe options, selected by swapping the external probe for the supplied jumper plug in the probe socket
- Digital rpm display
Flask support
The documented stand assembly uses a vertical pole installed into the rear half of the mantle top, a boss clamp on the pole, and a finger clamp adjusted to centre on the flask neck.
Frequently asked questions
What electrical supply does the 10 L mantle need?+
110–120 V, 2100 W, 19.1 A. That is the highest draw in the HeatPro mantle range on a 120 V supply and exceeds what a standard 15 A branch circuit carries continuously, so the circuit and receptacle rating should be confirmed before installation.
What are the maximum temperature and stirring speed?+
300 °C and 2500 rpm, under PID control with an auto-tune routine that should be run at the intended working temperature, speed, fluid and fill volume.
What are the dimensions and shipping weight?+
420 × 420 × 315 mm (16.5 × 16.5 × 12.4 in), 48.5 lb gross.
Does it take an external temperature probe?+
Yes, and an internal sensor as well. The external probe plugs into the probe socket; swapping it for the jumper plug supplied in the accessories selects the internal sensor. A failed probe raises an alarm and an Er-1 display code.
Do I need a magnetic stir bar?+
Yes. The manual requires a magnetic stir bar in the flask and states that heating must not be run without the stirrer enabled.
How should it be shut down, and is heating noise normal?+
Disable heating first and leave the stirrer running until cooled — a minimum of 20 minutes per the manual. Creaking and cracking noises during heat-up are documented as normal for the 5 L, 10 L and 20 L sizes.
