Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Quick answer: a 24-well plate is a microplate with 24 wells. Footprint is standardized, but well geometry is not. For one listed product, the Corning Costar 24-well clear TC-treated plate (cat. 3524), each well has about 1.9 cm² of growth area and a 3.4 mL total volume, with 0.38-0.57 mL recommended for medium.
Who uses it: cell culture and assay labs working at a scale between 6-well and 96-well formats.
What a 24-well plate is
A 24-well plate is a lidded, multiwell culture vessel with 24 separate wells in one plate. It sits between larger-well formats and the 96-well format covered in 96-well plate dimensions. For the general concept, see what a microplate is.
Footprint: what the standard fixes
ANSI/SLAS 1-2004 (R2012), Footprint Dimensions, defines the outer footprint of a microplate, measured at 20 °C. Within 12.7 mm of the corners the length is 127.76 mm ± 0.25 mm and the width is 85.48 mm ± 0.25 mm; along the sides the tolerance is ± 0.5 mm. Corning describes its 24-well plate as having a uniform footprint for stacking.
| Dimension | Value | Source |
|---|---|---|
| Footprint length (near corners) | 127.76 mm ± 0.25 mm | ANSI/SLAS 1-2004 (R2012), 4.1.1.1 |
| Footprint width (near corners) | 85.48 mm ± 0.25 mm | ANSI/SLAS 1-2004 (R2012), 4.1.1.1 |
| Tolerance along the sides | ± 0.5 mm | ANSI/SLAS 1-2004 (R2012), 4.1.1.2 |
Growth area and volume per well
| Specification (Costar 3524) | Listed value |
|---|---|
| Plate format | 24-well |
| Growth area | 1.9 cm² (approx.) |
| Well volume | 3.4 mL |
| Recommended medium volume per well | 0.38-0.57 mL |
| Lids | Included; nonreversible with condensation rings |
| Surface and sterility | Clear, TC-treated; sterilized by gamma irradiation |
Source: Corning ecatalog, Costar 24-well clear TC-treated plate, cat. 3524, checked 2026-10-31. Note the gap between total well volume (3.4 mL) and recommended medium volume (0.38-0.57 mL): the first is capacity, the second is the working range the manufacturer lists. For seeding arithmetic, see the cell dilution calculator guide; for the 96-well equivalent, see 96-well plate volume. For growth areas and medium volumes across other vessel formats, see the cell culture reference numbers.
What the standards do not set for 24-well plates
ANSI/SLAS 4-2004 (R2012), Well Positions, defines well positions only for 96-well (section 4.1), 384-well (4.2) and 1536-well (4.3) microplates. It contains no 24-well position table, so well spacing and the A1 offset of a 24-well plate are set by each manufacturer. Well diameter, plate height and material are likewise manufacturer-specific: confirm them on the datasheet of the exact catalog number you use.
Common mistakes
- Treating total well volume (3.4 mL for the Costar 3524) as the amount of medium to add; the listed recommended range is 0.38-0.57 mL.
- Assuming growth area from one product applies to every 24-well plate; the figure above is for cat. 3524 only.
- Assuming a 96-well well-position standard describes a 24-well plate; ANSI/SLAS 4 does not cover it.
FAQ
How big is a 24-well plate?
Microplate footprints are defined by ANSI/SLAS 1-2004 (R2012) as 127.76 mm by 85.48 mm near the corners (± 0.25 mm). Corning lists its 24-well plate with a uniform footprint for stacking; check the manufacturer datasheet for the exact outer dimensions of a given catalog number.
How much volume does a 24-well plate hold?
For the Costar 3524, each well holds 3.4 mL, and Corning recommends 0.38-0.57 mL of medium per well.
What is the growth area of a 24-well plate well?
Approximately 1.9 cm² per well for the Costar 3524, per Corning.
Sources
- Corning ecatalog, Costar 24-well Clear TC-treated plate, cat. 3524, https://ecatalog.corning.com/life-sciences/b2b/US/en/p/3524, checked 2026-10-31.
- ANSI/SLAS 1-2004 (R2012) Footprint Dimensions, https://slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_1-2004_FootprintDimensions.pdf, checked 2026-10-31.
- ANSI/SLAS 4-2004 (R2012) Well Positions, https://www.slas.org/SLAS/assets/File/public/standards/ANSI_SLAS_4-2004_WellPositions.pdf, checked 2026-10-31.







