Skip to main content
v2026.11,986 entries · CC-BY 4.0

ACS Measurement Science Au: Journal Profile

A journal profile covering chemical measurement research, manuscript preparation, open access policies and the indexing recorded by NLM.

Written and maintained by CASRAI Editorial Board

Published

On this page

ACS Measurement Science Au is an open access journal published by the American Chemical Society for research in chemical measurement science. It covers experimental, computational and theoretical work across sampling, measurement and data analysis, including analytical methods, instrumentation, sensing, spectroscopy and separations.

What ACS Measurement Science Au is

The journal serves researchers developing measurement methods and explaining how those methods advance analytical science. Its official author guidelines welcome original research as well as reviews and perspectives. The important scope test is the contribution to measurement: a paper using an established technique must offer a significantly improved, original application of that technique.

The National Library of Medicine records the journal as an English-language online periodical published by the American Chemical Society, beginning in 2021. Its electronic ISSN is 2694-250X, its NLM title abbreviation is ACS Meas Sci Au, and its recorded publication frequency is bimonthly. Those identifiers are useful when matching a journal across a library catalog, an article record and a publisher page.

This profile describes publisher policies and index records checked on November 17, 2026. The author guidelines carry an October 5, 2026 revision date. For readers, the journal provides access to chemical measurement research; for prospective authors, its scope and manuscript requirements establish the starting point for assessing a submission.

Who publishes it and what it covers

The American Chemical Society publishes ACS Measurement Science Au within its measurement science portfolio. The journal’s scope includes chemical reactions and selectivity, chemometrics and data processing, electrochemistry, elemental and molecular characterization, imaging, instrumentation, mass spectrometry, microscale and nanoscale systems, omics, sensing, separations, spectroscopy and surface analysis.

This breadth includes work at different stages of an analytical operation. A sampling contribution, a measurement approach and an advance in data analysis can each fall within the stated scope. Experimental work is therefore one route into the journal, alongside computational and theoretical research. The common requirement is a substantive advance relevant to chemical measurement science.

Scope alone does not establish that a manuscript meets the editorial threshold. The guidelines say that Articles should provide a significant advance, with originality, significance and conceptual novelty. Routine extensions of earlier work may be declined or recommended for transfer. Expanding a previously published Letter with additional experimental data, without greatly expanded scope or new insights, is also identified as insufficient.

The distinction matters when writing the cover letter. The journal requires an explanation of why the manuscript belongs in ACS Measurement Science Au and what advances it makes relative to existing work. Naming an instrument or a technique from the scope list does not replace that explanation.

Impact factor and indexing

ACS reports a 2025 Journal Impact Factor of 14.7 for ACS Measurement Science Au in its official June 18, 2026 metrics announcement. The metric year is 2025; 2026 is the year of that announcement. Retaining both dates prevents a journal profile from turning a dated indicator into an undated standing claim.

ACS describes the Journal Impact Factor as a measure of how often an average article in a journal is cited within a specified time window. For background on the indicator, see the Journal Impact Factor definition. A citation indicator and a manuscript’s fit address different questions: the journal’s own scope and originality requirements still govern what it considers suitable.

The NLM Catalog lists PubMed coverage beginning with volume 1, number 1, August 2021, and also lists PMC. It separately states that the journal is not currently indexed for MEDLINE. These are the catalog’s distinct entries, and they should remain distinct when describing the journal’s indexing. A report based on this record should reproduce its specific coverage statements rather than substitute a broader indexing label.

The data table below brings together bibliographic identity, the dated impact factor and publisher policy facts. It identifies the authority for each entry so that a researcher or research office can distinguish a catalog statement from a publisher requirement.

How to prepare a submission

The official guidelines direct manuscript submission through the ACS Publishing Center. The following preparation sequence uses the journal’s documented requirements and section names. It covers the materials to prepare before submission; the sign-in is at the ACS Publishing Center.

  1. Read “Scope of the Journal” and choose a manuscript type. Match the scientific contribution to the stated scope, then use the requirements for an Article, Letter, Review, Perspective or other applicable category. The journal also describes Tutorials for readers learning a topic or method.
  2. Apply “Submit with Fast Format.” Initial submissions must be complete, with clearly identified sections and numbered, labeled components. Embed figures, tables, schemes and equations at the relevant point in the text. References may initially use any style, but must be complete and include article titles. A document template is not required.
  3. Prepare the “Cover Letter.” Explain the manuscript’s fit and scientific advance, identify the corresponding author, and disclose relevant prior submissions and preprints. The letter must assure the journal that the manuscript is not already published or under consideration elsewhere, subject to the stated preprint policy.
  4. Assemble “Supporting Information.” Supply it with the manuscript as separate files, distinguishing material for publication from material for review only. Describe the actual contents and file types. The journal rejects vague descriptions such as a list of figure numbers without an explanation of what those figures contain.
  5. Reconcile author and funding records. Keep author order, affiliations and title consistent across submission materials and the electronic entry. Report every author’s funding sources and grant or award numbers in both the manuscript and the Funder Registry Tool. Arrange validation of the submitting author’s ORCID iD before completing a revision if it is not already linked.
  6. Check graphics and required disclosures. Include the required table-of-contents graphic, obtain coauthor consent and supply the conflict-of-interest statement. For manuscripts reporting experimental procedures, the guidelines require an affirmative safety statement in the relevant main-text section. Submit the assembled materials digitally through the ACS Publishing Center.

Articles, Letters, Reviews and Perspectives

Articles should be thorough but concise; their abstracts are typically limited to 300 words. Letters have a 2,200-word limit covering the abstract, main text and specified graphical text, with references excluded. The journal’s counting instructions exclude the title, author details and material after the main text. Use those instructions when checking a Letter’s length.

Reviews critically organize existing research and identify challenges and opportunities. Perspectives are more focused, offering an assessment of a field and its future direction. Authors considering either format are strongly encouraged to contact the editor before preparing the manuscript. The requested proposal includes a focused description of about 400 words, five to ten foundational references, and an explanation of how the proposed contribution differs from recent reviews.

Peer review and open access

The current author guidelines describe critical, single-anonymized peer review, with the editor retaining the final decision on suitability. They also state that the journal will neither confirm nor deny speculation about reviewer identities. The peer review definition provides broader terminology; the journal’s own policy specifies the model applicable here.

Suggesting reviewers is optional. If authors do so, the submission checklist requests at least four scientists from at least three countries. Suggested reviewers must not be former mentors or mentees, or collaborators or coauthors from the preceding five years. Recommendations may be considered, but the journal says they cannot always be accommodated.

Authors retain copyright and may publish under CC BY or CC BY-NC-ND according to the journal’s Open Access Compliance section. These are separate license choices, so the selected license should be recorded accurately when documenting a publication. The open access definition supplies context for access terminology.

ACS’s Open Science guidance describes CC BY as permitting broad reuse, including commercial reuse, with attribution and integrity maintained. CC BY-NC-ND permits noncommercial access and reuse but restricts adaptations without the copyright holder’s permission. The same guidance advises authors to consider the license required by their institution or funder. Free reading access therefore does not make the two licenses interchangeable for reuse.

The guidelines direct authors to ACS’s Open Access Pricing for Authors guide for article publishing charges and to its Open Science information for institutional read-and-publish eligibility and funder requirements. That separates the journal’s access model from the administrative question of how a particular author’s publication is supported. Consult the official schedule and the applicable institutional arrangement when preparing a publication budget.

Data, preprints and author records

ACS Measurement Science Au applies ACS Research Data Policy Level 1. The journal encourages authors to share the data underlying their results publicly, preferably in an appropriate repository, and encourages a Data Availability Statement. Public datasets should be cited. The policy’s wording matters: encouragement to share data should not be rewritten as a universal mandatory repository-deposit requirement.

The guidelines define research data broadly enough to include primary data, reused or analyzed secondary data, and other materials needed to validate or reproduce conclusions. They also require the main Experimental Section to contain enough information to understand and repeat the experiment without referring to Supporting Information. Important, unique experimental procedures must remain in the manuscript even when further detail appears in supplementary files.

Preprints are permitted before acceptance. Authors should disclose the preprint and its link in the cover letter and explain relevant changes between deposition and submission. They may revise the preprint until a final acceptance decision. After publication, they should add a link from the preprint to the published article through its DOI; the guidelines note that some services add that link automatically.

Author identification also has a specific workflow. ACS publishes ORCID iDs that have been validated and linked before acceptance, rather than identifiers typed into the manuscript or supplied during proof review. The journal requires authors submitting revisions to provide their own validated ORCID iD if it is not already associated with their profile. Later changes to authorship require the prescribed form, author agreement and editorial approval.

Strengths and limits

The journal’s stated breadth is useful for measurement research that crosses experimental techniques or combines instrumentation with computational analysis. Its policies address the full publication record: manuscript preparation, supporting files, data citation, preprints, funding and author identifiers. For a research office, these provide concrete fields to reconcile before submission and when recording the final output.

The limits are equally specific. Broad subject coverage comes with a requirement for a significant contribution; a familiar analytical method applied routinely does not meet the journal’s stated originality expectation. The availability of several manuscript types also brings different preparation requirements. A Review proposal and a Letter should not be treated as interchangeable submission packages.

Transfer offers are another distinction to preserve. The journal may suggest transferring a declined manuscript to another ACS or partner journal, copying submission materials to a new draft. Authors can accept or decline. The receiving journal remains editorially independent, and a transfer does not guarantee acceptance. The journal’s publication policy also treats first web publication as the publication date, which may precede the issue cover date.

Alternatives for measurement research

ACS’s official measurement science portfolio describes several neighboring journals. The table compares their stated subject emphases. It provides a scope shortlist, without inferring acceptance prospects or selecting a journal solely from its citation indicator.

Journal Emphasis described by ACS Scope distinction to examine
Analytical Chemistry Advances in chemical measurement science, from fundamentals to innovative applications The contribution to chemical measurement across fundamental and applied work
ACS Sensors Research related to sensor science Whether sensor science is the central contribution
Journal of Proteome Research Global protein and metabolite analysis and function Whether protein or metabolite analysis defines the paper’s focus
Journal of the American Society for Mass Spectrometry All aspects of mass spectrometry, including applications and fundamentals Whether the work is centered on mass spectrometry

These descriptions come from ACS’s measurement science portfolio. For more context on the sensor-focused option, see the ACS Sensors journal profile. ACS Measurement Science Au’s own scope remains the relevant benchmark when the contribution spans chemical measurement methods, sampling and data analysis.

Sources

Data: ACS Measurement Science Au: identity, indexing and publication policy evidence

An original compilation joining the NLM Catalog journal record with ACS author policies and its dated metrics announcement. Each row names its authority; bibliographic coverage and publisher requirements are kept distinct. Policies and catalog status checked November 17, 2026; the Journal Impact Factor is for 2025.

Period covered: 2025/2026.

ACS Measurement Science Au: identity, indexing and publication policy evidence
Record or policy fieldRecorded valueAuthority
Electronic ISSN2694-250XNLM Catalog
Publication start year2021NLM Catalog
PubMed coverageVolume 1, number 1, August 2021 onwardNLM Catalog
MEDLINE indexingNot currently indexed for MEDLINENLM Catalog
2025 Journal Impact Factor14.7ACS Publications metrics announcement, June 18, 2026
Peer reviewSingle-anonymized peer review; editor makes final suitability decisionACS author guidelines
Research data policyLevel 1: public data sharing and Data Availability Statement encouragedACS author guidelines
Open access license choicesCC BY or CC BY-NC-ND; authors retain copyrightACS author guidelines

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about ACS Measurement Science Au: Journal Profile

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →