Skip to main content
v2026.11,986 entries · CC-BY 4.0

America Makes: What the National Additive Manufacturing Innovation Institute Is

What America Makes is, who runs it, how its AFRL cooperative agreement and satellite centers work, and who its 300+ members are.

Written and maintained by CASRAI Editorial Board

Published

On this page

America Makes is the national additive manufacturing (AM, or 3D printing) innovation institute of the United States: a non-profit-run, membership-based consortium in Youngstown, Ohio that brings industry, universities and government together to move AM technology into production use. It was established on 12 August 2012 and is one of the institutes in the Manufacturing USA network. It funds and coordinates collaborative projects and workforce programmes; it is not a regulator, a standards body or a printer manufacturer.

Definition and scope

In its own August 2025 overview, America Makes calls itself “The National Additive Manufacturing Innovation Institute” and states its vision as “to be the driver for additive manufacturing (AM) innovation, technology, and education”. Its mission is to “accelerate the adoption of AM to advance U.S. manufacturing competitiveness and security”. Manufacturing USA describes it as “a national accelerator and the nation’s leading collaborative partner for technology research, discovery, creation, and innovation in additive manufacturing and 3D printing”, tagged under Materials, Material Processing and Lightweighting.

Two features of the legal and funding structure explain how the organisation behaves. The institute’s non-profit legal entity is the National Center for Defense Manufacturing and Machining (NCDMM), and its contract vehicle is a cooperative agreement managed through the Air Force Research Laboratory (AFRL). A cooperative agreement is an assistance instrument in which the funding agency stays substantially involved, which is why the institute operates as a programme partner of the government rather than as an independent grant-making foundation; the grant, contract and cooperative agreement comparison explains the differences.

How America Makes works in practice

The institute describes its work as three verbs: convening government, industry and academia; coordinating AM technical and workforce data; and catalyzing industry through collaborative projects. Its overview organises activity into three focus areas:

  • Technology development: identifying gaps in AM technology through a roadmap and funding projects to close them.
  • Education and workforce development: developing industry-recognised credentials, standards and pathways in AM. Examples the institute cites include an updated credential framework, a new e-learning module and national workshops for underserved and veteran populations.
  • Industrial base integration: for example, qualification and certification criteria, and the use of AM in the Air Force supply chain to sustain legacy aircraft, with reduced lead time and greater design flexibility.

Collaborative projects are the institute’s main instrument. Its fact sheet reports a total portfolio of $581.9 million (expenditures plus cost share) across 364 projects, 107 of them active, as of the August 2025 overview. The institute also operates three satellite centers: the University of Texas at El Paso (UTEP), the Texas A&M Engineering Experiment Station (TEES) and the National Institute for Aviation Research (NIAR) at Wichita State University. A satellite center is set up under a memorandum of understanding between the host organisation and America Makes, and the host is a Platinum or Gold member represented on the Executive Committee. The institute’s convening space in downtown Youngstown covers 12,000 square feet.

The data table below compiles the fact sheet and membership figures from that overview into one dataset.

America Makes is one of 18 institutes in Manufacturing USA, alongside AFFOA, AIM Photonics, ARM, BioFabUSA, BioMADE, CESMII, CyManII, EPIXC, FutureTEX, IACMI, LIFT, MxD, NIIMBL, NextFlex, PowerAmerica, RAPID and REMADE. Manufacturing USA says the network was created in 2014 to secure U.S. global leadership in advanced manufacturing, and that institutes “convene business competitors, academic institutions, and other stakeholders to test applications of new technology, create new products, reduce cost and risk, and enable the manufacturing workforce”. The network is operated by the interagency Advanced Manufacturing National Program Office, headquartered in NIST at the Department of Commerce, and partners with DoD, DOE, NASA, NSF and the Departments of Education, Agriculture, Health and Human Services and Labor.

Each of the three organisations in the funding chain plays a different part: AFRL manages the cooperative agreement, NCDMM is the non-profit entity that runs the institute, and America Makes is the institute itself, with its members. Research administrators who meet defence and industry-facing programmes will also recognise the technology readiness level scale as the usual way to describe how mature a technology is before it is adopted by industry.

Who the members are and what they have in common

America Makes reports more than 300 members across 42 states as of July 2025, drawn from industry, academia, government, workforce and economic-development organisations. Small businesses are half of the membership, and industry as a whole makes up about two-thirds. Defense and aerospace lead the industry mix at 17% each, but medical is 9%, a share that matters to readers in clinical and laboratory settings. The full percentage breakdown is in the dataset below.

Membership has grown steadily: the overview’s membership-by-fiscal-year chart starts at 18 members in FY12 and reaches about 302 by the end of the series, and the institute describes the last three years as a period of substantial growth. Separately, its overview describes a Youngstown Innovation Hub for Aerospace and Defense whose stated vision is to establish the Hub as the epicenter for market-ready AM technologies that strengthen the aerospace and defense industrial base, with the aim of attracting aerospace and defense supply chain partners to the region.

For a university or research laboratory, the practical points the overview supports are limited but concrete. Academic organisations are 15% of the membership, so universities are an established member class; three university-hosted satellite centers exist; and the institute’s own project and workforce programmes are carried out through collaborative projects funded under the AFRL cooperative agreement. The terms of any particular project call, membership tier or cost-share rule are set by the institute for that call and are not given in the overview.

Where it matters for labs, clinics and supply decisions

The institute’s overview includes its own list of why AM adoption is not finished. It is a useful, authoritative checklist for anyone evaluating printed parts or printed lab equipment, because each item is a quality question:

Challenge listed by America Makes Known limitation listed by America Makes
Repeatability and reproducibility Limited commercially available materials
Qualification of material, process and product Limited qualified sources of supply
Qualification cost and efficiency; equivalence and requalification efficiency Limited implementation of design for additive manufacturing (DFAM)
Inspectability Limited trained workforce
Fracture-critical parts and certification Limited part size and feature size
Cost and scaling to full production Best suited to high-mix, low-volume work
Vendor qualification Serviceability and maintenance not well understood

The pairing is not row-for-row; the two columns are the institute’s two separate lists. Readers who buy or qualify printed items can read them against the site’s own guidance on biocompatible 3D printing materials, metal powder for 3D printing, facility qualification and 3D-printed concrete, which show how material, process and vendor qualification questions appear in different settings.

Common misunderstandings

America Makes is not a government agency

It is a non-profit-run institute (legal entity NCDMM) that operates under a cooperative agreement managed by AFRL. The funding relationship is with the Air Force Research Laboratory; the institute is not part of it.

It is not a standards body or regulator

The institute works on qualification and certification criteria and credentials as part of its focus areas, but its overview presents these as project outputs and roadmap work, not as binding rules. Regulatory requirements for a printed product come from the regulator or customer that governs that product.

It does not sell printers

The institute’s stated role is convening, coordinating and catalyzing, not selling machines or materials.

Membership does not mean funding

Joining a consortium and winning project funding are separate things. The overview describes projects as the way the institute catalyzes industry; it does not state that membership carries any funding entitlement, so treat the terms of each project call as the governing document.

It is not defence-only

Defense is the largest single industry share at 17%, tied with aerospace, yet the membership spans automotive, energy, medical, consumer goods, electronics, construction, agriculture and IT.

Frequently asked questions

What is America Makes?

The National Additive Manufacturing Innovation Institute, a Manufacturing USA institute based in Youngstown, Ohio, established 12 August 2012, that accelerates adoption of additive manufacturing through member collaboration and funded projects.

Who runs America Makes?

The non-profit National Center for Defense Manufacturing and Machining (NCDMM) is its legal entity, and the Air Force Research Laboratory manages the cooperative agreement under which it operates.

How many members does America Makes have?

More than 300 as of July 2025, across 42 states.

Where are the America Makes satellite centers?

At the University of Texas at El Paso, the Texas A&M Engineering Experiment Station and the National Institute for Aviation Research at Wichita State University.

Is America Makes part of Manufacturing USA?

Yes. It is one of the 18 institutes listed by Manufacturing USA.

Sources

Data: America Makes institute fact sheet and membership composition (2025)

Compilation of the America Makes institute fact sheet and its membership breakdown by organization type and by industry, taken from the institute's own August 2025 overview slides and cross-checked against Manufacturing USA's institute page. Percentages are shares of more than 300 members.

Period covered: 2025. Coverage: United States.

America Makes institute fact sheet and membership composition (2025)
ItemMeasureValue
Institute fact: establishedDate12 August 2012
Institute fact: locationPlaceYoungstown, Ohio
Institute fact: legal entityOrganisationNCDMM
Institute fact: contract vehicleInstrumentCooperative agreement managed through AFRL
Institute fact: members (July 2025)Count300+ across 42 states
Institute fact: projectsCount364 total, 107 active
Institute fact: total portfolioUSD millions581.9
Members by organization type: Small business% of members50
Members by organization type: Large business% of members16
Members by organization type: Academic% of members15
Members by organization type: Federal agency, lab or FFRDC% of members13
Members by organization type: Not-for-profit% of members6
Members by industry: Defense% of members17
Members by industry: Aerospace% of members17
Members by industry: Automotive% of members11
Members by industry: Energy% of members11
Members by industry: Medical% of members9
Members by industry: Government% of members7
Members by industry: Consumer% of members5
Members by industry: Electronics% of members5
Members by industry: Construction% of members5
Members by industry: Agriculture% of members4
Members by industry: IT% of members4
Members by industry: Other% of members4

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about America Makes: What the National Additive Manufacturing Innovation Institute Is

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →