Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General information only; this page is not medical advice and does not describe any procedure.
Short answer
An amputation knife is a large, hand-held surgical knife made for cutting through soft tissue during limb amputation. The most widely known historical pattern is the Liston knife, named after the Scottish surgeon Robert Liston. In US regulation it is not a separate device category: FDA lists "Knife, Amputation" (product code GDN) as a Class I device under 21 CFR 878.4800, the rule for manual surgical instruments for general use.
Definition and scope
The phrase covers two different things that are easy to mix up. Historically it names a family of long-bladed knives, often sold as part of a cased amputation set, with patterns named after surgeons. In regulatory and procurement language it is a product-code entry for a manual surgical knife. Both meanings point at the same kind of object, a non-powered, hand-held cutting instrument, but only the second carries a classification.
The regulation, 21 CFR 878.4800, describes a manual surgical instrument for general use as a nonpowered, hand-held or hand-manipulated device, either reusable or disposable, intended for use in various general surgical procedures. It is Class I (general controls) and exempt from premarket notification, subject to the limitations in 21 CFR 878.9. Its general-use list includes scalpels, forceps and retractors, and it names "knife" among the instruments covered; a surgical instrument with specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892. For a plain-language look at the everyday knife, see what a scalpel is; for the small curved knife with a narrow blade, see the bistoury.
How it was used in practice
Museum records describe the purpose in general terms. Ingenium, Canada's science and technology museums, records a Liston-pattern amputation knife as an instrument used to cut through soft tissue and expose the long bones of the leg, thigh or upper arm. The same record explains why the pattern mattered: Liston is largely credited with re-introducing the flap method of amputation, in place of the earlier circular method that used a sickle-like curved blade. According to that record, the flap method reduced the time needed to cut through to bone and produced a more useful stump. It also notes that Liston advocated instruments sized in proportion to the amputation, with long blades for thigh amputations, and smooth or polished handles.
The Royal College of Physicians and Surgeons of Glasgow Heritage collection adds that the shape of amputation blades changed over time from curved to straight.
Types and related instruments
Museum-dated examples side by side
| Record | Pattern and maker | Date | Length | Materials |
|---|---|---|---|---|
| Royal College of Physicians and Surgeons of Glasgow, item 2003/199.1 | Liston amputation knife, W. B. Hilliard & Sons Ltd.; part of an amputation set | c. 1860s | 32 cm | Metal and ebony |
| Ingenium, artifact 2002.0579.005 | Knife, amputation, Liston's medium; Tiemann & Co., New York | 1864 to 1886 | 30.0 cm | Metal blade; handle recorded as dark gutta-percha (query noted in the record) |
Two records are not a survey, but they show the typical scale of the pattern: both are roughly 30 cm long overall, far larger than a modern scalpel. They also show that handle material was part of how these instruments were described, with an ebony handle in one case and a deeply checkered handle in the other that the Ingenium record calls an older, pre-aseptic style.
Related pages on CASRAI
Other cutting and surgical instruments are covered in orthopedic surgical instruments, surgical scissors types and the comparison 10 blade vs 15 blade.
Where it matters for labs, clinics and supply decisions
Staff who meet the term in a catalogue, a teaching collection or an instrument-set list can use this checklist, drawn from the records and the regulation above:
- Pattern name, such as Liston, and whether it is a historical or a current pattern.
- Maker and date, which museum records give and which help separate an antique from a current product.
- Overall length and materials, for example metal with ebony or gutta-percha handle versus an all-metal instrument.
- Reusable or disposable, a distinction 21 CFR 878.4800 itself draws for general-use manual instruments.
- Regulatory entry: FDA product code GDN, "Knife, Amputation", Class I, regulation 878.4800, alongside the general "Knife, Surgical" code EMF under the same regulation.
A Class I listing is a statement about regulatory classification and general controls. It says nothing about the quality of a given knife, and this page makes no recommendation about any product.
Common misunderstandings
- "Liston knife" names a surgeon and a pattern, not a brand. Many makers produced knives to the pattern; the records above name Hilliard and Tiemann.
- A museum record is not a product specification. The lengths and materials above describe two preserved objects.
- No separate regulation exists for the amputation knife. It sits under the general-use manual instrument rule, with its own product code.
- Blade shape was not fixed. The Glasgow record describes a change over time from curved to straight blades.
FAQ
What is an amputation knife?
A large hand-held surgical knife designed to cut soft tissue during limb amputation, most widely known in the Liston pattern.
Who was Liston?
Robert Liston was a Scottish surgeon after whom the knife is named; Ingenium credits him with re-introducing the flap amputation.
How is an amputation knife classified by FDA?
As "Knife, Amputation", product code GDN, Class I, under 21 CFR 878.4800, as recorded in the openFDA device classification database (database last updated 2026-10-19, checked 2026-10-30).
How long was a historical amputation knife?
The two museum examples recorded here measure 32 cm and 30.0 cm.
Sources
- eCFR, 21 CFR 878.4800, Manual surgical instrument for general use, https://www.ecfr.gov/current/title-21/chapter-I/subchapter-H/part-878/subpart-E/section-878.4800 (checked 2026-10-30).
- openFDA device classification, product code GDN (Knife, Amputation) and EMF (Knife, Surgical), https://api.fda.gov/device/classification.json (checked 2026-10-30).
- Royal College of Physicians and Surgeons of Glasgow Heritage, Liston Amputation Knife, https://heritage.rcpsg.ac.uk/items/show/86 (checked 2026-10-30).
- Ingenium, Canada Science and Technology Museums, Knife, amputation, artifact 2002.0579.005, https://collection.ingenium.ca/en/id/2002.0579.005 (checked 2026-10-30).







