Written and maintained by CASRAI Editorial Board
Published
On this page
ASTM D7566 is the specification for aviation turbine fuel containing synthesized hydrocarbons: it sets the requirements that a non-petroleum jet fuel blending component, and the blend it is made into, must meet before it can be treated as ordinary jet fuel. The fuel is not flown under D7566 itself. Once a batch is produced, tested and released to D7566, it is recertified to ASTM D1655 and from then on is regarded as conventional Jet A or Jet A-1.
What ASTM D7566 is and what it covers
According to an ICAO information paper to the 14th Air Navigation Conference, D7566 covers the physical and chemical properties, performance characteristics and specifications for neat synthesized hydrocarbons and for blends of synthesized hydrocarbons with conventional jet fuel. The IATA technical fact sheet on sustainable aviation fuel (SAF) describes it as the standard that regulates technical certification of SAF: it decides which production technologies can deliver on-specification neat SAF, and how much of that neat product can be blended.
The standard is published by ASTM International and sold as a paid document, so its tables and annex clauses are not reproduced here. What can be described from public primary sources is its structure and its role in the certification chain: a main specification, plus one numbered annex for each approved production pathway. This guide covers that structure, the three-standard relationship with D4054 and D1655, the annex list, and the blend limits. It is general reference material for research offices, funders and laboratories that handle aviation-fuel research; it is not a substitute for the current edition of the standard.
How D4054, D7566 and D1655 fit together
Three ASTM documents are often confused because they appear in the same sentences. They do different jobs, and the order matters.
| Step | Standard | Role, as described by the sources read |
|---|---|---|
| 1. Qualify a new fuel | ASTM D4054 | The evaluation process for a new fuel or additive: specification properties, fit-for-purpose properties, component and rig testing, engine and auxiliary power unit testing, a research report and ASTM balloting (FAA presentation to the CAAFI general meeting, 2 June 2022). |
| 2. Specify the synthetic blend component | ASTM D7566 | If the fuel meets the drop-in requirement, a new annex is added to D7566. The synthetic blend component is tested before blending, then blended with conventional jet fuel (same presentation). |
| 3. Release the finished fuel | ASTM D1655 | A fuel manufactured, certified and released to all requirements of Table 1 of D7566 meets D1655 and is regarded as D1655 fuel (ICAO information paper). D1655 sets criteria for composition, volatility, fluidity, combustion, corrosion, thermal stability, contaminants and additives (IATA). |
The practical consequence is stated plainly in the ICAO paper: D7566 is not approved for flight unless the fuel is recertified as one of the approved fuel specifications. Airlines and airports therefore handle SAF that already carries a D1655 certificate, and the IATA fact sheet says that on release from blending the fuel is certified to D1655 and is regarded as conventional Jet A or Jet A-1. The AFDC page of the US Department of Energy adds that SAF must be blended with Jet A before it is used in an aircraft and that, because of the strict fuel-quality standards, it is preferable to certify SAF to D1655 upstream of an airport.
What D1655 is, and how it relates to Def Stan 91-091
ASTM D1655 and the UK Defence Standard 91-091 are the two widely used jet fuel standards, according to IATA. The ICAO paper adds that a fuel released to Table 1 of D7566 is also regarded as meeting Def Stan 91-091, CGSB 3.23-2020 and DCSEA 134 E. This is the answer to the common search for a D7566 “equivalent”: there is no separate equivalent standard for the synthetic blend specification, but the finished, released fuel is accepted under the other national jet fuel specifications named in that paper. The ICAO paper lists the main D1655 parameters as composition, freezing point, flash point, kinematic viscosity, smoke point, corrosiveness, water separation, energy content, additives and contaminants.
What ASTM D4054 does
D4054 is the practice that precedes any new annex. The FAA presentation describes its stages as specification-property testing, fit-for-purpose property testing, component and rig testing, engine and auxiliary power unit testing as a second phase, a research report filed with ASTM, and balloting. The evaluation determines whether the new fuel is backwards compatible with existing aircraft and infrastructure. The ICAO paper notes that D4054 is the evaluation process proposed as the basis for a mutually recognised clearinghouse between states.
The same presentation describes a Fast Track route within D4054. It is limited to a 10 percent blend and uses reduced, “lite” testing for fuels with nominal jet-fuel properties and composition. That is one reason some annex limits sit at 10 percent while others sit at 50 percent.
ASTM D7566 annexes and the approved pathways
Each approved production route has its own annex in D7566. The ICAO information paper counts eight pathways certified at the time it was written, in this order: Annex A1 FT-SPK (Fischer-Tropsch synthetic paraffinic kerosene); A2 HEFA-SPK (hydroprocessed esters and fatty acids); A3 SIP (synthesized iso-paraffins); A4 SPK/A (alkylation of light aromatics from non-petroleum sources); A5 ATJ-SPK (alcohol to jet); A6 CHJ (catalytic hydrothermolysis jet); A7 HC-HEFA SPK (hydrocarbon HEFA); A8 ATJ-SKA (alcohol to jet synthetic kerosene with aromatics). The data table below sets the first seven out with approval years and the blend limit given in the IATA fact sheet.
ASTM D7566 Annex A1
Annex A1 is the oldest. The FAA presentation records that D7566 was issued in June 2009 with the FT-SPK annex, and that D4054 followed in December 2009. A1 therefore marks the start of the framework, and later annexes follow the same sequence of D4054 evaluation first and annex addition second.
How the annex list has grown
According to the FAA presentation, A2 (HEFA-SPK) arrived in 2011 and A3 (SIP) in 2014. A4 (FT-SPK/A) followed in 2015. A5 (ATJ-SPK) was added in April 2016 for isobutanol and extended to ethanol in June 2018. A6 (CHJ) came in December 2019 and A7 (HC-HEFA) in May 2020. IATA gives the CHJ year as 2020, so sources differ by a few months at the edges; this guide uses the year ranges both agree on. The ICAO paper lists A8 (ATJ-SKA) as an eighth certified pathway.
Blend limits: why 50 percent, why 10 percent
The IATA fact sheet gives a maximum certified blend of 50 percent by volume for FT and FT-SPK/A, HEFA, ATJ and CHJ, and 10 percent for HC-HEFA and SIP. The FAA presentation lists three reasons for the limits: meeting jet fuel property requirements, conservatism until service experience builds up, and fast-track approval. The ICAO paper says the maximum share of SAF under the current framework is 50 percent because of the blending requirement, and that the current maximum is under 50 percent for some pathways.
Limits are revised as annexes are updated, and public summaries do not always agree. As described on the US Department of Energy AFDC page on 20 November 2026, the limit for ethanol-based ATJ-SPK is 30 percent, whereas the IATA fact sheet gives 50 percent for ATJ. The AFDC page also lists 5 percent for the two co-processing pathways, which belong to D1655 rather than to a D7566 annex: the FAA presentation shows co-processing as a separate D1655 activity, and the AFDC page says D1655 allows co-processing of biomass feedstocks at a petroleum refinery in blends up to 5 percent. Always read the current annex text for a binding limit.
Can SAF be used at 100 percent?
The ICAO paper says 100 percent SAF is technically possible only with specific waivers from national regulators. Most operations use blended fuel that is recertified to D1655, which is why the 50 percent ceiling is the figure usually quoted.
Which standard does what: quick reference
| Question | Answer from the sources |
|---|---|
| Which standard qualifies a new alternative fuel? | ASTM D4054 (FAA presentation). |
| Which standard lists the approved pathways and blend limits? | ASTM D7566, one annex per pathway (ICAO; IATA; AFDC). |
| Which standard governs fuel as delivered to aircraft? | ASTM D1655, after recertification from D7566 (IATA; ICAO). |
| Is D7566 fuel approved for flight as it stands? | No, not unless recertified as one of the approved fuel specifications (ICAO). |
| Is 100 percent SAF allowed? | Only with specific waivers from national regulators (ICAO). |
Common mistakes when citing D7566
- Treating D7566 as the fuel standard airlines buy to. The finished, released fuel is D1655 fuel; D7566 governs the route to that point.
- Quoting one blend limit for every pathway. The limits differ by annex, and some secondary summaries differ from each other.
- Citing an old edition. ASTM reissues D7566 as annexes are added or revised, and the AFDC page says both D7566 and D1655 are continuously updated. State the edition you used in any report, grant application or lifecycle assessment.
- Mixing up the two jobs of D4054 and D7566. D4054 is the evaluation route; D7566 is the specification that results from it.
Where this fits in research and compliance work
For researchers developing a new fuel, the framework above is the route from a laboratory result to a fuel airlines can use: evaluation under D4054, then an annex in D7566, then D1655 recertification. For research offices that account for aviation-related emissions, the same chain explains why SAF claims depend on the certified pathway and blend share; see the CASRAI entries on carbon accounting in research and scope 1, 2 and 3 emissions for research organisations. For the aviation offsetting scheme that creates much of the demand for eligible fuels, see the guide to CORSIA. Standards of this kind are also what regulators recognise in other fields; the dictionary entry on FDA-recognized consensus standards shows the same pattern in device regulation.
Sources
- IATA: Sustainable Aviation Fuel: Technical Certification (fact sheet), checked 2026-11-20
- ICAO: Information paper AN-Conf/14-WP/25, 14th Air Navigation Conference, checked 2026-11-20
- FAA (Mark Rumizen) via CAAFI: Synthetic Aviation Turbine Fuel (SATF) ASTM Qualification Update, 2 June 2022, checked 2026-11-20
- US Department of Energy, Alternative Fuels Data Center: Sustainable Aviation Fuel, checked 2026-11-20
Data: ASTM D7566 annexes: pathway, approval year and maximum certified blend
One row per D7566 annex A1-A7, compiled from the IATA technical-certification fact sheet (pathway names, maximum blend in percent by volume) and the FAA/CAAFI qualification presentation (annex order and approval years). Where the sources differ on a year, the cell says so. Eighth annex A8 is omitted because no approval year or limit was read.
Period covered: 2009/2020.
| Annex | Pathway | Approval year | Maximum blend (% v/v) |
|---|---|---|---|
| A1 | FT-SPK (Fischer-Tropsch synthetic paraffinic kerosene) | 2009 | 50 |
| A2 | HEFA-SPK (hydroprocessed esters and fatty acids) | 2011 | 50 |
| A3 | SIP (synthesized iso-paraffins) | 2014 | 10 |
| A4 | FT-SPK/A (Fischer-Tropsch with aromatics, SPK/A) | 2015 | 50 |
| A5 | ATJ-SPK (alcohol to jet) | 2016 (isobutanol); 2018 (ethanol) | 50 |
| A6 | CHJ (catalytic hydrothermolysis jet) | 2019-2020 (sources differ) | 50 |
| A7 | HC-HEFA SPK (hydrocarbon HEFA) | 2020 | 10 |
Sources
- IATA: Sustainable Aviation Fuel: Technical Certification (accessed 2026-11-20)
- FAA/CAAFI: SATF ASTM Qualification Update (accessed 2026-11-20)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







