Skip to main content
v2026.11,986 entries · CC-BY 4.0

Barratt Impulsiveness Scale: Scoring and Norms

Score the Barratt Impulsiveness Scale (BIS-11), calculate 3 subscales, reverse-code items, and interpret scores with normative benchmarks and code examples.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

The Barratt Impulsiveness Scale (BIS-11) is a 30-item self-report questionnaire assessing trait impulsivity across cognitive, behavioral, and planning domains in research and clinical evaluation settings.

Definition in one paragraph

The Barratt Impulsiveness Scale (BIS-11) is a 30-item self-report psychometric instrument designed to assess multidimensional trait impulsivity rather than acute behavioral states. Developed by Ernest S. Barratt and formalized in its 11th revision by Patton, Stanford, and Barratt (1995), the scale measures three second-order domains: Attentional Impulsiveness, Motor Impulsiveness, and Nonplanning Impulsiveness. Items are scored on a 4-point Likert scale (1 = Rarely/Never, 2 = Occasionally, 3 = Often, 4 = Almost Always/Always), yielding a total composite score from 30 to 120, where higher scores signify greater impulsivity. The instrument is widely used in behavioral neuroscience and psychiatric research to quantify cognitive disinhibition and executive regulation without serving as a standalone diagnostic tool.

Formula with every symbol explained

Scoring the BIS-11 requires reverse-coding 11 positively keyed items and summing recoded items into three second-order subscales and a global composite score.

1. Reverse-Scoring Transformation

Eleven positively worded items are inverted so higher scores consistently indicate higher impulsivity, using the linear transformation formula for a 4-point scale ($k = 4$):

$$x_{i, text{recoded}} = (k + 1) – x_i = 5 – x_i quad text{for } i in R$$

Where $x_i in {1, 2, 3, 4}$ is the raw rating, $x_{i, text{recoded}}$ is the transformed score ($1 rightarrow 4, 2 rightarrow 3, 3 rightarrow 2, 4 rightarrow 1$), and $R = {1, 7, 8, 9, 10, 12, 13, 15, 20, 29, 30}$ is the set of 11 reverse items. For direct items ($i notin R$), $x_{i, text{recoded}} = x_i$.

2. Second-Order Subscales and Global Total

The 30 items group into three second-order factors:

  • Attentional ($S_{text{Att}}$): 8 items ($I_{text{Att}} = {5, 6, 9, 11, 20, 24, 26, 28}$; range 8–32):
    $$S_{text{Att}} = sum_{i in I_{text{Att}}} x_{i, text{recoded}}$$
  • Motor ($S_{text{Mot}}$): 11 items ($I_{text{Mot}} = {2, 3, 4, 16, 17, 19, 21, 22, 23, 25, 30}$; range 11–44):
    $$S_{text{Mot}} = sum_{i in I_{text{Mot}}} x_{i, text{recoded}}$$
  • Nonplanning ($S_{text{Non}}$): 11 items ($I_{text{Non}} = {1, 7, 8, 10, 12, 13, 14, 15, 18, 27, 29}$; range 11–44):
    $$S_{text{Non}} = sum_{i in I_{text{Non}}} x_{i, text{recoded}}$$
  • Total Score ($S_{text{Total}}$): Sum of all 30 recoded items (range 30–120):
    $$S_{text{Total}} = S_{text{Att}} + S_{text{Mot}} + S_{text{Non}} = sum_{i=1}^{30} x_{i, text{recoded}}$$
Factor Subfactors Items (* = Reverse) Count Range
Attentional Attention, Cognitive Instability 5, 6, 9*, 11, 20*, 24, 26, 28 8 8–32
Motor Motor, Perseverance 2, 3, 4, 16, 17, 19, 21, 22, 23, 25, 30* 11 11–44
Nonplanning Self-Control, Cognitive Complexity 1*, 7*, 8*, 10*, 12*, 13*, 14, 15*, 18, 27, 29* 11 11–44

Worked example with real numbers and the arithmetic shown

Consider a participant with the following raw response vector across items 1 to 30:

[3, 2, 3, 1, 2, 2, 3, 4, 2, 3, 1, 4, 3, 2, 2, 2, 2, 3, 1, 3, 2, 2, 1, 2, 3, 1, 2, 2, 3, 3]

Step 1: Invert 11 Reverse Items ($5 – x_i$)

  • Items with $x_i = 3$ invert to $2$: 1, 7, 10, 13, 20, 29, 30 ($5 – 3 = 2$).
  • Items with $x_i = 4$ invert to $1$: 8, 12 ($5 – 4 = 1$).
  • Items with $x_i = 2$ invert to $3$: 9, 15 ($5 – 2 = 3$).

Step 2: Subscale and Total Arithmetic

Attentional Impulsiveness: Items 5(2), 6(2), 9*(3), 11(1), 20*(2), 24(2), 26(1), 28(2):
$$S_{text{Att}} = 2 + 2 + 3 + 1 + 2 + 2 + 1 + 2 = 15$$

Motor Impulsiveness: Items 2(2), 3(3), 4(1), 16(2), 17(2), 19(1), 21(2), 22(2), 23(1), 25(3), 30*(2):
$$S_{text{Mot}} = 2 + 3 + 1 + 2 + 2 + 1 + 2 + 2 + 1 + 3 + 2 = 21$$

Nonplanning Impulsiveness: Items 1*(2), 7*(2), 8*(1), 10*(2), 12*(1), 13*(2), 14(2), 15*(3), 18(3), 27(2), 29*(2):
$$S_{text{Non}} = 2 + 2 + 1 + 2 + 1 + 2 + 2 + 3 + 3 + 2 + 2 = 22$$

Total Score: $S_{text{Total}} = 15 + 21 + 22 = 58$ (within normative adult boundaries).

Interpretation

Interpreting BIS-11 scores involves contextualizing values against community distributions. Normative data from Stanford et al. (2009) ($N = 1,577$) report a healthy adult mean of $M = 62.3$ ($SD = 10.3$). Scores are evaluated across three empirical tiers:

Total Score Classification Psychometric Interpretation
30 to 51 Low / Overcontrolled High behavioral restraint or potential social desirability bias.
52 to 71 Within Normal Limits Typical community baseline balancing spontaneous behavior with planning.
72 to 120 Highly Impulsive Elevated trait impulsivity (~1 SD or more above normative population mean).

Subscale norms from Reise et al. (2013) ($N = 691$) establish adult baselines: Attentional ($M = 14.4$, $SD = 3.5$), Motor ($M = 21.5$, $SD = 4.0$), and Nonplanning ($M = 23.3$, $SD = 4.6$). In psychometric studies, researchers confirm convergent and discriminant validity across related constructs, noting that self-reported trait scores correlate moderately with sensation seeking but diverge from behavioral tasks. Analysts must also inspect distributions for floor and ceiling effects when examining student or clinical groups.

Assumptions and common mistakes

Accurate administration and scoring of the BIS-11 require avoiding several frequent errors:

  • Omitting Reverse Coding: Summing raw items without inverting the 11 reverse items completely invalidates subscale and composite scores.
  • Using 0–3 Coding: Survey software often defaults to 0-indexed values. The BIS-11 requires 1-to-4 scaling. If 0–3 data is collected, add 1 to all raw responses.
  • Conflating Self-Reports with Behavioral Tasks: Questionnaires capture longitudinal tendencies, whereas computerized tasks measure acute state inhibition ($r approx .10text{–}.25$).
  • Treating the Scale as a Diagnostic Criterion: The BIS-11 measures dimensional traits. Elevated scores indicate trait vulnerability, not an automatic clinical diagnosis.
  • Improper Missing Data Imputation: Never code missing items as zero. If a participant skips $le 20%$ of items on a subscale, prorate using the valid item mean. Exclude records missing more than 20%.
  • Ignoring Cross-Cultural Construct Validity: When deploying translations, verify factorial construct validity to confirm consistent psychometric structure.

How to report it (APA example)

When reporting BIS-11 results in manuscripts following APA 7th edition guidelines, present sample sizes, score ranges, means, standard deviations, and internal consistency reliability coefficients.

Reporting Checklist

  • Cite Patton, Stanford, and Barratt (1995) as primary authority.
  • State response scale (1–4) and range (30–120).
  • Report mean ($M$) and standard deviation ($SD$) for total and subscale scores.
  • Report internal consistency via Cronbach’s alpha ($alpha$).
  • Note established test-retest reliability ($r = .83$ over 1 month).

APA Reporting Narrative Excerpt

“Trait impulsivity was measured with the 30-item Barratt Impulsiveness Scale (BIS-11; Patton et al., 1995). Items were rated on a 4-point scale (1 = Rarely/Never to 4 = Almost Always/Always) and summed after reverse-scoring 11 items. Scores yielded a total composite score (range: 30–120) and three subscales: Attentional (range: 8–32), Motor (range: 11–44), and Nonplanning Impulsiveness (range: 11–44). In our sample ($N = 210$), internal consistency was strong for the total score ($alpha = .83$) and adequate for subscales (Attentional $alpha = .74$, Motor $alpha = .77$, Nonplanning $alpha = .80$). Mean scores were $M = 63.85$ ($SD = 10.12$) for the total scale, $M = 14.80$ ($SD = 3.45$) for Attentional, $M = 22.10$ ($SD = 4.15$) for Motor, and $M = 26.95$ ($SD = 4.70$) for Nonplanning Impulsiveness.”

How to calculate it in Excel, R or Python

Automated calculation scripts eliminate manual transcription and reverse-scoring errors. Below are verified implementations for Excel, R, and Python.

1. Excel Formulas

With items 1–30 in columns A2:AD2:

Attentional (AE2): =E2+F2+(5-I2)+K2+(5-T2)+X2+Z2+AB2
Motor (AF2):       =B2+C2+D2+P2+Q2+S2+U2+V2+W2+Y2+(5-AD2)
Nonplanning (AG2): =(5-A2)+(5-G2)+(5-H2)+(5-J2)+(5-L2)+(5-M2)+N2+(5-O2)+R2+AA2+(5-AC2)
Total Score (AH2): =AE2+AF2+AG2

2. R Function

score_bis11 <- function(df) {
  rev <- c("item_1","item_7","item_8","item_9","item_10","item_12","item_13","item_15","item_20","item_29","item_30")
  rec <- df; rec[rev] <- 5 - rec[rev]
  df$bis11_att <- rowSums(rec[c("item_5","item_6","item_9","item_11","item_20","item_24","item_26","item_28")])
  df$bis11_mot <- rowSums(rec[c("item_2","item_3","item_4","item_16","item_17","item_19","item_21","item_22","item_23","item_25","item_30")])
  df$bis11_non <- rowSums(rec[c("item_1","item_7","item_8","item_10","item_12","item_13","item_14","item_15","item_18","item_27","item_29")])
  df$bis11_tot <- df$bis11_att + df$bis11_mot + df$bis11_non
  return(df)
}

3. Python Function

def score_bis11(resp: dict) -> dict:
    rev = {1, 7, 8, 9, 10, 12, 13, 15, 20, 29, 30}
    rec = {i: (5 - resp[i] if i in rev else resp[i]) for i in range(1, 31)}
    att = sum(rec[i] for i in [5, 6, 9, 11, 20, 24, 26, 28])
    mot = sum(rec[i] for i in [2, 3, 4, 16, 17, 19, 21, 22, 23, 25, 30])
    non = sum(rec[i] for i in [1, 7, 8, 10, 12, 13, 14, 15, 18, 27, 29])
    return {"attentional": att, "motor": mot, "nonplanning": non, "total": att + mot + non}

FAQ

What is the difference between BIS-11 first-order and second-order factors?

Principal components analysis identifies six first-order subfactors (Attention, Cognitive Instability, Motor, Perseverance, Self-Control, Cognitive Complexity). These collapse into three robust second-order dimensions: Attentional, Motor, and Nonplanning Impulsiveness, which are standardly reported in empirical research.

Which items are reverse-scored on the Barratt Impulsiveness Scale?

Eleven items are reverse-scored: 1, 7, 8, 9, 10, 12, 13, 15, 20, 29, and 30. Each reverse item is recoded via $5 – x$ (so 1 becomes 4, 2 becomes 3, 3 becomes 2, and 4 becomes 1) prior to calculating factor sums.

What total score is considered high on the BIS-11?

In community cohorts, scores of 72 or higher reflect high trait impulsivity (~1 SD above the healthy adult mean of 62.3). Scores between 52 and 71 represent normal limits, while scores below 52 indicate unusually high behavioral inhibition.

Is the BIS-11 free to use or in the public domain?

The BIS-11 is freely available for non-commercial academic research and clinical screening with citation of Patton et al. (1995). Commercial implementations require formal clearance from copyright holders via the International Society for Research on Impulsivity (ISRI).

Can the Barratt Impulsiveness Scale diagnose psychiatric disorders?

No. The BIS-11 measures dimensional trait impulsivity. While elevated scores are common in ADHD, bipolar disorder, and substance use disorders, formal clinical diagnosis requires clinical diagnostic interviews and functional impairment assessments.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Barratt Impulsiveness Scale: Scoring and Norms

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →