Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop bid tabulation supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Bid Tabulation: What It Records and How to Use It

What a bid tabulation (abstract of offers) records at bid opening, how it differs for sealed bids versus proposals, and a record-keeping checklist.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

A bid tabulation is the written record of the bids received for a purchase, laid out so they can be compared and kept on file. In US federal sealed bidding the formal version is called the abstract of offers: it is completed and certified as accurate by the bid opening officer as soon after bid opening as practicable (FAR 14.403, checked 2026-11-03). This guide is for lab, clinic and grants staff who need to understand what the record must show and what a tabulation does and does not decide. It is general procurement information, not legal advice, and it applies to US public and federally funded buying; your institution’s own policy governs.

Short answer

A bid tabulation lists each bidder and what each offered, side by side, at or right after bid opening. In sealed bidding it supports the award to the lowest responsive bid from a responsible bidder. When you buy by competitive proposal instead, a price tabulation alone is not the selection record, because written evaluation procedures and a documented rationale are also required.

What a bid tabulation is, and how it relates to a bid abstract

The two names are used for the same kind of record. “Abstract of offers” is the term in the Federal Acquisition Regulation, which names Standard Form 1409 (and Optional Form 1419 for construction) or an automated equivalent. Many state and local rules and agency manuals say “bid tabulation” or “bid abstract”. A secondary glossary definition describes it as the recording of bids and bidding data submitted in response to a solicitation, kept for comparison, analysis and record keeping (Law Insider, a contract-clause database).

The record is not the same thing as the invitation for bids, the bids themselves, or the award decision. It is the summary that sits between them.

What gets recorded at bid opening

The federal rules are specific about a few points, and they give a useful skeleton for any buyer:

  • Who completes it and when. The bid opening officer completes and certifies it as to accuracy, as soon after opening as practicable (FAR 14.403(a)).
  • How much detail. When there are too many items to record every bid in full, entries for individual bids may be limited to item numbers and bid prices. Extra columns and continuation sheets may be used for other information the contracting activity needs.
  • Cancelled solicitations. If an invitation for bids is cancelled before the opening time, that fact is recorded together with the number of bids invited and the number received (FAR 14.403(d)).
  • Public inspection. Abstracts for unclassified acquisitions are available for public inspection, and they must not include notes on failure to meet responsibility standards or apparent collusion that are exempt from disclosure (FAR 14.403(b)).

Sealed bids are opened at the time and place set in the invitation, and local governments must open them publicly (2 CFR 200.320(b)(1)(ii)(C), checked 2026-11-03).

Sealed bids versus proposals: when the tabulation decides the award

Method What the rule says What it means for the record
Sealed bids A firm-fixed-price contract is awarded in writing to the lowest responsive bid and responsible bidder. Discounts, transportation cost and life-cycle cost count only when the invitation says so (2 CFR 200.320(b)(1)(ii)(D)). The tabulation is the working record of the price comparison. Whether a bid is responsive and the bidder responsible still has to be recorded.
Competitive proposals The buyer must have written procedures for technical evaluations and selections, and awards to the responsible offeror whose proposal is most advantageous considering price and other factors (2 CFR 200.320(b)(2)(ii)-(iii)). A price tabulation shows only one factor. The evaluation scores and reasons are part of the record too.

For how a proposal solicitation is built, see the guide to a request for proposal for lab procurement and the worked example of autoclave RFP requirements.

Template and comparison-matrix variants

None of the rules cited here prescribes a column layout for a “bid tabulation template”, “bid comparison template” or “vendor comparison matrix”. The checklist below is an editorial interpretation: it takes the elements the rules say must be recorded and turns them into columns and rows. It is not a standard.

Bid tabulation template

Rows are bidders, with columns for bid price (or item prices), the time the bid was received, and any item numbers covered. Add a line for the invitation number, opening date and the name of the person who certified the sheet, mirroring the federal abstract.

Bid comparison template and vendor comparison matrix

Use these when the evaluation goes beyond price. Put the evaluation factors named in the solicitation as rows and each offeror as a column, with the stated relative importance of each factor. Keep the factors identical to those in the solicitation: 2 CFR 200.320(b)(2)(i) requires the evaluation factors and their relative importance to be identified in the request for proposals. For choosing those factors, see vendor selection criteria.

Where it matters for lab and clinic equipment purchases

Grant-funded purchases of instruments and supplies fall under the procurement standards in 2 CFR 200. Two of them bear directly on the file you keep:

  • Records must be sufficient to detail the history of each procurement, including the rationale for the procurement method, contract type, contractor selection or rejection, and the basis for the contract price (2 CFR 200.318(i)).
  • Awards go only to responsible contractors with the ability to perform, considering integrity, public policy compliance, past performance and financial and technical resources, among other factors (2 CFR 200.318(h)).

Record-keeping checklist (editorial, built from those two rules)

  1. Before opening: the solicitation, the solicitation and the method chosen with the reason for it.
  2. At opening: the tabulation itself, certified, with the count of bids invited and received.
  3. After opening: the responsiveness and responsibility determination for the lowest bidder, and the reason any bidder was rejected.
  4. At award: the award document and the basis for the price. If only one source was possible, see sole source justification for equipment purchases.

The related purchase requisition versus purchase order comparison covers the internal paperwork that follows the award.

Common misunderstandings

  • “The lowest number wins.” In sealed bidding the award goes to the lowest responsive bid from a responsible bidder; a lower price from a non-responsive or non-responsible bidder does not qualify.
  • “A tabulation is the selection record.” For proposals, the written evaluation and selection rationale is also required.
  • “It is private.” Federal abstracts for unclassified acquisitions are open to public inspection, minus exempt notes. Check your own state or institutional rule.
  • “There is one official template.” The federal forms are for federal agencies; the rules let the buyer add columns it needs.

FAQ

Is there a standard bid tabulation template?

For federal sealed bidding the forms are SF 1409 and OF 1419 with continuation sheets (FAR 14.403). Outside that, none of the rules cited here prescribes a layout, so institutions build their own from the elements above.

What is the difference between a bid comparison template and a vendor comparison matrix?

Editorially, a bid comparison template compares submitted bids, usually on price, while a vendor comparison matrix scores vendors against evaluation factors. When the award is by proposal, the matrix must use the factors stated in the solicitation.

Does a bid tabulation apply to proposals?

Tabulating prices can help, but proposals are awarded on the most advantageous offer considering price and other factors, using written evaluation procedures (2 CFR 200.320(b)(2)).

Sources

All sources checked 2026-11-03.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Bid Tabulation: What It Records and How to Use It

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →