Skip to main content
v2026.11,986 entries · CC-BY 4.0

Biomechanics and Modeling in Mechanobiology: Journal Profile

Guide to Biomechanics and Modeling in Mechanobiology: Springer Nature scope, impact factor, MEDLINE indexing, hybrid APC fees, and author submission steps.

Written and maintained by CASRAI Editorial Board

Published

On this page

Biomechanics and Modeling in Mechanobiology (BMMB) is a peer-reviewed bimonthly scientific journal published by Springer Nature that covers theoretical, computational, and experimental investigations at the intersection of biological mechanics, cellular mechanotransduction, and multiscale tissue modeling. Established in 2002 and indexed across MEDLINE, PubMed, and Scopus, the journal operates under a hybrid publishing model that allows authors to choose between traditional subscription publication without author-facing charges or immediate open access supported by an article processing charge.

What is Biomechanics and Modeling in Mechanobiology?

Biomechanics and Modeling in Mechanobiology is an international academic journal dedicated to publishing integrative research that bridges mechanics, biology, and computational simulation. While classical biomechanics investigates the structural responses of biological tissues and organs under external loads, mechanobiology investigates how physical forces activate molecular pathways, regulate cell differentiation, direct extracellular matrix remodeling, and drive pathological tissue changes. The journal was established in June 2002 to create a specialized venue where mathematical and engineering formulations could be systematically coupled with biological experiments.

The foundational premise of the journal rests on multiscale modeling. Biological systems respond to physical forces across vastly different dimensional scales: sub-cellular protein complexes convert nanonewton tensions into chemical signals, microscopic cellular populations migrate along matrix stiffness gradients, and macroscopic cardiovascular and musculoskeletal organs undergo continuous physiological remodeling in response to mechanical stress. Rather than treating solid mechanics, fluid dynamics, and cell biology in isolation, papers published in the journal integrate these domains into predictive computational frameworks grounded in empirical data.

Authors researching the discipline of biomechanics frequently consult the journal when formulating continuum constitutive equations or multiscale finite element models. By requiring that computational hypotheses be substantiated by rigorous experimental validation or calibrated against physiological measurements, the journal prevents purely theoretical models from diverging from biological realities.

Who runs the journal and what it covers

The journal is published by Springer Nature (under the historic imprint Springer-Verlag Berlin Heidelberg) and releases six issues per annual volume on a bimonthly schedule. Editorial leadership is directed by two Editors-in-Chief: Gerhard A. Holzapfel of Graz University of Technology, renowned for constitutive modeling of soft biological tissues and vascular biomechanics, and David Nordsletten of the University of Michigan and King’s College London, an authority in cardiac mechanics and coupled electromechanical simulations. Founding and former Editors-in-Chief include Peter Hunter of the Auckland Bioengineering Institute, Larry Taber of Washington University in St. Louis, and Jay D. Humphrey of Yale University.

The editorial scope covers four primary thematic pillars:

  • Cellular and Subcellular Mechanobiology: Studies investigating mechanotransduction mechanisms, cell-matrix interactions, cytoskeletal tension generation, nuclear deformability, and the biochemical signaling cascades triggered by fluid shear stress or substrate stretch.
  • Tissue Growth, Adaptation, and Remodeling: Theoretical and numerical formulations of volumetric tissue growth, stress-modulated remodeling, collagen turnover, vascular wall adaptation under hypertensive flow, and bone remodeling governed by strain energy density.
  • Multiscale and Coupled Physics Formulations: Continuum mechanics models linking molecular dynamics or agent-based cellular automata to macroscale finite element representations, including fluid-structure interaction in heart valves, aortic aneurysms, and respiratory airways.
  • Diagnostic, Surgical, and Therapeutic Engineering: Patient-specific computational biomechanics, simulation of orthopedic implant osseointegration, biomechanical assessments of surgical interventions, and computational oncology modeling interstitial fluid pressure in tumors.

Manuscripts that address purely empirical kinematics, standard gait analysis without mechanobiological modeling, or material testing lacking biological integration fall outside the journal’s core mission and are typically redirected to general biomechanics or materials periodicals.

Journal metrics: Impact factor, Scopus ranking, and citation profile

Bibliometric performance indicators place Biomechanics and Modeling in Mechanobiology among the leading technical journals in computational bioengineering. In Clarivate Journal Citation Reports, the journal maintains a Journal Impact Factor of approximately 3.5. In Elsevier Scopus, the publication maintains a consistent position in Quartile 2 (Q2) across three primary indexing categories: Biomedical Engineering, Modeling and Simulation, and Mechanical Engineering.

According to comprehensive bibliographic cataloging from OpenAlex, the journal contains over 2,200 documented academic works that have accumulated more than 76,000 recorded citations, yielding an h-index of 114 and a two-year mean citedness rate of 3.71. Unlike clinical medical journals where citations peak within eighteen months and decay rapidly, computational biomechanics papers exhibit extended citation half-lives. Landmark constitutive formulations and multiscale algorithms published in the journal routinely receive steady citations five to ten years after initial publication as research teams incorporate them into baseline simulation codes.

Bibliographic indexing is fully verified through official cataloging bodies. The United States National Library of Medicine (NLM ID 101135325) indexes the publication under the official title abbreviation Biomech Model Mechanobiol, with continuous MEDLINE and Index Medicus indexing starting from Volume 1, Issue 1 in June 2002. It is indexed in Science Citation Index Expanded, PubMed, Scopus, and major engineering indexing systems.

Publishing models, open access options, and author costs

Biomechanics and Modeling in Mechanobiology operates under a hybrid journal model through the Springer Open Choice framework. This dual-track architecture provides authors with two distinct avenues for publishing their accepted manuscripts, accommodating institutional budgets, grant conditions, and national open science mandates.

Under the traditional subscription track, publication is entirely free of author-facing page charges or color reproduction fees. Authors transfer copyright or grant an exclusive commercial license to Springer Nature, and the published version of record is accessible to university libraries, research institutes, and individual subscribers. Authors retain the right to conduct green open access self-archiving by depositing their peer-reviewed Accepted Manuscript (AM) into an institutional repository or non-commercial subject repository after a mandatory 12-month post-publication embargo.

Alternatively, authors may elect the Gold Open Access track by paying an article processing charge (APC). For this title, Springer Nature sets the APC at $4,190 USD (equivalent to 3,190 EUR or 2,790 GBP, excluding applicable local taxes). Upon APC payment, the final article is published under a Creative Commons Attribution 4.0 International (CC BY 4.0) license, making it immediately accessible worldwide to all readers without paywalls. Many authors avoid out-of-pocket costs because Springer Nature maintains institutional transformative agreements (read-and-publish deals) with university consortia across North America, the United Kingdom, and Europe, allowing APCs to be covered centrally by university libraries.

How to prepare and submit manuscripts through Editorial Manager

Submissions to the journal are processed electronically through the Springer Nature Editorial Manager platform. Prospective authors must prepare their manuscripts according to strict formatting and computational reproducibility standards before initiating submission. The required workflow follows six sequential stages:

  1. Account Registration and ORCID Linking: The corresponding author logs into the journal portal on Editorial Manager using authenticated credentials and connects their persistent ORCID digital identifier. Co-authors should also supply verified ORCID iDs to ensure proper bibliographic attribution upon publication.
  2. Article Type and Category Designation: Authors select the appropriate manuscript classification, such as Original Paper, Review Article, or Special Issue contribution. The title page must clearly state all author affiliations, corresponding author contact details, and a structured abstract summarizing the background, methods, results, and mechanobiological conclusions.
  3. Computational Model Verification and Documentation: Manuscripts containing numerical simulations must provide exhaustive details of the constitutive formulations, material parameter identification procedures, boundary conditions, and spatial mesh sensitivity analyses. In accordance with established computational standards, authors should clearly document validation benchmarks against experimental measurements or analytical solutions.
  4. CRediT Contributor Roles and Ethical Disclosures: Authors must supply a CRediT statement detailing specific contributor responsibilities (e.g., conceptualization, formal analysis, software, investigation, and writing). For investigations involving human tissues, donor data, or animal models, formal statements confirming institutional ethics committee approval and informed consent must appear on the title page.
  5. Data Availability Statement and Code Sharing: In compliance with Springer Nature research data policies, every submission must include a formal data availability statement. Authors must specify whether simulation models, finite element meshes, raw biological testing data, and custom analysis scripts are deposited in public repositories such as Zenodo, Dryad, or GitHub, or made available upon reasonable request.
  6. Peer Review and Revision Management: The manuscript undergoes single-blind peer review, wherein two to four independent expert reviewers evaluate biological validity and mathematical rigor. If revisions are requested, authors must prepare a detailed point-by-point rebuttal alongside a tracked-changes manuscript file before final editorial acceptance.

Strengths and limitations

Evaluating Biomechanics and Modeling in Mechanobiology requires examining both its unique editorial strengths and its operational constraints for prospective academic authors.

Key Strengths:

  • Rigorous Mathematical and Biophysical Scrutiny: Unlike generalized bioengineering journals that may lack deep expertise in continuum mechanics, the peer review pool for this journal is exceptionally qualified to critique complex constitutive laws, tensor formulations, and numerical convergence schemes.
  • Strong Historical Legacy and Archival Permanence: Established in 2002, the journal holds high standing in the mechanobiology community, ensuring that published models are read, tested, and cited by specialist researchers across biomechanical engineering.
  • Comprehensive Cataloging and Indexing: Continuous MEDLINE, PubMed, and Web of Science indexing ensures that published articles are discoverable across both clinical and engineering databases.
  • Flexible Publication Economics: The availability of an entirely free subscription publishing option prevents financial limitations from barring researchers with modest funding from disseminating their work.

Key Limitations:

  • Lengthy Review Timelines: Because manuscripts often require thorough checking of complex mathematical models and experimental setups, the peer review turnaround can take several months, which is slower than rapid-turnaround open access megajournals.
  • Substantial Article Processing Charges: For authors who are mandated by funders to publish open access but lack institutional transformative agreements, the $4,190 APC represents a significant financial barrier.
  • Strict Embargo on Green Open Access: The 12-month post-publication embargo for subscription articles delays public repository dissemination of accepted manuscripts relative to journals with six-month embargoes.
  • Specialized Audience Scope: Highly clinical, purely empirical, or non-modeling studies will find limited readership and face immediate desk rejection, narrowing the prospective author pool to multidisciplinary engineering groups.

Alternatives to Biomechanics and Modeling in Mechanobiology

Researchers preparing manuscripts at the intersection of mechanics and biology can evaluate several prominent alternative journals, each tailored to distinct methodologies and audiences. The comparative table below outlines how leading titles contrast with Biomechanics and Modeling in Mechanobiology across editorial scope, primary methodologies, publisher, and business models.

Journal Title Publisher Primary Disciplinary Focus Typical Methodologies Publishing Model
Biomechanics and Modeling in Mechanobiology Springer Nature Multiscale cellular and tissue mechanotransduction, adaptive growth and remodeling Continuum mechanics, coupled FSI, multiscale finite element analysis, in vitro cellular mechanics Hybrid (Open Choice, $4,190 APC or $0 subscription)
Journal of Biomechanics Elsevier Musculoskeletal biomechanics, human movement analysis, orthopedic and sports mechanics Kinematics, motion capture, electromyography, in vivo force plates, macroscopic finite element analysis Hybrid ($3,990 APC or $0 subscription)
Computer Methods in Biomechanics and Biomedical Engineering Taylor & Francis Numerical simulations, computational algorithms, and biomedical device modeling Finite element method, computational fluid dynamics, surrogate modeling, medical image processing Hybrid (Open Select, $3,590 APC or $0 subscription)
Journal of the Mechanical Behavior of Biomedical Materials Elsevier Mechanical testing and structural integrity of synthetic and natural biomaterials Tensile testing, fatigue and fracture analysis, nanoindentation, tribology, degradation modeling Hybrid ($3,890 APC or $0 subscription)
Annals of Biomedical Engineering Springer Nature / BMES Broad bioengineering applications including instrumentation, drug delivery, and cardiovascular systems In vivo experimental models, device prototypes, computational modeling, clinical translations Hybrid (Open Choice, $4,190 APC or $0 subscription)

When selecting among these publications, authors should assess the relative balance of mathematics and biology in their study. Manuscripts focusing primarily on patient kinematic outcomes or gait parameters belong in the Journal of Biomechanics. Papers emphasizing algorithmic improvements in software solvers belong in Computer Methods in Biomechanics and Biomedical Engineering. Investigations centered on material durability and fatigue testing belong in the Journal of the Mechanical Behavior of Biomedical Materials. Studies that couple cellular mechanotransduction, active tissue growth, or multiscale biological mechanics with constitutive theory find their ideal home in Biomechanics and Modeling in Mechanobiology.

Frequently asked questions

What is the scope of Biomechanics and Modeling in Mechanobiology?

The journal publishes original theoretical, computational, and experimental research studies focused on mechanical and biological phenomena across all levels of biological organization. This scope encompasses cellular mechanobiology, tissue growth and remodeling, fluid-structure interactions in cardiovascular and respiratory systems, diagnostic or therapeutic modeling, and non-linear continuum mechanics applied to living tissues.

Who publishes Biomechanics and Modeling in Mechanobiology?

The journal is published bimonthly by Springer Nature under the historical imprint Springer-Verlag Berlin Heidelberg. It releases six issues per annual volume and has been published continuously since June 2002.

What is the impact factor of Biomechanics and Modeling in Mechanobiology?

In the Clarivate Journal Citation Reports, Biomechanics and Modeling in Mechanobiology maintains a Journal Impact Factor of approximately 3.5, placing it consistently in Quartile 2 (Q2) across the categories of Biomedical Engineering, Modeling and Simulation, and Mechanical Engineering.

Is Biomechanics and Modeling in Mechanobiology an open-access journal?

The journal operates as a hybrid publication rather than a pure open access journal. Authors may publish free of charge under the traditional subscription model, or choose immediate Gold Open Access by paying an article processing charge of $4,190 USD under the Springer Open Choice program.

What is the difference between biomechanics and mechanobiology?

Biomechanics applies classical mechanical principles to study the forces acting on and produced by biological structures. Mechanobiology specifically investigates the biological response to physical forces, focusing on how cells sense mechanical stimuli (mechanotransduction) and convert them into biochemical signals that alter gene expression, cellular differentiation, and tissue architecture.

How do authors submit manuscripts to the journal?

Submissions are managed online through the Springer Nature Editorial Manager system. Authors log in with an ORCID-linked account, upload the manuscript, figures, and supplementary materials, and provide mandatory data availability statements, ethical declarations, and CRediT contributor role assignments.

Sources

Data: Biomechanics and Mechanobiology Journal Comparison Matrix

Comparative specifications, indexing coverage, bibliometric indicators, and publication fees across major peer-reviewed biomechanics and mechanobiology journals, compiled from NLM Catalog, publisher policies, and OpenAlex records in November 2026.

Period covered: 2002/2026. Coverage: Global.

Biomechanics and Mechanobiology Journal Comparison Matrix
Journal TitlePublisherLaunch YearPublication FrequencyPeer Review ModelIndexing StatusOpen Access ModelGold OA APC (USD)
Biomechanics and Modeling in MechanobiologySpringer Nature2002Bimonthly (6 issues/year)Single-blindMEDLINE, PubMed, Scopus, SCIEHybrid (Open Choice)4190
Journal of BiomechanicsElsevier1968Monthly (16 issues/year)Single-blindMEDLINE, PubMed, Scopus, SCIEHybrid3990
Computer Methods in Biomechanics and Biomedical EngineeringTaylor & Francis1997Monthly (16-18 issues/year)Single-blindMEDLINE, PubMed, Scopus, SCIEHybrid (Open Select)3590
Journal of the Mechanical Behavior of Biomedical MaterialsElsevier2008Monthly (12 issues/year)Single-blindMEDLINE, PubMed, Scopus, SCIEHybrid3890
Annals of Biomedical EngineeringSpringer Nature / BMES1972Monthly (12 issues/year)Single-blindMEDLINE, PubMed, Scopus, SCIEHybrid (Open Choice)4190

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Biomechanics and Modeling in Mechanobiology: Journal Profile

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →