Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop bone harvester supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Bone Harvester: What It Is and How Types Differ

What a bone harvester is, how suction and scraper designs differ, and which GUDID record fields matter for sterile single-use supply.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

General product information for laboratory, clinic and supply staff. It is not medical advice and does not describe how any procedure is performed.

Short answer

A bone harvester is a surgical instrument, supplied sterile and single-use in the examples below, that cuts or scrapes a patient’s own bone and collects it for use as graft material. Two documented designs differ in what they collect: a suction-assisted instrument that gathers cancellous (spongy) bone and marrow, and a hand-held scraper that gathers cortical (outer) bone.

Definition and scope

“Bone harvester” and “bone graft harvester” name the same product family: instruments that remove autologous bone, meaning bone from the same patient who receives the graft, so that it can be placed at a surgical site. This page covers the harvesting instrument and the collection filter that some designs use. Syringes and funnels, which people sometimes search for alongside harvesters, are separate products and are outside this page.

The US National Library of Medicine’s AccessGUDID database holds the manufacturer-submitted record for one such device, the Avitus Bone Harvester from Avitus Orthopaedics, Inc. Zimmer Biomet, which markets the Avitus line, describes it as a device for “harvesting autologous bone and marrow to be delivered to an orthopaedic surgical site”.

How harvesters are described in practice

Suction-assisted collection of cancellous bone

The GUDID description of the Avitus 8 mm model calls it “a manual surgical instrument that cuts cancellous bone by manual actuation of the 8mm cutting tip”. A barbed nozzle on the cap connects to standard suction tubing and a vacuum source, and the suction draws bone and marrow from the cutting tip into a reservoir inside the handle. The cap contains a filter that works as a physical sieve, keeping bone particles in the handle rather than letting them pass into the suction system. Zimmer Biomet calls this “suction curettage” and lists 6 mm and 8 mm tips; the 8 mm instrument includes a marrow separation insert.

Hand-held scraping of cortical bone

BioHorizons describes its Bone Scraper as a “cortical bone graft harvester” that “provides a simple method for collecting autologous cortical bone for use in oral surgery”. Its listed features are a stainless steel cutting blade, a blade that rotates 360 degrees to expose four sharp edges, and a sterile, single-use, disposable design.

Collection filters as a separate product term

The Global Medical Device Nomenclature (GMDN) lists “Bone graft harvesting filter” (term 47624) as its own term: a sterile receptacle that collects morselized bone and marrow, placed with connection tubing between the bone harvesting device and a suction system. The GUDID record for the Avitus harvester carries this term, which shows that one catalogue item can be coded as a filter even though the product is sold as a harvester.

Types compared

Feature Suction-assisted harvester (Avitus) Hand-held scraper (BioHorizons Bone Scraper)
Bone type collected Cancellous bone and bone marrow Cortical bone
Stated field of use Orthopaedic surgical site Oral surgery
Tip or blade 6 mm and 8 mm tips Stainless steel blade, four edges
Sterile and single-use Yes (GUDID: packaged sterile, single use) Yes (manufacturer: sterile, single use, disposable)

Cancellous bone is the spongy, marrow-containing interior of bone, and cortical bone is the dense outer layer. Each manufacturer’s description states which bone type its instrument is made to collect.

What a GUDID record tells supply and lab staff

The Global Unique Device Identification Database (GUDID) is where manufacturers submit device identification records to the US Food and Drug Administration, and AccessGUDID is its public search. Read against the Avitus record, these are the fields that separate one harvester listing from another:

  • Device description: the manufacturer’s statement of what the instrument cuts and how it collects material (here, cancellous bone, with a filter in the cap).
  • Single use: “For Single-Use: Yes”.
  • Sterile status: “Device Packaged as Sterile: Yes” and “Requires Sterilization Prior to Use: No”.
  • Prescription use: listed as Rx, not over the counter.
  • Latex labeling: the record states it is not required to be labeled as containing natural rubber latex.
  • Product code and premarket submission: product code KNW (named “Instrument, Biopsy”) and premarket submission K152474.
  • GMDN terms: 47624 (Bone graft harvesting filter) and 47022 (Neurosurgical curette, single-use).
  • MRI safety: the record states that the labeling contains no MRI safety information.

The product code and GMDN term names are regulatory and nomenclature categories. They do not always match the everyday name of the product, which is why the same device can appear under “harvester”, “filter” and “curette” in different places.

For background on the US framework behind these records, see CASRAI’s entries on the FDA and the Medical Device Amendments of 1976. Problems with a device in use are handled through Medical Device Reporting, and a neighbouring orthopaedic consumable is covered in orthopedic sutures.

Common misunderstandings

  • A harvester is not the graft. It is the instrument that collects the patient’s own bone; the graft is the collected tissue.
  • “Bone graft harvester” does not mean one design. The two manufacturer descriptions above collect different bone types in different fields of use.
  • A filter can be part of a harvester. The Avitus record carries a harvesting-filter term because the cap contains one.
  • Single-use and sterile-packed are separate flags. Both are recorded independently in GUDID.

FAQ

What is a bone harvester?

It is a surgical instrument, sterile and single-use in the examples described here, that cuts or scrapes bone from the patient and collects it for grafting; examples differ by whether they collect cancellous or cortical bone.

What is a bone graft harvester?

It is another name for the same product family. Manufacturer descriptions use “bone harvester” and “cortical bone graft harvester” for instruments that collect autologous bone.

Is a bone graft syringe or funnel a bone harvester?

No. A harvester cuts and collects bone with a cutting tip, blade or filter. Syringes and funnels are separate products, so this page does not treat them as harvesters.

Are bone harvesters reusable?

The two products described here are labeled sterile and single-use. Check each product’s own labeling, since reuse status is set by the manufacturer.

Sources

Date checked: 2026-10-31.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Bone Harvester: What It Is and How Types Differ

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →