Skip to main content
v2026.11,986 entries · CC-BY 4.0

Carbon Dioxide Removal: Methods and Net Accounting

Trace carbon dioxide removal from atmospheric uptake to durable storage, with a pathway comparison and an example of net removal accounting.

Written and maintained by CASRAI Editorial Board

Published

On this page

Carbon dioxide removal (CDR) deliberately takes CO₂ out of the atmosphere and stores it durably, producing a net removal after associated emissions are counted. For researchers, the central test is a connected evidence chain: atmospheric carbon, a demonstrated storage destination, lifecycle accounting and monitoring of the stored carbon.

Short answer

A carbon capture measurement alone does not establish carbon dioxide removal. The U.S. Department of Energy’s Carbon Dioxide Removal Frequently Asked Questions defines CDR through atmospheric removal and durable storage that together create negative emissions. A material can capture CO₂ successfully while the overall process falls short of that definition: the carbon may come from a fossil source, return rapidly to the atmosphere or require activities whose emissions outweigh the removal.

The practical distinction is between evidence about a component and evidence about the whole pathway. A sorbent experiment establishes something about capture; a storage study establishes something about carbon retention. A removal claim needs those findings connected. The pathway comparison in the data table below brings together DOE’s process descriptions and NOAA’s marine research perspective to show where each kind of evidence belongs.

Definition and scope

CDR includes biological and engineered approaches. DOE lists direct air capture with storage, soil carbon sequestration, biomass carbon removal and storage, enhanced mineralization, ocean-based approaches, and afforestation or reforestation. These methods share an intended atmospheric outcome, although their mechanisms and storage reservoirs differ. “Natural” and “technological” are therefore descriptions of approaches rather than alternative definitions of removal.

Fossil point-source carbon capture and storage has a different starting point. It captures CO₂ from a power plant or industrial process before that carbon enters the atmosphere. DOE distinguishes this emissions reduction from removing carbon already in the atmosphere. Geological storage can be part of either pathway, so the presence of an underground store does not identify the carbon’s origin.

Carbon utilization also needs qualification. DOE’s FAQ describes conversion into products that retain carbon for different periods. Atmospheric CO₂ converted into a fuel that is subsequently burned does not meet its durable-removal definition. A conversion pathway can contribute to CDR when its atmospheric carbon enters long-duration storage and the complete process produces negative emissions. A product label alone cannot establish those conditions.

For research organisations, this vocabulary keeps distinct activities separate in carbon accounting for research. Preventing an emission, removing atmospheric CO₂ and retaining that carbon are different contributions. DOE treats removal as a complement to deep emissions reductions and a way to address residual and legacy emissions, rather than a reason to delay reducing emissions.

How carbon dioxide removal works in practice

Capture and release in direct air capture

DOE’s Office of Science describes two broad direct air capture approaches: liquid solvents and solid sorbents. In solvent systems, air contacts chemicals that remove CO₂; heat and vacuum can release the captured gas and return the chemicals to use. Solid sorbent systems bind CO₂ on filter materials, then use heating and/or vacuum to release it as a concentrated stream.

That concentrated stream still needs a destination. DOE describes geological storage and conversion into products as possible routes. The word “capture” covers separation from air, while “capture with storage” connects that separation to carbon retention. Comparing two capture materials without recording their release conditions would also leave out an important part of the cycle that DOE describes.

Energy belongs inside the evaluation. DOE notes that separating CO₂ from air requires substantial power because CO₂ is only a small fraction of the atmosphere. Its life cycle assessment guidance therefore addresses net CO₂-equivalent removal and other environmental impacts across lifecycle phases. High capture performance is an input to that assessment, rather than its conclusion.

Biological uptake and mineral reactions

Biomass pathways use plants or algae to take up atmospheric CO₂, then retain the carbon underground or in long-lived products. DOE identifies bioenergy with carbon capture and storage, or BECCS, as one example: biomass conversion produces energy and a CO₂ stream that is captured and stored. The atmospheric origin comes through the biomass. DOE explicitly distinguishes this from capturing carbon released by burning fossil-derived plastics in a waste stream.

Enhanced mineralization accelerates reactions involving CO₂ and alkaline materials. DOE describes routes involving underground formations, extracted and processed minerals, and minerals distributed across land or coastal areas. These settings have different process boundaries. A reaction result from one setting should be described within that setting, rather than presented as proof of an entire mineralization pathway’s net atmospheric outcome.

Soils and forests

Soil carbon sequestration increases soil carbon through changes in land management. DOE describes plant photosynthesis as the atmospheric uptake mechanism and soil organic matter as a storage form. Its FAQ gives cover crops, changes in tillage and compost application as examples of management approaches. These are pathway descriptions, not a guarantee that any particular intervention produces the same result everywhere.

Afforestation and reforestation increase carbon held in growing forests. DOE identifies durable, measurable and verifiable storage as a challenge for both forest and soil approaches. Fire and changes in land management can release previously retained carbon. Consequently, biological uptake and the persistence of the resulting stock need separate attention in a research account.

Marine carbon dioxide removal

Marine CDR encompasses approaches that work through ocean chemistry, biology or combinations of the two. NOAA explains that ocean alkalinity enhancement aims to change seawater chemistry so that the ocean can absorb more CO₂ from the atmosphere. NOAA’s ability to observe changes in alkalinity and ocean carbon content is relevant to evaluating this approach.

Kelp cultivation follows another route: kelp or other algae take up carbon from surface waters. NOAA discusses proposed storage in ocean sediments when kelp sinks, while also warning of possible displacement of phytoplankton productivity and other biogeochemical effects. Growing biomass and demonstrating its eventual storage are distinct research questions. NOAA also distinguishes local or seasonal acidification benefits from effects operating over longer timescales.

The underlying ocean carbon cycle and its measurement help explain why a change observed in seawater must be interpreted in its wider setting. NOAA reports substantial open questions about marine CDR readiness, effectiveness, scale and ecological effects. Those questions are properties of the research problem; a general marine label does not resolve them.

Where carbon dioxide removal matters for labs and research

CDR research links materials development, process evaluation, carbon-cycle science and environmental observation. DOE’s Office of Science describes foundational work on materials, chemicals, biochemical processes and geological processes involved in direct air capture. NOAA describes complementary roles for observing networks, modelling, ecosystem research and evaluation of impacts.

For a capture-materials laboratory, this means stating precisely which part of the evidence chain an experiment addresses. A result about binding and release concerns the separation stage. The research record can connect that result to its energy inputs and proposed storage route, while keeping unmeasured downstream outcomes distinct. This is an interpretation of DOE’s process and lifecycle descriptions, rather than a universal test protocol.

For environmental laboratories, NOAA’s marine work illustrates the importance of observations around an intervention. Ocean carbon and alkalinity measurements address changes in the carbon system; ecological observations address other consequences. Neither type of result substitutes for the other. A project can report a chemical response while separately investigating whether its wider environmental effects are acceptable.

For process researchers, the life cycle inventory connects measured inputs and outputs to lifecycle assessment. DOE’s DACS guidance treats LCA as a framework for net removal, environmental tradeoffs, sensitivity and uncertainty. It describes its best practices as complementary to ISO 14040 and ISO 14044, rather than replacements for those standards. A shared assessment framework helps make differences in boundaries and assumptions visible when comparing experiments or proposed systems.

Illustrative gross-to-net accounting example

Consider a fictional research scenario in which a pathway captures and durably stores 100 tonnes of atmospheric CO₂. Suppose the assessed activities within its defined boundary cause 20 tonnes of CO₂-equivalent emissions. A simplified calculation is 100 − 20 = 80 tonnes of net CO₂-equivalent removal. These numbers illustrate arithmetic only; they are not measurements from a facility or estimates of typical performance.

The example applies DOE’s distinction between a captured quantity and net lifecycle removal. It assumes that atmospheric origin and durable storage have already been established and that the stated emissions cover the chosen boundary. It does not establish additionality, quantify uncertainty or replace monitoring. If storage has not been demonstrated, the arithmetic cannot turn a capture result into verified removal.

A checklist for evaluating a removal claim

The following questions are an editorial synthesis of DOE’s definition, lifecycle guidance and monitoring discussion, together with NOAA’s marine research priorities. They help organise a research claim; they are not a crediting methodology or certification standard.

  • Atmospheric origin: Does the evidence identify where the carbon came from? DOE’s distinction between atmospheric removal and fossil point-source capture makes this the first classification question.
  • Storage destination: Where is the carbon retained, and what supports the stated duration? DOE distinguishes long-duration product storage from short-lived uses such as combusted fuels.
  • Net outcome: Does the lifecycle assessment evaluate associated emissions and environmental tradeoffs? DOE’s DACS guidance calls for consistent assessment alongside sensitivity and uncertainty analysis.
  • Monitoring evidence: How are removal and retention measured, reported and verified? DOE identifies robust lifecycle analysis and MRV as necessary across CDR approaches.
  • Wider effects: Which local environmental and community effects are assessed? NOAA highlights marine ecological questions, while DOE’s FAQ discusses land, energy and community implications.

A useful research report can answer these questions with different levels of maturity. It may establish a promising capture mechanism while storage monitoring remains a separate study. Keeping those conclusions explicit allows readers to assess what the work demonstrates without treating every component result as a completed removal claim.

Common misunderstandings

“All carbon capture is carbon removal.” Fossil point-source capture prevents some carbon from reaching the atmosphere. CDR removes atmospheric carbon. The two can share transport or storage infrastructure while serving different accounting roles, as DOE’s FAQ explains.

“Using captured CO₂ guarantees durable storage.” Conversion describes a process, not a guaranteed retention period. DOE distinguishes short-lived products from long-duration storage, and requires atmospheric origin and a net-negative overall process for conversion to form part of CDR.

“A natural pathway needs less verification.” DOE includes soil and forest approaches within CDR but identifies durability and verification challenges. An increase in a biological stock needs evidence about persistence and possible release, just as an engineered pathway needs evidence beyond its capture stage.

“Local ocean benefits prove long-term atmospheric removal.” NOAA describes potential short-term or local acidification benefits alongside unresolved storage and ecosystem questions. The scale, timing and mechanism of the observed effect matter. A local benefit and a durable atmospheric removal claim require conclusions matched to their respective evidence.

Sources

Data: Carbon dioxide removal pathways and evidence boundaries

Original qualitative crosswalk compiled from DOE pathway definitions, DOE direct air capture mechanisms and NOAA marine CDR research descriptions. It separates uptake, storage and the evidence boundary for each pathway; it does not rank performance or certify removal. Each row identifies its source by title.

Carbon dioxide removal pathways and evidence boundaries
PathwayUptake mechanismStorage destination or formEvidence boundarySource
Direct air capture with storageLiquid solvents or solid sorbents separate CO₂ from air.Separated CO₂ is directed to geological storage or durable products.Capture and release describe separation; durable storage and net lifecycle removal must also be established.DOE Direct Air Capture; DOE CDR FAQ, pp. 10–12
Biomass carbon removal and storagePlants or algae take up atmospheric CO₂.Underground storage or long-lived products.Biomass origin matters: DOE distinguishes atmospheric biomass carbon from fossil carbon in plastics.DOE CDR FAQ, pp. 10–11
Soil carbon sequestrationPhotosynthesis transfers atmospheric carbon into soil organic matter through changed land management.Increased soil carbon stocks.Durable, measurable and verifiable storage is a stated challenge.DOE CDR FAQ, p. 11
Afforestation and reforestationGrowing forests take up atmospheric CO₂.Carbon retained in forests.Durable, measurable and verifiable storage and large land requirements are stated challenges.DOE CDR FAQ, p. 11
Enhanced mineralizationAccelerated reactions between atmospheric CO₂ and alkaline materials.Solid carbonate minerals in the mineralization routes DOE describes.DOE distinguishes in situ, ex situ and surficial settings; the process setting defines the claim being assessed.DOE CDR FAQ, pp. 11–12
Marine alkalinity enhancementSeawater chemistry is changed to encourage greater uptake of atmospheric CO₂.Ocean carbon storage through altered carbonate chemistry.NOAA identifies ocean alkalinity and carbon observations as relevant to evaluating the approach.NOAA Ocean Acidification Program, Alkalinity Enhancement
Kelp cultivation for marine CDRKelp or algae take up CO₂ from surface waters.Proposed storage in ocean sediments after sinking.NOAA distinguishes local or seasonal benefits and identifies storage and biogeochemical impacts as research questions.NOAA Ocean Acidification Program, Kelp Farming & Afforestation

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about Carbon Dioxide Removal: Methods and Net Accounting

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →