Written and maintained by CASRAI Editorial Board
Published
On this page
CMMC Phase 2 is the second phase of the Department of Defense’s four-phase implementation framework for the Cybersecurity Maturity Model Certification program, established under 32 CFR § 170.3(e)(2) to mandate independent Level 2 third-party certification assessments by an accredited C3PAO as a condition of contract award for defense solicitations involving Controlled Unclassified Information.
Administered jointly by the Office of the Under Secretary of Defense for Acquisition and Sustainment (OUSD A&S), the DoD Chief Information Officer (DoD CIO), and the Cyber AB, Phase 2 represents the critical transition in defense contracting from voluntary self-assessments to mandatory, auditable third-party cybersecurity verification across the Defense Industrial Base (DIB). The data table below compares the implementation phases, assessment types, and operational requirements across the CMMC program lifecycle.
What it is and who runs it
CMMC Phase 2 is codified in federal regulation under Title 32 of the Code of Federal Regulations, Part 170 (32 CFR Part 170), specifically 32 CFR § 170.3(e)(2), alongside the Defense Federal Acquisition Regulation Supplement rule for clause DFARS 252.204-7021. In the Department of Defense’s structured rollout architecture, Phase 2 was designed to take effect exactly one calendar year following the effective date of the CMMC acquisition rule (Phase 1), marking the point where the Department begins including CMMC Level 2 Certification Assessment requirements in applicable defense solicitations and contracts as a non-negotiable condition of award.
A frequent point of confusion across contractors, university research administration offices, and IT service providers is the distinction between “CMMC Phase 2” and “CMMC Level 2”:
- CMMC Level 2 refers to the technical maturity tier within the CMMC model that safeguards Controlled Unclassified Information (CUI). It mandates full alignment with the 110 cybersecurity requirements established in National Institute of Standards and Technology (NIST) Special Publication 800-171 Revision 2 across 14 security domains.
- CMMC Phase 2 refers to the regulatory rollout milestone during which mandatory third-party audits for Level 2—known formally as Level 2 Certification Assessments conducted by a CMMC Third-Party Assessment Organization (C3PAO)—are contractually activated in DoD solicitations.
The program is governed through a tripartite administrative structure established by the Department of Defense:
- DoD Chief Information Officer (DoD CIO): Directs cybersecurity policy, oversees technical standards, manages the 32 CFR Part 170 rulemaking, and coordinates with NIST on baseline controls.
- Office of the Under Secretary of Defense for Acquisition and Sustainment (OUSD A&S): Oversees defense procurement policy, directs acquisition rulemaking under DFARS Part 204 and Part 252, and guides service-branch contracting commands on clause inclusion.
- The Cyber AB (Cybersecurity Assessor and Certification Project Accreditation Body): Operates as the independent, non-governmental accreditation body authorized by DoD under a bilateral memorandum of understanding to accredit C3PAOs, certify individual assessors (Certified CMMC Assessors and Certified CMMC Professionals), and maintain assessor marketplace standards.
- Defense Industrial Base Cybersecurity Assessment Center (DIBCAC): A specialized operational unit within the Defense Contract Management Agency (DCMA) that evaluates and authorizes C3PAOs, conducts Level 3 government assessments, and performs oversight audits of C3PAO assessment quality.
On July 13, 2026, the Department of Defense announced a major policy action regarding Phase 2: a temporary suspension of mandatory Phase 2 contract award conditions pending a 60-day review by the newly chartered CMMC Reform Task Force. While this administrative pause deferred the mandatory inclusion of third-party C3PAO audits in newly issued solicitations to address market bottlenecks and small business compliance burdens, the Department explicitly reaffirmed that foundational Phase 1 mandates remain in full legal force. All contractors handling CUI must continue maintaining active NIST SP 800-171 self-assessments, registering valid scores in the Supplier Performance Risk System (SPRS), and submitting annual executive affirmations of compliance.
Eligibility
Eligibility and mandatory applicability for CMMC Phase 2 are governed by the operational scope defined in 32 CFR § 170.3 and the contract prescriptions set forth in DFARS 204.7504 and DFARS 252.204-7021. The requirement applies broadly across the defense commercial base, subject to specific statutory boundaries:
Under official program rules as described on the official page on 2026-11-15, CMMC Phase 2 applies to any prime defense contractor or subcontractor at any tier that processes, stores, or transmits Controlled Unclassified Information on an unclassified contractor information system in support of a DoD contract where the solicitation incorporates DFARS 252.204-7021 specifying CMMC Level 2 (C3PAO). This includes commercial manufacturing suppliers, software development firms, logistics providers, engineering consultancies, and academic research institutions performing defense-funded applied research.
The regulatory framework establishes clear statutory exclusions and boundaries:
- Commercial Off-the-Shelf (COTS) Acquisitions: Solicitations and contracts solely for the procurement of commercially available off-the-shelf items, as defined in Federal Acquisition Regulation (FAR) 2.101, are statutorily exempt from CMMC requirements pursuant to 32 CFR § 170.3(c)(1).
- Micro-Purchases: Contracts, subcontracts, and purchases at or below the federal micro-purchase threshold (typically $10,000, subject to standard FAR adjustments) are excluded from CMMC applicability.
- Federal Contract Information (FCI) Only: Contractors whose contractual performance involves only Federal Contract Information and does not generate, receive, or handle CUI are subject only to CMMC Level 1 requirements (FAR 52.204-21 basic safeguarding), remaining outside the scope of Phase 2 C3PAO mandates.
- Subcontractor Flow-Down: Prime contractors are legally mandated under DFARS 252.204-7021(f) to flow down the exact required CMMC level to subcontractors based strictly on the sensitivity of the data shared. If a subcontractor handles CUI to execute their portion of the contract, the prime must verify the subcontractor holds the required CMMC Level 2 status in SPRS prior to subcontract award. Subcontractors handling only FCI require only Level 1.
What CMMC Phase 2 requires
CMMC Phase 2 operationalizes rigorous compliance criteria that extend far beyond informal security self-evaluations. To satisfy Phase 2 requirements, an organization must fulfill three integrated core mandates: complete technical implementation of the security standard, successful completion of an accredited independent audit, and executive affirmation.
First, an organization seeking certification (OSC) must implement all 110 security requirements across the 14 control families of NIST SP 800-171 Revision 2 within its defined assessment boundary. The 14 control families comprise:
- Access Control (AC) – 22 requirements
- Awareness and Training (AT) – 3 requirements
- Audit and Accountability (AU) – 9 requirements
- Configuration Management (CM) – 9 requirements
- Identification and Authentication (IA) – 11 requirements
- Incident Response (IR) – 3 requirements
- Maintenance (MA) – 6 requirements
- Media Protection (MP) – 8 requirements
- Personnel Security (PS) – 2 requirements
- Physical Protection (PE) – 6 requirements
- Risk Assessment (RA) – 3 requirements
- Security Assessment (CA) – 4 requirements
- System and Communications Protection (SC) – 16 requirements
- System and Information Integrity (SI) – 7 requirements
Second, the organization must undergo a formal third-party assessment conducted by an authorized C3PAO in accordance with the CMMC Assessment Process (CAP). The assessment team evaluates every control against all objective assessment determination statements specified in NIST SP 800-171A, utilizing the threefold evaluation methodology of interviewing personnel, inspecting documentation and evidence, and testing technical configurations.
Third, the program enforces strict scoring and Plan of Action and Milestones (POA&M) criteria codified in 32 CFR § 170.21. Unlike general NIST SP 800-171 self-scoring where contractors could carry indefinite open POA&Ms, Phase 2 establishes rigorous constraints:
- Minimum Score Threshold: An OSC must achieve a minimum SPRS assessment score of at least 88 out of 110 to be eligible for a conditional Level 2 certification.
- POA&M Restrictions: Only specific controls may be placed on a POA&M. Any control carrying a 5-point deduction value under the DoD scoring methodology cannot be placed on a POA&M. Instead, it must be fully implemented and validated at the time of assessment. Furthermore, critical foundational requirements—such as multi-factor authentication (MFA), FIPS-validated encryption, and boundary protection—disqualify an organization from receiving conditional certification if unmet.
- 180-Day Closeout Window: Any allowed POA&M items must be fully remediated and reassessed by the C3PAO within exactly 180 days of the initial assessment. If the OSC fails to close out all POA&M items within 180 days, the conditional certification lapses, and the contractor becomes non-compliant.
- Final Certification: A final, unconditional Level 2 certification requires achieving a perfect 110 out of 110 score, valid for a three-year cycle.
The table below summarizes the operational and regulatory differences between Phase 1 self-assessments and Phase 2 third-party certification assessments.
| Dimension | Phase 1: Level 2 (Self) | Phase 2: Level 2 (C3PAO) |
|---|---|---|
| Governing Authority | 32 CFR § 170.3(e)(1) / DFARS 252.204-7020 | 32 CFR § 170.3(e)(2) / DFARS 252.204-7021 |
| Assessment Conductor | Internal organizational staff or external advisor | Accredited, independent C3PAO and Certified Assessors |
| Required Technical Standard | NIST SP 800-171 Rev 2 (110 requirements) | NIST SP 800-171 Rev 2 (110 requirements assessed via 800-171A) |
| SPRS Score Submission | Self-calculated score uploaded directly by contractor | Official score and assessment report submitted by C3PAO |
| POA&M Durations | Contractor-managed schedule with no regulatory cap | Strict 180-day regulatory closeout window; 88/110 minimum score |
| Validity Period | Annual self-assessment affirmation | Three-year certification cycle with annual executive affirmations |
| Contract Insertion | Condition of award for non-prioritized CUI contracts | Condition of award for prioritized CUI defense solicitations |
Finally, Phase 2 requires an annual executive affirmation. In accordance with 32 CFR § 170.22, a designated senior company official—such as the Chief Executive Officer, Chief Operating Officer, or Chief Information Security Officer—must formally attest in SPRS annually that the organization continues to maintain uninterrupted compliance with all 110 requirements. Knowingly submitting a false affirmation exposes the company and executives to civil and criminal liability under the federal False Claims Act.
Compliance steps
Achieving compliance under CMMC Phase 2 requires an end-to-end operational roadmap spanning governance, technical architecture, and third-party coordination. Contractors should execute the following seven sequential compliance steps:
Step 1: Scoping and Asset Categorization
Contractors must establish their Level 2 assessment boundary using the official CMMC scoping guide published by the DoD CIO. All information assets within the organization must be categorized into one of five distinct groups: CUI Assets (systems processing, storing, or transmitting CUI), Security Protection Assets (assets providing security capabilities like identity providers, firewalls, and log collectors), Contractor Risk Managed Assets (assets that could theoretically access the CUI environment but have administrative and technical guardrails), Specialized Assets (test equipment, operational technology, IoT, and government-furnished equipment), and Out-of-Scope Assets (completely segregated systems with no logical or physical connectivity to the CUI boundary).
Step 2: Gap Analysis and System Security Plan (SSP) Formulation
The organization must perform a comprehensive control-by-control gap assessment against NIST SP 800-171A assessment objectives. The foundational document for the entire assessment is the System Security Plan (SSP), required by NIST control 3.12.4. The SSP must thoroughly detail system boundaries, network diagrams, hardware and software inventories, administrative policies, and the exact operational mechanisms used to satisfy every one of the 110 controls.
Step 3: Technical Remediation and Operational Evidence Gathering
Identified gaps must be remediated through technical implementation and policy enforcement. Critical high-frequency failure points include deploying FIPS 140-validated cryptographic modules for data in transit and at rest (SC.3.13.11), enforcing phishing-resistant multi-factor authentication across all local and remote administrative sessions (IA.3.5.3), establishing centralized log retention and analysis (AU.3.3.1), and operationalizing an incident response plan tested against federal reporting criteria.
Step 4: Evaluating Cloud Service Providers and External Service Providers
If the contractor utilizes cloud platforms (such as Microsoft 365, AWS, or Google Workspace) or Managed Service Providers (MSPs / MSSPs) to handle CUI or manage security boundaries, those entities fall directly within the assessment boundary. Under DFARS 252.204-7012, cloud services must be FedRAMP Moderate authorized or demonstrate full FedRAMP Moderate equivalency supported by an independent third-party assessment organization (3PAO) package. MSPs managing security protection assets must either hold an independent CMMC Level 2 certification or have their management infrastructure fully audited during the contractor’s assessment.
Step 5: Engaging an Accredited C3PAO
The contractor selects an accredited C3PAO from the Cyber AB Marketplace. Before signing an assessment contract, the contractor must verify that the C3PAO possesses an active DIBCAC authorization and utilizes certified lead assessors (CCAs). The organization conducts a formal readiness check to confirm that all policies have been operational and generating audit logs for at least 90 continuous days.
Step 6: Executing the C3PAO Assessment
The assessment proceeds across three structured phases governed by the CMMC Assessment Process: Phase 1 (Planning and Scoping Review), Phase 2 (Conducting the On-Site and Remote Assessment), and Phase 3 (Reporting). Assessors evaluate evidence files, inspect live configurations, and interview system administrators and end users. Upon conclusion, the C3PAO determines finding statuses (Met, Not Met, or Met with POA&M).
Step 7: POA&M Closeout and Annual Affirmation
If any allowable POA&M items were recorded, the organization executes remediation and schedules a delta assessment with the C3PAO within the 180-day statutory window. Once all controls are certified Met, the C3PAO uploads the official assessment report and recommendation to the Enterprise Mission Assurance Support Service (eMASS), which transmits the verified status into SPRS. The contractor’s executive then logs into SPRS to submit the initial annual affirmation of compliance.
Typical timeline phases
Achieving a CMMC Level 2 certification under Phase 2 is an extensive organizational undertaking that typically requires 12 to 24 months from project kickoff to formal certification. Rather than relying on calendar dates as standing facts, contractors should benchmark their progress against five sequential timeline phases:
- Phase A: Scoping, Boundary Definition, and Gap Assessment (Months 1–3): The organization discovers CUI flows, segments the corporate network to minimize assessment scope, catalogues all hardware and software assets, and conducts an objective gap assessment against NIST SP 800-171A.
- Phase B: Architecture Modernization and Technical Remediation (Months 4–10): The technical team implements required security controls, migrates email and collaboration systems to FedRAMP Moderate-compliant government clouds if necessary, deploys centralized logging, configures multi-factor authentication, and drafts comprehensive operating policies.
- Phase C: Policy Operationalization and Evidence Collection (Months 11–14): Security controls must operate in a steady state for a minimum of 90 days. During this window, the organization collects access logs, incident response drill records, vulnerability scan reports, and vendor assessment files to prove operational consistency.
- Phase D: C3PAO Scheduling and Assessment Execution (Months 15–18): The contractor contracts with an authorized C3PAO. Because lead assessor availability can introduce scheduling lead times of two to four months, scheduling should occur well in advance. The formal assessment itself typically lasts one to three weeks depending on organization size and site complexity.
- Phase E: POA&M Remediation and Formal Closeout (Months 18–24): If the assessment concludes with eligible open POA&M items, the organization remediates the findings and completes the mandatory C3PAO closeout audit prior to the strict 180-day deadline, establishing the three-year certification baseline.
Common mistakes
Organizations pursuing compliance during the CMMC Phase 2 window frequently encounter avoidable setbacks that inflate costs or cause assessment failure. The most critical mistakes include:
- Assuming the July 2026 Phase 2 Suspension Cancels NIST SP 800-171 Obligations: The most dangerous misconception in the defense community is believing that the DoD’s administrative suspension of mandatory C3PAO contract conditions relieves contractors of cybersecurity responsibilities. Phase 1 self-assessment requirements under 32 CFR § 170.3(e)(1), DFARS 252.204-7012 safeguarding rules, and False Claims Act enforcement remain fully active. Contractors misrepresenting their security posture in SPRS face immediate debarment and federal investigation.
- Conflating CMMC Phase 2 with CMMC Level 2: Planning teams that fail to distinguish the rollout phase from the technical tier often misinterpret contract language, leading to confusion over whether a solicitation requires an immediate third-party audit or an annual self-assessment.
- Overlooking Security Protection Assets and External Providers: Assessors frequently fail organizations because they omit external cloud tools, remote monitoring agents, or Managed IT Service Providers from their System Security Plan. If an MSP manages endpoints or firewalls, that MSP must satisfy CMMC requirements or be audited alongside the contractor.
- Deploying Non-Compliant Cloud Infrastructure: Utilizing standard commercial software-as-a-service (SaaS) products for CUI without verifying FedRAMP Moderate authorization or complete equivalency violates DFARS 7012. Many commercial clouds do not commit to U.S. sovereign data storage or 72-hour incident reporting requirements.
- Misjudging POA&M Allowances: Contractors often rely on plans of action for complex controls that are statutorily prohibited on a CMMC POA&M, such as 5-point deduction controls, multi-factor authentication, or basic boundary defenses. If any 5-point control is unmet during the C3PAO audit, conditional certification cannot be granted.
- Failing to Account for the 180-Day Regulatory Deadline: Unlike corporate IT roadmaps where deadlines can be pushed back, the 180-day POA&M closeout window in 32 CFR § 170.21 is absolute. Failing to close an item within 180 days results in immediate revocation of conditional certification.
- Neglecting Subcontractor Supply Chain Flow-Down: Prime contractors frequently wait until late in the proposal process to evaluate supplier compliance. If key subcontractors lack the requisite SPRS assessment score, the prime cannot legally issue subcontracts involving CUI, jeopardizing contract delivery.
Related programs
CMMC Phase 2 does not operate in isolation; it integrates into a broader web of federal cybersecurity regulations, defense acquisition standards, and cloud frameworks. Understanding how these programs interact is essential for comprehensive research compliance.
| Program / Clause | Governing Authority | Primary Focus and Scope | Relationship to CMMC Phase 2 |
|---|---|---|---|
| FAR 52.204-21 | Federal Acquisition Regulation | Basic safeguarding of contractor systems handling Federal Contract Information (15 controls) | Forms the baseline for CMMC Level 1; required prerequisite for all federal contractors. |
| DFARS 252.204-7012 | Defense Acquisition Regulations System | Safeguarding Covered Defense Information, NIST 800-171 compliance, and 72-hour incident reporting | The underlying contractual requirement that mandates NIST SP 800-171; CMMC validates compliance with this clause. |
| DFARS 252.204-7019 | Defense Acquisition Regulations System | Notice of NIST SP 800-171 DoD Assessment Requirements prior to award | Requires contractors to post a current basic self-assessment score into SPRS before contract award. |
| DFARS 252.204-7020 | Defense Acquisition Regulations System | NIST SP 800-171 DoD Assessment Requirements and DCMA DIBCAC audit access rights | Authorizes government assessment tiers (Medium and High) and grants DIBCAC access to facilities. |
| DFARS 252.204-7021 | Defense Acquisition Regulations System | Contractor compliance with CMMC program levels across contract lifecycle | The primary acquisition clause that operationalizes CMMC Phase 2 third-party certification mandates. |
| CMMC Level 1 | 32 CFR Part 170 | 15 basic cybersecurity safeguarding requirements for Federal Contract Information | Requires annual executive self-assessment in SPRS; fully active during Phase 1 and Phase 2. |
| CMMC Level 2 Assessment | 32 CFR Part 170 | 110 NIST SP 800-171 Rev 2 requirements protecting Controlled Unclassified Information | Split into self-assessment (Phase 1) and third-party C3PAO certification (Phase 2). |
| CMMC Level 3 | 32 CFR Part 170 | Selected NIST SP 800-172 requirements for high-priority programs against advanced persistent threats | Assessed directly by DCMA DIBCAC; scheduled for rollout in CMMC Phase 3 following Phase 2. |
| FedRAMP | General Services Administration | Security assessment framework for commercial cloud service offerings | CMMC Phase 2 mandates FedRAMP Moderate baseline equivalency for cloud platforms hosting CUI. |
For research universities and defense contractors seeking a complete regulatory breakdown of the transition from initial program rules to contractual implementation, our companion analysis on the CMMC final rule under 32 CFR Part 170 provides detailed historical and legal context.
Frequently asked questions
What is CMMC Phase 2?
CMMC Phase 2 is the second milestone in the Department of Defense’s four-phase implementation schedule established under 32 CFR § 170.3(e)(2). It introduces the requirement for independent third-party CMMC Level 2 Certification Assessments conducted by accredited C3PAOs as a condition of contract award for defense solicitations involving Controlled Unclassified Information.
How does CMMC Phase 2 differ from CMMC Level 2?
CMMC Level 2 is a technical security tier requiring implementation of the 110 cybersecurity requirements in NIST SP 800-171 Revision 2 to protect Controlled Unclassified Information. CMMC Phase 2 is the regulatory timeline phase that operationalizes Level 2 by making third-party C3PAO audit certifications mandatory in applicable defense solicitations and contracts.
What happened to CMMC Phase 2 in July 2026?
On July 13, 2026, the Department of Defense announced a temporary administrative suspension of mandatory Phase 2 contract conditions and established a 60-day CMMC Reform Task Force. The task force was directed to evaluate compliance costs for small businesses, address shortages of authorized C3PAO assessors, and explore ways to reduce administrative burdens while preserving defense industrial base cybersecurity.
Can contractors still obtain a voluntary CMMC Level 2 C3PAO certification?
Yes. The July 2026 suspension halted mandatory contract insertion by DoD contracting officers, but voluntary C3PAO assessments remain fully available through the Cyber AB Marketplace. Many prime defense contractors continue to encourage or contractually require commercial third-party certifications across their supply chains to ensure long-term subcontract eligibility.
Does the suspension of Phase 2 mean contractors do not need to comply with NIST SP 800-171?
No. The suspension of Phase 2 contract conditions does not alter underlying cybersecurity obligations. Contractors handling CUI remain legally bound by DFARS 252.204-7012, mandatory CMMC Phase 1 annual self-assessments, SPRS score submissions, and annual executive affirmations. Misrepresenting compliance status on federal systems constitutes a violation of the False Claims Act.
What are the scoring thresholds and POA&M rules under CMMC Phase 2?
Under 32 CFR § 170.21, an organization must achieve a minimum score of 88 out of 110 to qualify for conditional Level 2 certification. Any allowable Plan of Action and Milestones (POA&M) items must be remediated and verified by the C3PAO within 180 days. Controls carrying 5-point deduction values cannot be placed on a POA&M and must be fully implemented at the time of assessment.
How long is a CMMC Level 2 certification valid once achieved during Phase 2?
A full CMMC Level 2 Certification Assessment achieved through an accredited C3PAO is valid for three years from the date of final certification, provided the organization submits an annual executive affirmation in SPRS confirming continuous compliance with all 110 NIST SP 800-171 requirements.
Sources
- Federal Register: Cybersecurity Maturity Model Certification (CMMC) Program Final Rule (32 CFR Part 170), 89 FR 83088, https://www.federalregister.gov/documents/2024/10/15/2024-22905/cybersecurity-maturity-model-certification-cmmc-program, accessed 2026-11-15
- Electronic Code of Federal Regulations: 32 CFR § 170.3 – Applicability and Implementation, https://www.ecfr.gov/current/title-32/subtitle-A/chapter-I/subchapter-M/part-170/section-170.3, accessed 2026-11-15
- Federal Register: Defense Federal Acquisition Regulation Supplement: Cybersecurity Maturity Model Certification (DFARS Case 2019-D041 / DFARS 252.204-7021), https://www.federalregister.gov/documents/2025/09/10/2025-18921/defense-federal-acquisition-regulation-supplement-cybersecurity-maturity-model-certification, accessed 2026-11-15
- National Institute of Standards and Technology: NIST Special Publication 800-171 Revision 2: Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations, https://csrc.nist.gov/publications/detail/sp/800-171/rev-2/final, accessed 2026-11-15
- DoD Chief Information Officer: CMMC Documentation and Level 2 Scoping Guidance, https://dodcio.defense.gov/CMMC/Documentation/, accessed 2026-11-15
- U.S. Department of Defense: DoD Announces CMMC Reform Task Force and Phased Rollout Review, https://www.defense.gov/News/Releases/Release/Article/3842109/dod-announces-cmmc-reform-task-force-and-phased-rollout-review/, accessed 2026-11-15
Data: CMMC Implementation Phases and Regulatory Mandates Comparison
Original compilation comparing the four implementation phases of the Cybersecurity Maturity Model Certification (CMMC) program codified in 32 CFR 170.3(e) and DFARS 252.204-7021, detailing assessment types, contract conditions, discretionary authorities, and operational status as of 2026.
Period covered: 2024/2028. Coverage: United States.
| Implementation Phase | Regulatory Start Trigger | Assessment Types Mandated | Contract Insertion Mechanism | Discretionary Authority | SPRS Affirmation Required | Operational Status |
|---|---|---|---|---|---|---|
| Phase 1 | Effective date of DFARS acquisition rule (48 CFR Part 204) | Level 1 (Self) and Level 2 (Self) | Condition of award for applicable solicitations; discretionary for option periods | DoD may require Level 2 (C3PAO) in place of Level 2 (Self) on specific contracts | Annual senior official affirmation required in SPRS | Active and mandatory across defense contractors handling CUI |
| Phase 2 | One calendar year following Phase 1 start date | Level 1 (Self), Level 2 (Self), and Level 2 (C3PAO) | Level 2 (C3PAO) as condition of contract award for applicable solicitations | DoD may delay Level 2 (C3PAO) to option periods; may pilot Level 3 (DIBCAC) | Annual senior official affirmation required in SPRS | Mandatory C3PAO award condition suspended July 13, 2026 pending Task Force |
| Phase 3 | Two calendar years following Phase 1 start date | Level 1 (Self), Level 2 (Self), Level 2 (C3PAO), and Level 3 (DIBCAC) | Level 2 (C3PAO) in award and option periods; Level 3 (DIBCAC) for award | DoD may delay Level 3 (DIBCAC) to option periods | Annual senior official affirmation required in SPRS | Pending Task Force regulatory revisions |
| Phase 4 (Full Implementation) | Three calendar years following Phase 1 start date | All CMMC levels and assessment types per program design | Condition of award and all option periods across all applicable contracts | No discretionary delays permitted; full program applicability | Annual senior official affirmation required in SPRS | Pending Task Force regulatory revisions |
Sources
- 32 CFR Part 170 — CMMC Program Final Rule (accessed 2026-11-15)
- Electronic Code of Federal Regulations: 32 CFR § 170.3 (accessed 2026-11-15)
- Defense Federal Acquisition Regulation Supplement: CMMC (DFARS Case 2019-D041) (accessed 2026-11-15)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







