Skip to main content
v2026.11,986 entries · CC-BY 4.0

Cooling Block: Types, Bench Use & Lab Protocols

A guide to laboratory cooling blocks: comparing thermo-conductive alloy modules and phase-change coolers, thermal performance, and aseptic bench protocols.

Written and maintained by CASRAI Editorial Board

Published

On this page

Short answer

A cooling block is a precision laboratory benchtop accessory engineered to maintain sample microtubes, PCR strips, and microplates at stable, uniform cold temperatures (typically 0 °C to 4 °C, or cryogenic ranges down to -196 °C) without direct immersion in melting ice baths or hazardous solvent slurries, eliminating sample contamination, tube flotation, and thermal inconsistency.

Definition and scope

A cooling block—also termed a tube cooling rack, cryo-block, or thermo-conductive module—is a benchtop temperature-retention device used in laboratory facilities. Its primary role is to preserve thermal-labile biomolecules during benchtop preparation, sample aliquoting, enzymatic digestions, and pipetting.

Enzymes such as Taq polymerase, reverse transcriptase, and restriction endonucleases rapidly degrade if exposed to room temperature fluctuations. Extracted RNA, biopsy lysates, and fluorophore-conjugated antibodies require continuous cold maintenance. Unlike general labware such as optical cuvettes or sample processing tools like probe sonicators, cooling blocks act as localized thermal stabilizers.

Cooling blocks accommodate standard lab vessel formats:

  • Microcentrifuge Tubes: Wells for 0.5 mL, 1.5 mL, and 2.0 mL tubes.
  • PCR Formats: Arrays for 0.2 mL tubes, 8-tube strips, and 96-well or 384-well microplates meeting Society for Biomolecular Screening (SBS) footprint standards.
  • Vials and Centrifuge Tubes: Wells for 1.0–5.0 mL cryogenic vials or 15 mL and 50 mL conical centrifuge tubes.

How it works or how it is used in practice

Cooling blocks replace unpredictable heat transfer from melting ice with uniform conductive thermal transfer. Modern units operate via two mechanisms:

  • Solid Thermo-Conductive Metal Alloys: Machined from solid aluminum alloys without fluids, heat conducts rapidly from external ice, dry ice, or baths to achieve ±0.1 °C well uniformity.
  • Latent Heat Phase-Change Matrices: Enclosed polymer coolers contain eutectic coolant gels. Pre-frozen at -20 °C, the gel’s latent heat of fusion maintains wells at 0 °C to 4 °C for 1 to 2 hours without an ice bucket. Built-in thermochromic dye indicators shift color (e.g., purple to pink) if well temperatures rise above 7 °C.

Laboratories implement cooling blocks using standard bench procedures:

  1. Benchtop Ice-Bath Stabilization: Place an alloy block atop crushed ice. It equilibrates to <4 °C in 60 to 90 seconds. Tubes remain dry and upright at <4 °C as long as ice remains beneath the block.
  2. Snap-Freezing on Dry Ice: Place an alloy block on dry ice pellets. The block cools to -78 °C in 5 to 7 minutes, snap-freezing samples without solvent fumes or peeling labels.
  3. Pre-Chilled Phase-Change Operation: Freeze gel coolers (e.g., Eppendorf PCR-Cooler) at -20 °C for at least 2 hours bottom-side up for uniform gel settling. Equilibrate on the bench for 10 minutes before loading reagents.
  4. Centrifugation Limits: Cooling blocks must never be centrifuged; centrifugal forces rupture internal coolant bladders. Transfer microtubes to balanced rotors per microcentrifuge operation safety protocols.

Selecting cooling hardware depends on target temperatures, hold duration, and sterilization methods. The following table summarizes standard cooling block technologies:

Technology Type Operating Mechanism Temperature Range Bench Hold Duration Well Uniformity Sterilization & Care Primary Source
Solid Thermo-Conductive Alloy Block (e.g., Corning CoolRack) Passive metal alloy matrix adapting to external thermal base -196 °C to >100 °C Indefinite (tracks external thermal reservoir) ±0.1 °C across all wells Autoclavable (121 °C, 20 min); bleach and alcohol resistant Corning CoolRack Technical Specifications
Phase-Change PCR Cooler (e.g., Eppendorf PCR-Cooler) Eutectic phase-change gel with thermochromic color indicator 0 °C to 7 °C (pre-frozen at -20 °C) >1 hour at 0 °C (at 22 °C ambient) Uniform across 96 wells Wipe with 70% ethanol; not autoclavable; do not centrifuge Eppendorf PCR-Cooler Operating Manual
Modular Insulated Pack System (e.g., Eppendorf IsoTherm) Modular IsoRack work rack, calibrated IsoPack, and IsoSafe housing 0 °C (White pack) or -21 °C (Blue pack) Up to 6 hours at 0 °C; up to 3 hours at -21 °C Insulated perimeter prevents edge effects IsoRack is autoclavable (121 °C); packs wipe-clean with detergent Eppendorf IsoTherm Operating Instructions
Thermoelectric Peltier Block (Dry Bath System) Active solid-state heat pump with electronic digital feedback -10 °C to 105 °C Continuous active temperature control ±0.2 °C to ±0.5 °C Removable aluminum inserts are autoclavable; console wipe-down only Laboratory Dry Bath Specifications

Where it matters for labs, clinics or supply decisions

Cooling blocks provide clear operational advantages over traditional ice buckets:

Aseptic Integrity and Contamination Control: Communal ice buckets harbor environmental biofilms, including Pseudomonas species, fungi, and airborne RNases. Submerging microtubes in melting ice causes capillary action around cap seals, contaminating samples. Meltwater also detaches tube labels. Solid blocks keep tubes completely dry, preserving sample integrity in line with CDC/NIH Biosafety in Microbiological and Biomedical Laboratories (BMBL) standards.

Reaction Fidelity in Molecular Assays: Setting up real-time PCR on platforms like QuantStudio real-time PCR systems requires keeping master mixes cold to prevent primer-dimer artifacts and premature polymerase activity. Conductive blocks keep multi-well plates uniformly chilled until cycling begins.

Automation Integration: Standard SBS-footprint cooling blocks fit automated liquid handlers and robotic decks where open ice pans are prohibited due to spillage risks.

Facility Sterilization: Solid alloy blocks withstand standard autoclave sterilization temperatures (121 °C for 20 minutes) for facilities supervised by an Institutional Biosafety Committee (IBC). Conversely, gel coolers cannot be autoclaved and must be sanitized chemically with 70% alcohol.

Common misunderstandings

  • Misunderstanding: All cooling blocks can be autoclaved. Solid aluminum blocks are autoclavable at 121 °C, but gel-filled coolers melt or burst under autoclave pressure. Gel units must be surface-sanitized with 70% alcohol.
  • Misunderstanding: Crushed ice cools tubes more evenly than metal blocks. Crushed ice leaves air pockets causing 3 °C to 5 °C variations between the tube bottom and meniscus. Solid alloy blocks deliver ±0.1 °C uniformity across every well.
  • Misunderstanding: Phase-change coolers freeze evenly in any position. Coolers must freeze bottom-up so coolant gel settles evenly beneath well cavities. Freezing right-side up impairs cooling performance.
  • Misunderstanding: Samples can be centrifuged inside cooling blocks. Cooling blocks are strictly bench racks. Centrifugation ruptures gel chambers and cracks plastic housings. Tubes must be transferred to dedicated rotors.
  • Misunderstanding: Metal blocks cannot be used at cryogenic temperatures. Solid alloy modules withstand temperatures down to -196 °C in liquid nitrogen vapor, offering a dry snap-freezing alternative to solvent baths when handled with cryogenic PPE.

FAQ

How long does a pre-chilled phase-change cooling block remain cold on the bench?

A phase-change PCR cooler pre-frozen at -20 °C for 2 hours maintains 0 °C for over 1 hour at 22 °C ambient. Insulated modular systems maintain 0 °C for up to 6 hours or -21 °C for up to 3 hours.

What does a color change on a thermochromic cooling block indicate?

A color change (such as purple to pink) indicates that well temperature has risen above 7 °C, warning operators that enzymes and RNA samples may be undergoing thermal degradation.

Can solid metal cooling blocks be placed directly on dry ice or liquid nitrogen?

Yes. Solid alloy blocks operate from -196 °C to >100 °C. Placed on dry ice, they equilibrate to -78 °C in 5 to 7 minutes, providing a dry snap-freezing platform without hazardous solvents.

Why are cooling blocks preferred over ice buckets for PCR setup?

Cooling blocks keep tubes dry, preventing capillary entry of waterborne RNases and bacteria around cap seals. They also prevent floating tubes, peeling labels, and uneven chilling.

How should laboratory cooling blocks be decontaminated?

Solid alloy blocks can be autoclaved at 121 °C for 20 minutes or wiped with 10% bleach and 70% ethanol. Gel-filled coolers cannot be autoclaved and must be surface-wiped with 70% alcohol.

Sources

  • Corning Inc. — Corning® CoolRack® and CoolBox™ Systems Operating Instructions and Technical Specifications. URL: https://www.corning.com/life-sciences/ (Read November 10, 2026).
  • Eppendorf SE — Eppendorf PCR-Cooler Operating Manual / Instructions for Use. URL: https://www.eppendorf.com/ (Read November 10, 2026).
  • Eppendorf SE — Eppendorf IsoTherm-System Operating Instructions. URL: https://www.eppendorf.com/ (Read November 10, 2026).
  • CDC / NIH — Biosafety in Microbiological and Biomedical Laboratories (BMBL), 6th Edition. URL: https://www.cdc.gov/ (Read November 10, 2026).

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about Cooling Block: Types, Bench Use & Lab Protocols

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →