Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and standards information for laboratory and clinic staff. It is not medical advice and not a collection procedure; follow the receiving laboratory’s own instructions.
Short answer
A dried blood spot (DBS) is a blood specimen that is collected onto a printed filter paper card, left to air dry, and sent to a laboratory for testing. In the United States a widely cited standard for the practice is CLSI NBS01, Dried Blood Spot Specimen Collection for Newborn Screening, whose seventh edition was published on April 16, 2021. The card and envelope a program accepts are set by the receiving laboratory, not by the card’s brand name.
Definition and scope
“Dried blood spot,” “blood spot card,” “DBS card” and “dried blood spot collection” all describe the same basic arrangement: blood applied to printed circles on filter paper, dried, and transported as a dry specimen. Product names such as Whatman 903 (also sold as the Protein Saver card) and FTA card refer to specific commercial cards and matrices; this page uses them only as names and does not state product specifications.
CLSI describes NBS01 as a standard for collecting blood specimens for newborn screening programs, covering equipment, sources of blood, collection sites and techniques. Its stated purpose is to improve and ensure the quality of DBS specimens collected from newborns. CLSI also states that the standard does not address local newborn screening program requirements or local policies on unacceptable specimens (CLSI).
How dried blood spot specimens are used in practice
Two layers of rules apply, and they are easy to confuse.
What the standard covers
According to CLSI’s description of NBS01, the standard sets minimum information requirements for the collection device and minimum requirements for the filter paper matrix. It also covers handling, shipping, retention and storage of DBS specimens, and it includes venous, umbilical catheter and femoral catheter blood as alternative sources.
What a program adds
Newborn screening programs publish their own provider guidance. The South Dakota Department of Health collection and handling page is one state example. It publishes its own rules for the filter paper card and for drying the specimen, and it states that humidity and moisture are detrimental to the stability of dried blood spot specimens and can affect results.
For shipping, the same page says specimens go by the contract laboratory’s courier, in the envelope the laboratory provides rather than plastic or sheet-protector envelopes, and that facilities should be mindful of the time between collection and shipment. These are one state program’s rules, not a universal specification.
Types and related terms
Search terms and product names overlap, so it helps to separate what each one actually names.
| Term | What it names | Source basis |
|---|---|---|
| Dried blood spot (DBS) | The specimen: blood dried onto filter paper | CLSI NBS01 title and purpose statement |
| DBS card, blood spot card, dried blood spot card | The printed filter paper collection device | CLSI NBS01 scope (device and filter paper matrix requirements) |
| Whatman 903, Protein Saver card, FTA card | Commercial card and matrix brand names | Names only; no specifications are stated here |
| Blood specimen collection device (21 CFR 862.1675) | Regulatory device type: a device to collect and handle blood specimens and separate serum from cellular components before testing; Class II | eCFR 21 CFR 862.1675(a) and (b) |
The eCFR text defines the generic blood specimen collection device type. Its wording describes collection and handling devices generally and does not itself name filter paper cards, so this page does not state how any particular card is classified.
Where it matters for labs, clinics and supply decisions
The sources above point to a practical distinction that product listings tend to blur: the standard defines what information a collection device and filter paper matrix must carry, while the receiving program defines what it will accept. Because NBS01 leaves local program requirements and unacceptable-specimen policies to the programs themselves, the receiving laboratory’s instructions are the reference for which card and envelope to use.
What the sources identify as relevant for staff who stock or handle these cards:
- Expiration date: cards carry one, which programs such as South Dakota’s refer to.
- Humidity: moisture is named as harmful to specimen stability, so storage and handling conditions matter.
- Envelope: the laboratory-provided one; plastic and sheet-protector envelopes are excluded by that program.
- Transit time: programs track the time from collection to shipment.
Related CASRAI pages cover adjacent practice: specimen labeling error prevention, the phlebotomy lab supply checklist, the biospecimen definition, cold chain concepts, and the biobank entry for long-term storage.
Common misunderstandings
“All DBS cards are the same.”
Whatman 903, FTA and similar names are specific products. The standard sets minimum matrix and device information requirements, and the receiving program decides what it accepts, so a card name alone does not tell you whether a program will take it.
“Any packaging will do for shipping.”
The South Dakota program names the laboratory-provided envelope and excludes plastic and sheet-protector envelopes.
“21 CFR 862.1675 is the rule for DBS cards.”
The regulation defines a general blood specimen collection device type and its Class II designation. Its text, as read, does not mention filter paper cards.
“NBS01 sets every rule for a program.”
CLSI states that it does not address local program requirements or local unacceptable-specimen policies.
FAQ
What is a dried blood spot?
A blood specimen dried on a printed filter paper card and shipped dry to a laboratory for testing.
Which standard covers dried blood spot collection for newborn screening?
CLSI NBS01, seventh edition (NBS01Ed7E), published April 16, 2021, which replaced the 2013 NBS01-A6.
Who decides which card and drying rules apply?
The receiving laboratory or newborn screening program. CLSI NBS01 leaves local program requirements to them, so follow the instructions that come with the program’s cards.
Can I use any envelope to mail the card?
One state program says to use only the laboratory-provided envelope and not plastic or sheet-protector envelopes.
Is Whatman 903 the same as a DBS card?
Whatman 903 is one named brand of card; “DBS card” is the generic description.
Sources
- CLSI, Dried Blood Spot Specimen Collection for Newborn Screening, NBS01, 7th ed. (NBS01Ed7E), https://clsi.org/nbs01-gate/, checked 2026-10-30.
- eCFR, 21 CFR 862.1675, Blood specimen collection device, https://www.ecfr.gov/current/title-21/chapter-I/subchapter-H/part-862/subpart-B/section-862.1675, checked 2026-10-30.
- South Dakota Department of Health, Newborn Screening Blood Spot: Collection and Handling for Providers, https://doh.sd.gov/programs/newborn-screening/blood-spot/for-providers/collection-handling, checked 2026-10-30.







