Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and regulatory information for clinic, lab and supply staff. It is not medical advice and does not say when or whether any person should use a leg rest.
Short answer
An elevating leg rest is a wheelchair leg-support component. In US federal regulation it sits in the same device family as footrests and leg rests: wheelchair components, Class I, and exempt from premarket notification (21 CFR 890.3920, checked 2026-10-31). The regulation does not use the phrase “elevating leg rest”, so fitting and durability guidance here comes from the footrest provisions in WHO’s 2008 wheelchair guidelines.
Definition and scope
21 CFR 890.3920 defines a wheelchair component as a device intended for medical purposes that is generally sold as an integral part of a wheelchair, but may also be sold separately as a replacement part. The listed examples include the armrest, cushion, antitip device, footrest, handrim and leg rest. The list gives examples; it is not a closed catalogue of product names.
“Elevating” is a manufacturer descriptor, not a defined regulatory category. On this page the term means a leg rest mounted on a wheelchair and designed to be positioned at a raised angle, as the name indicates. Where a source speaks only about footrests, this page says so and does not attribute elevating-specific claims to it.
Where adaptive seating fits
Adaptive seating is the wider seating-and-positioning context in which leg supports, cushions, and head and trunk supports are chosen together for one user. In the regulation, the leg rest and cushion are named wheelchair components under 890.3920. The wheelchair accessories guide explains that component-versus-accessory split.
How footrest and leg support parts are used in practice
WHO’s Guidelines on the provision of manual wheelchairs in less resourced settings (2008, checked 2026-10-31) describes the footrest as the part that gives the user support for the feet and legs, and states that footrests must be individually adjusted for each user. These statements concern footrests in general. They are the closest primary guidance to leg-rest fitting and are used below as a checklist, not as an elevating-leg-rest specification.
Types and related concepts
| Term | What the source says | Source |
|---|---|---|
| Wheelchair component | Medical device generally sold as part of a wheelchair, also sold separately as a replacement part. Footrest and leg rest are named examples. | 21 CFR 890.3920(a) |
| Removable footrest | Removable footrests can allow a user to pull up closer to surfaces; the downside is that removable components can get lost. | WHO 2008, transfers table |
| Calf strap | Footrests may include a calf strap to keep the foot on the footplate. | WHO 2008, section 2.5.4 |
Where it matters for labs, clinics and supply decisions
Regulatory status of the part
Under 890.3920(b), wheelchair components are Class I (general controls) and exempt from the premarket notification procedures in subpart E of part 807, subject to the limitations in 21 CFR 890.9. A leg rest sold alone as a replacement part is therefore classified as a component in the same way as one supplied with a complete chair. Class I status describes the level of FDA regulatory control. It is not a statement about suitability for any particular user.
Checklist from WHO footrest guidance
Every row below is taken from the WHO 2008 guidelines. Use it as a reading aid when comparing manufacturer documentation, not as a substitute for the manufacturer’s instructions for use or for a clinician’s fitting.
| Check | WHO 2008 statement |
|---|---|
| Individual adjustment | Footrests must be individually adjusted for each user. |
| Height adjustment | The height of the footrest should be adjustable. |
| Ground clearance | Sufficient ground clearance is needed so the footrest does not hit obstacles or catch and tip the wheelchair on uneven ground. |
| Forward tipping | If footrests are ahead of the front wheels, weight placed on them (a heavy child, for example) can tip the wheelchair forwards. |
| Folding force | A footrest should fold with a reasonable amount of force. |
| Strength | A footrest should not break or bend when used to lift the user and wheelchair, or when hitting a wall or curb. |
| Locking mechanisms | Locks can fail, creating a dangerous situation when an assistant lifts the wheelchair and user up stairs while holding the footrests. |
| Removable parts | Removable components can get lost. |
For how leg supports relate to the rest of the chair, see wheelchair parts; for the chair itself, what is a wheelchair; for coding of complete chairs, wheelchair HCPCS codes.
Common misunderstandings
- “The FDA regulation defines elevating leg rests.” It does not. 890.3920 names “footrest” and “leg rest” as examples of wheelchair components and does not describe elevating mechanisms.
- “Class I means no oversight.” Class I devices are subject to general controls. The exemption is from premarket notification, subject to the limits in 890.9.
- “WHO footrest guidance is about elevating leg rests.” The 2008 guidelines address footrests on manual wheelchairs in less-resourced settings. They are a useful framework but say nothing specific about elevating mechanisms.
FAQ
What is an elevating leg rest?
It is a wheelchair leg support designed to be set at a raised angle. Federal regulation covers wheelchair leg rests and footrests as wheelchair components under 21 CFR 890.3920, Class I.
What is the difference between a leg rest and a footrest in the regulation?
890.3920 lists “footrest” and “leg rest” separately as examples of wheelchair components and gives no further definition of either.
How does an elevating leg rest relate to adaptive seating?
Adaptive seating is the broader seating-and-positioning context. The leg rest is one component within it, alongside items such as cushions.
Is a leg rest bought separately regulated differently?
The regulation states that wheelchair components are generally sold as part of a wheelchair but may also be sold separately as a replacement part, under the same classification.
Sources
- 21 CFR 890.3920, Wheelchair component, eCFR, checked 2026-10-31.
- World Health Organization, Guidelines on the provision of manual wheelchairs in less resourced settings (2008), section 2.5.4 and associated tables, checked 2026-10-31.







