Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
A foreign trade zone (FTZ) is a designated area in the United States, in or adjacent to a U.S. Customs and Border Protection (CBP) port of entry, where imported goods can be held, handled or used without paying duty at entry. Duty is deferred until the goods enter U.S. commerce, and is not paid at all on goods later exported or destroyed in the zone (Congressional Research Service, IF11348). This guide is general regulatory information, not customs, legal or tax advice.
Short answer
An FTZ is a customs-supervised site authorized under the Foreign-Trade Zones Act of 1934 (19 U.S.C. 81a-81u). Imported merchandise placed in a zone is not charged duty at entry; the CRS summary states that users pay duty only when goods enter the United States for consumption, and that no duty is paid on imported goods that are later exported or destroyed in a zone. Zone sites are authorized by the FTZ Board and supervised by CBP.
Definition and scope
Two sets of federal regulations govern zones. The FTZ Board’s rules are in 15 CFR Part 400, and CBP’s operating rules are in 19 CFR Part 146. Under 15 CFR 400.2 a zone includes all sites and subzones designated under the sponsorship of a zone grantee, and zones are in or adjacent to a CBP port of entry. The FTZ Board consists of the Secretary of Commerce (chairman) and the Secretary of the Treasury, or their designated alternates (15 CFR 400.2(d)); CRS adds that the Secretary of the Treasury serves as the Board’s executive officer (IF11348).
For scale, CRS reported that in 2018 there were 195 active zones out of 260 approved, and that merchandise received in zones that year was valued at $794 billion, of which 63% ($497 billion) was domestic-status goods. These are 2018 figures and are not current counts.
How a zone is used in practice
The practical effects described by CRS are three:
- Deferral. Duty is owed when goods leave the zone into U.S. commerce, not when they arrive in the zone.
- Exemption. No duty is paid on imported goods subsequently exported out of, or destroyed in, a zone.
- Inverted tariff. Where the duty rate of a finished good is lower than the rate on its inputs, a user may elect the lower rate. Production of this kind requires production authority from the FTZ Board.
Merchandise status: the part most explainers skip
Under 19 CFR 146.41, foreign merchandise that has not been manipulated or manufactured so as to change its tariff classification is given privileged foreign status on proper application to the CBP port director. The application is made on Customs Form 214 at admission, or later but before any manipulation or manufacture that changes classification. Once elected, privileged foreign status cannot be abandoned and stays attached to the goods even if their form changes, except in the case of recoverable waste. Under the regulation, status is decided when the merchandise is admitted or before it is manipulated or manufactured, so the paperwork order matters.
Zone, subzone and usage-driven site
These terms are defined in 15 CFR 400.2 and are often used loosely. The table uses only the regulation’s own definitions.
| Term | What the regulation says | Citation |
|---|---|---|
| Zone | Includes all sites and subzones designated under the sponsorship of a zone grantee | 15 CFR 400.2(h) |
| Subzone | A site, or group of sites, established for a specific use | 15 CFR 400.2(s) |
| Usage-driven site | A site established for a single operator or user under the alternative site framework | 15 CFR 400.2(t) |
| Zone operator | A party that operates within a zone or subzone under agreement with the grantee | 15 CFR 400.2(v) |
| Zone user | A party using a zone under agreement with a zone operator | 15 CFR 400.2(z) |
The regulation describes the alternative site framework as giving greater flexibility and responsiveness to serve single-operator or single-user locations (15 CFR 400.2(c)).
Where it matters for labs, clinics and supply decisions
Laboratories and clinics rarely deal with a zone directly. It becomes relevant when equipment or consumables pass through a distributor, importer or manufacturer that uses one. The terms above give a precise vocabulary for questions to put to a supplier or customs broker:
- Is the item being admitted to a zone, or entered into U.S. commerce? Under the CRS summary, duty falls at entry into commerce, not at admission to the zone.
- Does the supplier act as zone operator or zone user under 15 CFR 400.2(v) and (z)?
- Was privileged foreign status elected on Customs Form 214 before any classification-changing manufacture (19 CFR 146.41)?
Related CASRAI pages cover adjacent import mechanics. The customs bond guide lists the bond that applies to a foreign trade zone operator (19 CFR 113.73), and the harbor maintenance fee guide covers how that fee relates to FTZ admissions. For permits on biological and laboratory materials see CDC import permits, and for the wider purchasing process see the lab equipment and supplies procurement guide. Tariff classification itself is covered under HS codes for chemicals.
Common misunderstandings
Duty-free does not mean never taxed
Duty is deferred, or exempted only on goods that are exported or destroyed in the zone. Goods that enter U.S. commerce owe duty at that point.
A zone is not a free-for-all manufacturing site
Production in a zone requires production authority from the FTZ Board, according to CRS.
Privileged foreign status is not reversible
Once elected under 19 CFR 146.41 it stays with the goods, even after manipulation or manufacture, apart from recoverable waste.
FAQ
What is a foreign trade zone?
A designated site in or adjacent to a CBP port of entry, authorized under the Foreign-Trade Zones Act of 1934, where imported goods can be held or used without duty being paid at entry.
Who regulates foreign trade zones?
The FTZ Board (15 CFR Part 400), made up of the Secretary of Commerce (chairman) and the Secretary of the Treasury, and CBP (19 CFR Part 146), which supervises zone operations.
What is the difference between a zone and a subzone?
A zone includes all sites and subzones under a grantee’s sponsorship; a subzone is a site or group of sites established for a specific use (15 CFR 400.2(h), (s)).
Sources
- eCFR, 15 CFR 400.2, definitions: ecfr.gov/current/title-15/part-400/section-400.2 (checked 2026-11-01)
- eCFR, 19 CFR 146.41, status designations: ecfr.gov/current/title-19/part-146/section-146.41 (checked 2026-11-01)
- Congressional Research Service, In Focus IF11348, Foreign Trade Zones, 26 February 2020: everycrsreport.com copy (checked 2026-11-01)







