Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product information only, not medical advice. For fitting or device questions, speak to a hearing care professional.
Hearing aid zinc-air button cells are sold as size 10, 312, 13 and 675. Each is also known by an IEC code (PR70, PR41, PR48, PR44), and the number and code printed on the pack identify the size. This page is a lookup chart taken from the manufacturers’ own data sheets, followed by how to read a label and what to check before ordering. For how the cell works, see zinc-air battery.
Hearing aid battery size chart
Values below are nominal figures from Renata hearing aid battery technical data sheets (ZA10, ZA13, ZA312, ZA675; Vers. 02, June 2015). Renata states the dimensions are “according IEC 60086-2 (Ed.12 Feb. 2011)”. All four are zinc/air cells with a nominal voltage of 1.45 V.
| Common size | IEC code | Diameter | Height | Nominal capacity (Renata) |
|---|---|---|---|---|
| 10 | PR70 | 5.8 mm (0.228 in) | 3.6 mm (0.142 in) | 105 mAh |
| 312 | PR41 | 7.9 mm (0.311 in) | 3.6 mm (0.142 in) | 165 mAh |
| 13 | PR48 | 7.9 mm (0.311 in) | 5.4 mm (0.213 in) | 305 mAh |
| 675 | PR44 | 11.6 mm (0.457 in) | 5.4 mm (0.213 in) | 660 mAh |
Check your product’s labelling. Capacity and weight differ between brands, so the capacity column is one maker’s (Renata’s) figure, not a universal value. Always confirm against the pack and the hearing aid’s own manual.
What do the numbers and abbreviations on the label mean?
One cell can carry several names. Rayovac’s product data sheet for its size 312 cell (S6600584, Issue C) lists the designation as “IEC: PR41 / ANSI: 7002ZD / Common: 312”. So a pack marked 312, PR41 or 7002ZD describes the same size.
- Common number (10, 312, 13, 675): the name used on packs and in hearing aid manuals.
- IEC code (PR70, PR41, PR48, PR44): the designation used in IEC 60086-2, the standard the maker cites for the dimensions.
- ANSI code (for example 7002ZD): the US designation. The Rayovac sheet used here gives an ANSI code for the 312 only, so none is listed for the other sizes.
- 1.45 V: nominal voltage shown on the Renata and Rayovac sheets.
- mAh: nominal capacity, the charge the cell is rated to deliver. Use it to compare like with like within one brand’s sheet.
How to read a manufacturer spec sheet
Start with the designation block, which ties the common number to the IEC (and sometimes ANSI) code. Then read the dimensions, which both sheets tie to IEC 60086-2, and the nominal voltage and capacity. Finally read the disclaimer: Renata’s sheets say the information is “for reference purpose only” and subject to change without notice, and Rayovac’s says performance information is typical and not a warranty. A data sheet describes a nominal cell; it does not promise how long one will last in a particular device.
The sheets also carry handling points. Renata notes these cells need air when in use, so the battery compartment must allow free air access, and lists self-discharge of less than 5% per year at 20 C with the label applied. Rayovac’s size 312 sheet gives a storage guarantee of four years with the tab applied when stored at 21 C. That is one maker’s figure for one product.
Which specification matters most when ordering for a facility?
The data sheets point to size first: diameter and height must match the device compartment, and the common number plus IEC code identify that size. The sources do not rank voltage or capacity above this. A facility ordering for several device styles, such as those in the audiology clinic supply checklist, can match each device’s manual to a size from the chart, then confirm the code on the supplier’s listing.
What compatibility questions should I ask before ordering?
- Which size does the device manual name (10, 312, 13 or 675)?
- Does the supplier’s listing show the same common number and the IEC code from the chart?
- Can the supplier provide the manufacturer’s data sheet for the exact product?
- What do the pack instructions say about the tab and storage?
Device style usually decides the size, so the manual is the authority. For background on two common styles see BTE hearing aids and CIC hearing aids.
Common mix-ups
The chart shows why look-alike sizes get confused. Size 312 and size 13 share a 7.9 mm diameter and differ only in height (3.6 mm versus 5.4 mm). Size 10 and size 312 share a 3.6 mm height and differ in diameter (5.8 mm versus 7.9 mm). Size 13 and size 675 share a 5.4 mm height. Small differences in one dimension can mean a cell that does not fit the compartment, so confirm the number, not just the look.
FAQ
Are the PR codes the same as the numbers 10, 312, 13 and 675?
Yes for these four, according to the Renata sheets: 10 is PR70, 312 is PR41, 13 is PR48 and 675 is PR44.
Does a pack colour tell me the size?
No standard cited on this page defines a colour code for these sizes. Read the printed number or IEC code and check it against the device manual.
Can I use a different brand of the same size?
The sizes in the chart are defined by IEC dimensions, but capacity and storage figures vary by brand. Follow the device manual and the pack instructions.
Is this the same for OTC and prescription hearing aids?
Battery size follows the device, not how it was sold. See OTC vs prescription hearing aids and telecoil for other device differences.
Sources
- Renata SA, Hearing Aid Battery Technical Data Sheets, Vers. 02, June 2015: ZA10/PR70 (https://static.rapidonline.com/pdf/12-8441_v1.pdf), ZA13/PR48 (https://static.rapidonline.com/pdf/12-8442_v1.pdf), ZA312/PR41 (https://static.rapidonline.com/pdf/12-8443_v1.pdf), ZA675/PR44 (https://static.rapidonline.com/pdf/12-8444_v1.pdf). Checked 2026-11-01.
- Rayovac / Energizer, XX-Treme Longlife Extra 312 Product Data Sheet S6600584, Issue C: https://www.123accu.nl/pdf/A1200018.pdf. Checked 2026-11-01.







