Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Short answer: a compressor-driven nebulizer goes together in one direction. The cup is assembled first, the mouthpiece or mask goes on the cup, and the tubing links the bottom of the cup to the compressor. Your own model’s instructions for use (IFU) decide the details, because parts differ between devices.
General product information only. This page does not give medical advice, medicine names or doses. Ask your doctor, pharmacist or respiratory therapist to show you how to use and clean your own nebulizer.
This guide is for someone who has a nebulizer in a box, or a replacement part in hand, and wants to know which piece joins which. It covers assembly and a connection check only. For what the parts are, see what a nebulizer is.
What you need
The NIH National Heart, Lung, and Blood Institute (NHLBI) patient sheet How to Use a Nebulizer (NIH Pub. No. 21-HL-8163, October 2021) names the pieces to put together: the nebulizer machine, tubing, medicine cup, and a mouthpiece or mask.
- Compressor (the machine). It supplies the air. Denver Health’s patient sheet says to place it on a flat, dust-free surface and plug it into an outlet. See nebulizer compressors.
- Tubing. It carries air from the machine to the cup. See nebulizer tubing.
- Nebulizer cup. It has a top and a base that twist together (Denver Health).
- Mouthpiece or mask. It attaches to the cup. See aerosol masks.
- Machine filter. Denver Health says it should be changed or cleaned regularly, as the manufacturer states. See nebulizer filters.
Mask or mouthpiece
The cup takes either a mouthpiece or a mask. A mouthpiece needs lips closed to form a tight seal (NHLBI). A mask must fit snugly and cover the nose and mouth (NHLBI).
Steps to put a nebulizer together
How to put a nebulizer together, in order
- Wash your hands well (NHLBI, step 1).
- Put the machine on a flat, dust-free surface and plug it in (Denver Health).
- Put the cup together by twisting the top onto the base (Denver Health).
- Attach the mouthpiece or the mask to the cup (Denver Health).
- Connect the tubing to the machine, then to the bottom of the cup (Denver Health).
- Check the connections against the picture in your IFU. NHLBI and Children’s Hospital of Pittsburgh both say to put the parts together as the manufacturer’s instructions show.
The Children’s Hospital of Pittsburgh describes the same chain: one end of the tubing on the cup, the other end on the compressor.
The mist check
NHLBI says that when the machine is on you should see a light mist coming from the back of the tube opposite the mouthpiece, or from the mask. Denver Health describes a fine mist from the mouthpiece or mask. A mist at that point shows that the parts are joined and air is flowing.
Position during use
Children’s Hospital of Pittsburgh says the mask must cover the nose and mouth and that the nebulizer cup must be held straight up and down.
What can go wrong
- No mist. Recheck each joint against your IFU. Children’s Hospital of Pittsburgh says to check the compressor filter regularly and replace it when it gets dirty, and Denver Health says to change or clean it as the manufacturer states. If the mist still does not appear, follow the troubleshooting section of the IFU.
- Mask or mouthpiece leaks. A mask held away from the face does not meet the fit rule. Denver Health says to fit it tightly and not hold it away.
- Washing the tubing. NHLBI says not to wash the tubing, and not to boil it. It says to wash the cup and mouthpiece or mask with warm water and mild soap after each treatment, rinse, shake off, and air dry on a paper towel.
- Sharing parts. Children’s Hospital of Pittsburgh says nebulizers should not be shared. NHLBI says that if more than one person uses a machine, each person gets a separate labelled bag for their cup, mouthpiece or mask, and tubing, stored clean and dry.
- Weekly disinfecting. NHLBI says to follow the instructions that come with your device. Denver Health gives its own vinegar and warm water soak; that is one hospital’s instruction, and your IFU takes precedence.
When to get professional help
NHLBI recommends asking a doctor, pharmacist or respiratory therapist to show you how to use and clean the nebulizer. Do so if the parts in your box do not match your instructions, if you are unsure which medicine cup or mask belongs with your machine, or if you are setting up equipment for a child. Questions about what goes in the cup belong with the prescriber, not this page. For the wider equipment family, see respiratory therapy equipment.
FAQ
How do I put a nebulizer together?
Twist the cup top onto the base, attach the mouthpiece or mask to the cup, then run the tubing from the machine to the bottom of the cup. Follow your device’s IFU for the exact parts.
How do I put nebulizer tubing on?
Denver Health says to connect the tubing to the machine first and then to the bottom of the nebulizer cup.
How do I set up a nebulizer?
Wash your hands, put the machine on a flat, dust-free surface, plug it in, assemble the cup, mouthpiece or mask, and tubing as above, and look for the light mist when you switch on.
Can I put together a nebulizer from different brands?
NHLBI and Children’s Hospital of Pittsburgh both say to put the parts together as the manufacturer’s instructions show, so check your IFU before mixing parts from different makers.
Sources
- NIH NHLBI, How to Use a Nebulizer, NIH Pub. No. 21-HL-8163, October 2021. https://www.nhlbi.nih.gov/sites/default/files/publications/How-to-Use-a-Nebulizer-21-HL-8163.pdf (checked 2026-11-01).
- Denver Health, How to Use a Nebulizer patient sheet. https://denverhealth.org/-/media/pdfs/child-asthma-conditions-page/nebulizer-english.pdf (checked 2026-11-01).
- Children’s Hospital of Pittsburgh of UPMC, Nebulizer with mask. https://www.chp.edu/our-services/pulmonology/services/asthma/patient-procedures/nebulizer-with-mask (checked 2026-11-01).







