Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
If you buy laboratory or medical supplies and need competing quotes you can actually compare, the way to write a request for quote (RFQ) is to state the need, the basis on which you will decide, and the format you want answers in, then keep a file that shows how you decided. This guide walks through that drafting workflow. It does not repeat what an RFQ is: see Request for Quote for Medical Supplies for the definition and where an RFQ fits, and RFP vs RFQ if you are unsure which document you need.
The rules quoted below are the federal ones (FAR Part 13 for federal agencies and 2 CFR 200.320 for organisations spending federal awards). A private laboratory or hospital follows its own purchasing policy; use these as a reference point, not as a requirement that applies to you.
What you need
- A written statement of what you are buying. Quantity, item description and any specification you will hold suppliers to, so every supplier prices the same thing.
- Your award basis. How you will choose between quotes (for example lowest price among compliant quotes, or a stated mix of price and other factors). Federal rules require the buyer to tell quoters the basis on which award will be made (FAR 13.106-1(a)(2)).
- A supplier list and the reason for it. Who you will ask and why. Under 2 CFR 200.320(a)(2), price or rate quotations must be obtained from an adequate number of qualified sources, and the entity may use judgment in deciding what number is adequate.
- Your own purchasing policy and threshold. Whether the purchase sits at or below the simplified acquisition threshold changes how formal the solicitation has to be under federal rules, and an organisation’s own policy may set different limits.
- A place to keep records. Decide before sending where notes, quotes and the decision will be filed.
Steps
- Define the need. Write what is required, how many, and any urgency. FAR 13.106-1 has the contracting officer consider factors such as market competitiveness, urgency and dollar value before requesting quotes, and those are sensible prompts for any buyer.
- Decide how many suppliers to ask, and why. Federal rules allow soliciting a single source at or below the simplified acquisition threshold only when one source is reasonably available (for example because of urgency or exclusive licensing). Otherwise ask enough qualified suppliers that a comparison is meaningful. If your funds come from a federal award, see 2 CFR 200 procurement standards.
- Write the specification so quotes are comparable. Put the same item description, quantity and delivery location in front of every supplier, and ask for prices in a common layout. A table is the simplest way to do this (see the field table below).
- State the award basis. Say plainly how quotes will be evaluated. Federal rules require quotations to be evaluated on the basis established in the solicitation (FAR 13.106-2(a)(2)), so a factor you did not state is not one you can fairly decide on. The solicitation is not required to state the relative importance of each evaluation factor.
- Set the response format and ask for the documents you need. Give a deadline, a single point of contact and a submission method. List any supplier documents you want returned with the quote; which documents are appropriate is a decision for your own policy.
- Choose the form of solicitation. At or below the simplified acquisition threshold, federal rules call for oral solicitation to the maximum extent practicable when it is more efficient; this may not be practicable for actions exceeding $25,000. A written solicitation is called for when a likely-over-$25,000 action cannot economically or practicably be handled electronically or orally, and is required for construction requirements exceeding $2,000 (FAR 13.106-1).
- Evaluate every quote on the stated basis. Federal rules require evaluation in an impartial manner, including transportation charges, and that all quotations or offers be considered (FAR 13.106-2(a)). Buyers have broad discretion in the evaluation procedure, and formal evaluation plans, competitive ranges, discussions and scoring are not required.
- Record the decision. The price must be fair and reasonable, and wherever possible price reasonableness should rest on competitive quotations (FAR 13.106-3). If only one response arrives, the file needs a statement of why the price is reasonable. Records can be kept to a minimum: for written solicitations at or below the threshold, notes or abstracts covering prices, delivery, price lists used and suppliers contacted; for oral solicitations, the suppliers contacted and the prices and terms quoted. A single-source purchase or a non-price award needs the file to explain why. Related reading on price reasonableness: independent government cost estimates.
How to write an RFQ: what to put in each field
| RFQ field | What to put there | Source basis |
|---|---|---|
| Need and quantity | The written description of what is required and how many | FAR 13.106-1 (factors considered before requesting quotes) |
| Award basis | How quotes will be judged | FAR 13.106-1(a)(2); 13.106-2(a)(2) |
| Invited suppliers | Who you asked, and why that number is adequate | 2 CFR 200.320(a)(2); FAR 13.106-3 file contents |
| Delivery and transport | Where the goods go, so transportation charges can be included in the comparison | FAR 13.106-2(a)(1) |
| Price and delivery response | The prices and delivery terms you want quoted, in one common layout | FAR 13.106-3 (prices and delivery recorded) |
For the choice between an RFI, an RFP and an RFQ in a purchasing setting, see RFI vs RFP vs RFQ for hospital supply purchasing.
What can go wrong
- The basis for the decision was never stated. Because quotes are to be evaluated on the basis established in the solicitation, an unstated preference is a weak ground for an award.
- Quotes that cannot be compared. If suppliers priced different quantities, items or delivery terms, the comparison does not support a price-reasonableness finding.
- Only one quote comes back. The file then needs a price-reasonableness statement, and a single-source purchase needs the file to explain the lack of competition.
- Too few suppliers asked. For grant-funded purchases using simplified acquisition procedures, quotations come from an adequate number of qualified sources, with the number left to the entity’s judgment.
- Thin records. Notes of prices, delivery, price lists used and suppliers contacted are what show later how the choice was made.
When to get professional help
Ask your procurement office, or the grants or contracts office that administers the funds, before sending an RFQ when the purchase is paid from a federal or other restricted award, when it is near a purchasing threshold, when only one supplier seems available, or when the contract would be a construction requirement. They can tell you which rules and thresholds apply to your organisation. This page is general information, not legal or compliance advice.
FAQ
How do I handle how to write a request for quote?
Define the need, decide who to ask and why, write the specification so every supplier prices the same thing, state the award basis, set the response format, evaluate every quote on the stated basis, and record the decision. The numbered steps above follow that order.
What documents do I need?
You need your written description of the need, your stated award basis, the list of suppliers asked, and a file for the quotes and the decision. Under FAR 13.106-3 the file for a written solicitation at or below the threshold can be notes or abstracts covering prices, delivery, price lists used and suppliers contacted. Which documents to ask suppliers to return is set by your own purchasing policy.
How long does it take?
The federal rules quoted here set no standard duration. It depends on your organisation’s purchasing policy and on the response deadline you give suppliers.
What are the common reasons for rejection or delay?
The mechanisms these rules point to are an award basis that was not stated, quotes that are not comparable, a single response with no price-reasonableness statement, and too few qualified sources asked. A quote can only be judged on the basis you set out, so state it first.
Sources
- FAR 13.106-1, Soliciting competition. Cornell Legal Information Institute, https://www.law.cornell.edu/cfr/text/48/13.106-1. Checked 2026-11-03.
- FAR 13.106-2, Evaluation of quotations or offers. https://www.law.cornell.edu/cfr/text/48/13.106-2. Checked 2026-11-03.
- FAR 13.106-3, Award and documentation. https://www.law.cornell.edu/cfr/text/48/13.106-3. Checked 2026-11-03.
- 2 CFR 200.320, Procurement methods. https://www.law.cornell.edu/cfr/text/2/200.320. Checked 2026-11-03.







