Skip to main content
v2026.11,986 entries · CC-BY 4.0

IEEE Format in LaTeX: IEEEtran Setup and Bibliography

IEEE format in LaTeX: pick the right IEEEtran class line, start from a compiling skeleton, and set up citations and the bibliography.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

This guide is for authors who have been told to submit in IEEE format and are working in LaTeX: it shows which IEEEtran class line to use for your paper type, a skeleton that compiles, and the bibliography and submission rules in the class documentation. Everything below comes from the IEEEtran HOWTO (version 1.8b and later) and the CTAN package page, read 2026-11-12.

What IEEE format in LaTeX is used for in research

IEEE format in LaTeX means typesetting a paper with the IEEEtran document class. The CTAN package page describes it as “a document class for IEEE Transactions journals and conferences” whose BibTeX style “helps authors produce IEEE-formatted output.” The HOWTO states that one class can produce conference, journal and technical note (correspondence) papers, depending on class options. IEEE’s conference Author Center says to use its conference templates “in Word or LaTeX” to format a paper for publication. For the reference list itself, see IEEE reference format; for index terms, see IEEE keywords.

Install or access IEEEtran

  • CTAN package ieeetran: ctan.org/pkg/ieeetran. Listed version 1.8b, copyright 2001-2015 Michael Shell, LaTeX Project Public License 1.3.
  • Zip download: mirrors.ctan.org/macros/latex/contrib/IEEEtran.zip, which also carries the README and the HOWTO.
  • The package is also available in TeX Live and MiKTeX as ieeetran.
  • Overleaf: the IEEE Author Center states that Overleaf is preloaded with IEEE templates.

Step by step: set up an IEEE paper in LaTeX

1. Choose the document class line for your paper type

Paper type Class line or option What the HOWTO says
Conference \documentclass[conference]{IEEEtran} Conference mode is one of the five modes: conference, journal, technote, peerreview, peerreviewca.
Journal \documentclass[journal]{IEEEtran} Journal papers also have an IEEEkeywords environment.
Technical note or correspondence \documentclass[9pt,technote]{IEEEtran} Used with correspondence, brief and technote papers; technote uses 9pt.
Anonymous peer review peerreview or peerreviewca Journal-like with a single-column cover page; peerreviewca allows a conference-style author block. Requires \IEEEpeerreviewmaketitle after \maketitle.
Society formats comsoc, compsoc, transmag Mutually exclusive, none on by default. Do not use comsoc with conference papers.

Font size options are 9pt, 10pt, 11pt and 12pt; 10pt is used by the vast majority of papers. Draft options are draft, draftcls, draftclsnofoot and final.

2. Start from a skeleton

The package ships template files such as bare_conf.tex, bare_jrnl.tex, bare_jrnl_comsoc.tex, bare_conf_compsoc.tex and bare_jrnl_compsoc.tex. A minimal conference skeleton following the HOWTO:

\documentclass[conference]{IEEEtran}
\usepackage{cite}
\begin{document}
\title{Your Paper Title}
\author{\IEEEauthorblockN{First Author}
\IEEEauthorblockA{Department, Institution\\City, Country\\email}
\and
\IEEEauthorblockN{Second Author}
\IEEEauthorblockA{Department, Institution\\City, Country\\email}}
\maketitle
\begin{abstract}
Abstract text without math, special symbols or citations.
\end{abstract}
\section{Introduction}
Text with a citation~\cite{key1,key2}.
\section*{Acknowledgment}
Thanks.
\bibliographystyle{IEEEtran}
\bibliography{IEEEabrv,mybibfile}
\end{document}

For a journal paper, change the class option to journal, add \begin{IEEEkeywords}...\end{IEEEkeywords} after the abstract, and use the journal author block. For compsoc and transmag journals, place \IEEEtitleabstractindextext before \maketitle. With the compsoc option the acknowledgments heading is “Acknowledgments”.

3. Set up the author block

Conference papers use \author{\IEEEauthorblockN{...}\IEEEauthorblockA{...}\and ...}. The HOWTO prefers the multicolumn layout for three or fewer affiliations and a long format with \IEEEauthorrefmark for more.

4. Abstract and keywords

The HOWTO says math, special symbols and citations should generally not be used in abstracts, and journal and technote papers use the IEEEkeywords environment, again without math or special symbols.

5. Citations and bibliography

Load cite.sty so that adjacent numbers are sorted and compressed in IEEE style, and put multiple citations in one command, \cite{a,b}. For compsoc, which sorts but does not compress, the HOWTO gives:

\ifCLASSOPTIONcompsoc
\usepackage[nocompress]{cite}
\else
\usepackage{cite}
\fi

This requires cite version 4.0 or later. Use \bibliographystyle{IEEEtran} followed by \bibliography{IEEEabrv,mybibfile}. For a general comparison of styles, see LaTeX bibliography styles explained.

Output and how to read it

At compile time the class displays its version on the console; the HOWTO applies to version 1.8b and later. Compile, run BibTeX, then compile again until citations and the reference list resolve. Check that the title block, abstract, keywords (journal and technote only) and numbered references appear in the layout of the mode you chose.

Troubleshooting

  • Wrong layout for the venue. Check the class option against the table above; conference, journal and technote are different modes of the same class.
  • Peer-review cover page missing the title. In peerreview mode add \IEEEpeerreviewmaketitle after \maketitle.
  • Citation numbers not compressed. Load cite; for compsoc use the nocompress snippet above.
  • Sending the source to an outside party. The HOWTO says to copy the contents of your .bbl file into the document as a thebibliography environment.
  • Doing too much. Appendix D of the HOWTO says many user mistakes with IEEEtran involve doing too much rather than too little: do not load packages out of habit, do not manually adjust spacing, margins or paper size, and do not put labels before captions.

Free alternatives

Route What the source says
IEEEtran from CTAN, TeX Live or MiKTeX Free to use under LPPL 1.3 (CTAN).
Overleaf IEEE templates IEEE Author Center: Overleaf is preloaded with IEEE templates.
IEEE Word template IEEE Author Center: conference templates are offered in Word or LaTeX.

FAQ

How do I use IEEE format in LaTeX?

Use \documentclass[conference]{IEEEtran} (or journal or technote), \usepackage{cite}, and \bibliographystyle{IEEEtran}, as set out above.

Which IEEEtran version does the HOWTO cover?

Version 1.8b and later, which is the version listed on CTAN.

Do I need to use the template files?

The package ships bare_*.tex templates for each mode; the HOWTO advises keeping customisation to a minimum.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about IEEE Format in LaTeX: IEEEtran Setup and Bibliography

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →