Written and maintained by CASRAI Editorial Board
Published
On this page
iPSC cell culture is the routine maintenance of induced pluripotent stem cells in the lab: growing them on a defined matrix in pluripotency-supporting medium, feeding them on a schedule, and passaging them as colonies grow dense. In current practice this is usually done feeder-free, in a chemically defined medium such as Essential 8 (E8), and increasingly with EDTA rather than enzymes to split the cells.
Definition and scope
This page covers maintenance of established human iPSC lines: the medium, the surface the cells sit on, the passaging method and the genomic monitoring that should accompany a long culture. It does not cover reprogramming or differentiation; for what iPSCs are and how they are derived, see the induced pluripotent stem cells guide. For the general mechanics of growing adherent lines, see mammalian cell culture.
The field has moved in three steps, as described in the Nature Protocols paper by Beers and colleagues (2012): from feeder-dependent culture, to feeder-free culture, to defined medium on a defined extracellular matrix. The point of that progression is control: each undefined component removed (feeder cells, serum-containing or animal-derived additions) is one fewer source of batch variation.
How feeder-free iPSC culture is maintained in practice
iPSC media
Essential 8 is described by its developers as a xeno-free, chemically defined medium built from eight essential factors. Beers and colleagues used E8 and other feeder-free media, including TeSR, across more than 50 embryonic and induced pluripotent stem cell lines. The related term is covered in the xeno-free media entry, and the wider families of formulations are compared in types of cell culture media.
Thermo Fisher’s published protocol for culturing pluripotent stem cells in Essential 8 states that the complete medium is stored at 2 to 8 degrees C for up to two weeks, and that it should be brought up at room temperature: the protocol specifically says not to warm the medium at 37 degrees C. The same protocol has cells fed the day after splitting and then daily.
Matrices: what the cells sit on
In that protocol the surfaces named are recombinant vitronectin (VTN-N, typically used at 0.5 µg/cm²) and Geltrex LDEV-Free, hESC-qualified matrix. Beers and colleagues report that cells survived on Matrigel, vitronectin and synthetic surfaces, independent of ROCK inhibitors, under EDTA passaging in E8.
When to passage
The Thermo protocol has cultures split at about 85% confluence, usually every four days, and also earlier when colonies become too dense or too large, or when differentiation increases. These are manufacturer protocol values for one medium and matrix pairing, not universal rules; lines differ.
iPSC passaging methods compared
Passaging detaches colonies and re-plates them at lower density. The methods differ mainly in what they produce (aggregates or single cells) and what that costs the cells. The data table below sets out each approach with the trade-off its source states.
Aggregate methods: collagenase, Dispase and mechanical scraping
Beers and colleagues describe the conventional approaches as passaging aggregates with collagenase (on feeder layers) or Dispase (in feeder-free culture), or by mechanical scraping. These keep cells in clumps, where cell-cell adhesion supports survival.
Single-cell methods: TrypLE and Accutase
Reagents such as TrypLE or Accutase individualise the cells. The same paper notes that poor survival of individualised cells often leads to abnormal karyotypes, and that ROCK inhibitors are used to boost survival. The proposed mechanism for the death of single human pluripotent cells is myosin-actin contraction; keeping cell-cell contact is protective.
EDTA: enzyme-free passaging
The EDTA method in the 2012 protocol uses chemically defined E8 medium and needs no enzyme neutralisation, centrifugation or drug treatment. Small aggregates produced by EDTA survived as well as Dispase-treated cells. The authors report that one six-well or 10 cm plate could be passaged in roughly 6 to 7 minutes, that normal karyotypes were maintained, and that the longest iPSC culture ran for more than 51 passages and more than six months.
Compatibility matters here. Thermo Fisher’s E8 protocol uses Versene or 0.5 mM EDTA in DPBS as the passaging reagent and says collagenase and Dispase do not work well in E8 on vitronectin. A reagent chosen for one culture system should not be assumed to transfer to another.
Genomic monitoring across passages
The ISSCR Standards for Human Stem Cell Use in Research (2023, with a December 2023 update) state that stem cells are subject to the acquisition of genetic changes in culture. Recurrent changes include gains of chromosomes or chromosome parts 1, 12, 17, 20 and X, and single-nucleotide variants in TP53. The standards add that variants with a growth advantage can take over a culture within about 5 to 10 passages.
Two recommendations turn this into a checklist. Recommendation 3.2.1 says master and working cell banks should be evaluated to determine their genetic status, ideally after cloning or gene editing and after assessment. Recommendation 3.2.2 says monitoring for genetic changes should ideally cover the timespan of experiments. The standard’s timing for that monitoring:
- before experiments begin;
- during long cultures, roughly every 10 passages;
- after bottlenecks such as single-cell cloning;
- whenever growth or differentiation behaviour changes.
The peer-reviewed version is Ludwig and colleagues in Stem Cell Reports 18(9):1744-1752 (2023). It means passage number is a tracked quantity, not a footnote: record it for every vial, plate and bank.
A checklist for reading any iPSC culture protocol
The sources above support a short set of questions to ask of a protocol before adopting it. These are our synthesis of the cited material, not a published standard.
- Which medium and matrix pair was it validated on? The E8 on vitronectin protocol and the 2012 EDTA method were both written for defined conditions; a different pair is a different system.
- What passaging reagent does it name, and does it say what does not work? The Thermo protocol states that collagenase and Dispase do not work well in E8 on vitronectin.
- Does it produce aggregates or single cells? Single cells bring the survival and karyotype caveat and the ROCK inhibitor dependency described in the 2012 paper.
- What are the medium storage and warming rules? Two weeks refrigerated, room-temperature warming, per the E8 protocol.
- Is passage number recorded, and is there a genomic check planned? ISSCR 3.2.1 and 3.2.2 expect banks to be evaluated and monitoring to span the experiments.
Where it matters for lab and supply decisions
Each protocol fixes a combination of medium, matrix and passaging reagent, and the sources show these are linked rather than interchangeable: the E8 on vitronectin protocol names EDTA-based reagents and warns against collagenase and Dispase, while the 2012 paper’s EDTA method was validated in chemically defined conditions. A lab changing one component (a new matrix lot, a different medium) is in effect changing the whole system and has a reason to re-check colony morphology and, under the ISSCR standard, genomic status. Storage rules also affect consumables: complete E8 keeps for up to two weeks refrigerated per the manufacturer protocol, so quantities prepared should match use.
Common misunderstandings
- “Feeder-free means undefined-free.” Matrigel is a feeder-free surface but a complex extract; defined vitronectin or synthetic surfaces were also used successfully in the 2012 work.
- “Single cells are always better.” Single-cell passaging is convenient, but the cited paper links poor survival after individualisation with abnormal karyotypes and the need for ROCK inhibitors.
- “A normal karyotype once means normal forever.” ISSCR states that genetic changes can be acquired in culture, so monitoring is repeated, not one-off.
- “Warm medium at 37 degrees C like any other.” The E8 protocol says not to.
Frequently asked questions
What is iPSC culture?
It is the maintenance of induced pluripotent stem cells in an undifferentiated state through defined medium, a suitable surface, regular feeding and passaging. The cells are checked for genomic changes as passage number rises.
What media are used for iPSCs?
Published work names chemically defined feeder-free media such as Essential 8 and TeSR. Beers and colleagues used both across more than 50 lines.
How are iPSCs passaged?
By aggregates (collagenase, Dispase, scraping), by single cells (TrypLE or Accutase, usually with a ROCK inhibitor), or enzyme-free with EDTA. The data table below gives the trade-off each source states.
How often should iPSCs be checked for genetic changes?
ISSCR recommends monitoring before and after experiments and during long cultures, roughly every 10 passages, plus after bottlenecks and when behaviour changes.
Sources
- Beers J et al. Passaging and colony expansion of human pluripotent stem cells by enzyme-free dissociation in chemically defined culture conditions. Nature Protocols 2012;7(11):2029-2040. doi.org/10.1038/nprot.2012.130 (read 2026-11-14).
- ISSCR. Standards for Human Stem Cell Use in Research, Section 3 Genomic Characterization (2023, December 2023 update). isscr.org (read 2026-11-14).
- Ludwig TE et al. ISSCR standards for human stem cell use in research. Stem Cell Reports 2023;18(9):1744-1752.
- Thermo Fisher Scientific. Culturing Pluripotent Stem Cells (PSCs) in Essential 8 Medium (protocol page). thermofisher.com (read 2026-11-14).
Data: iPSC passaging approaches and the trade-offs their sources state
Compares passaging approaches for human pluripotent stem cell culture by the cell format produced and the property or caveat stated in the cited protocol paper, manufacturer protocol or standard.
| Passaging approach | Cells produced | Context stated in source | Stated property or caveat |
|---|---|---|---|
| EDTA (enzyme-free) | Small aggregates | Chemically defined E8 medium; Matrigel, vitronectin or synthetic surfaces | No enzyme neutralisation, centrifugation or drug treatment; survival comparable to Dispase-treated aggregates; normal karyotypes maintained |
| Collagenase | Aggregates | Conventional method on feeder layers | Conventional aggregate method; reported as not working well in E8 on vitronectin |
| Dispase | Aggregates | Conventional method in feeder-free culture | Conventional aggregate method; reported as not working well in E8 on vitronectin |
| Mechanical scraping | Aggregates | Listed among conventional methods | Listed as a conventional alternative to enzymatic aggregate passaging |
| TrypLE or Accutase | Single cells | Individualisation of cells | Poor survival often leads to abnormal karyotypes; ROCK inhibitors used to boost survival |
Sources
- Beers et al., Nature Protocols 2012;7(11):2029-2040 (accessed 2026-11-14)
- Thermo Fisher: Culturing Pluripotent Stem Cells in Essential 8 Medium (accessed 2026-11-14)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







