Written and maintained by CASRAI Editorial Board
Published
On this page
Short answer: an iris diaphragm is an adjustable ring of overlapping blades that opens and closes to change the size of an opening in the light path. A microscope using Köhler illumination has two: the aperture iris diaphragm, which controls the angle of the light striking the specimen, and the field iris diaphragm, which controls the area of the specimen that is lit. Closing the aperture iris raises contrast but, if overdone, sharply reduces resolution.
This page is general equipment information for researchers and laboratory staff, drawn from manufacturer and instrument-facility guidance. Follow your own microscope’s manual for its specific adjustment procedure.
Definition and scope
An iris diaphragm works like the iris of an eye: thin blades move to make a central opening larger or smaller. In Köhler illumination two such diaphragms sit at different places in the light path and do different jobs. They are often confused with each other and with the condenser itself. For the condenser lens system and its role, see our guide to the use of the condenser in a microscope.
What is the purpose of the aperture in a microscope?
The aperture iris diaphragm controls the angle of light striking the specimen (Evident Scientific, microscope anatomy knowledge hub). Scientifica’s Köhler illumination primer words it as controlling the angular aperture of the cone of light from the condenser. It does not choose which part of the specimen is lit; it sets how wide the illuminating cone is, which trades contrast against resolution.
What happens when you change the setting of the diaphragm?
Aperture iris
Closing the aperture iris raises contrast. Scientifica cautions against closing it too far, because resolution is then drastically reduced. Evident Scientific describes the setting as a compromise between maximising image contrast and avoiding artefacts, and notes that highly reflective specimens in reflected-light work need a smaller aperture to reduce glare and enhance contrast.
Field iris
The field iris diaphragm controls the area of the circle of light illuminating the specimen (Scientifica). It is set just outside the field of view and is readjusted when the magnification changes. Evident describes it as conjugate (pre-focused) with the focused specimen.
Aperture iris versus field iris
| Question | Aperture iris diaphragm | Field iris diaphragm |
|---|---|---|
| What it controls | The angle of light striking the specimen (the angular aperture of the cone of light from the condenser) | The area of the circle of light illuminating the specimen |
| Main effect of changing it | Contrast versus resolution | Size of the illuminated region |
| Relationship to the specimen | Sets the illuminating cone | Conjugate (pre-focused) with the focused specimen |
| Typical working setting | Heuristics below; no single rule | Just outside the field of view |
| Readjust when | Contrast and resolution needs change | Magnification changes |
Sources: Evident Scientific, reflected-light Köhler page; Scientifica, “Köhler illumination: what, why and how” (both read 2026-11-07).
Where to set the aperture iris: heuristics, not a single rule
Scientifica gives two related rules of thumb: the iris should occupy the outer 20% or so of the field when the condenser is viewed, or the condenser numerical aperture should be about 20% below the objective’s numerical aperture (for example about 0.5 for a 0.65 NA objective). Other instrument guides suggest different fractions of full opening, so treat any single number as a starting point and judge the result on your specimen. Our guide to Köhler illumination alignment covers the full alignment sequence, and the optical microscopy resolution limit explains why closing the aperture costs resolution.
Common misunderstandings
- It is not mainly a brightness control. Evident and Scientifica both describe the aperture iris in terms of illuminating angle, contrast and resolution, not brightness.
- It is not the condenser. The condenser is the lens system delivering light to the specimen; the aperture iris limits the cone of light from it.
- There are two irises, not one. The field iris is a separate diaphragm with a separate job; adjusting one does not substitute for the other.
- Reflected-light microscopes have them too. Evident’s reflected-light Köhler page covers both the aperture and field iris diaphragms.
Where it matters for labs
Contrast and resolution depend on the aperture iris, and the illuminated area depends on the field iris, so two users who set them differently can record different-looking images from the same slide. Agreeing on a documented starting setting per objective, and rechecking the field iris whenever magnification changes, keeps images comparable. For the wider optical system, see compound microscope optics.
FAQ
What is the iris diaphragm of a microscope?
An adjustable set of blades that changes the size of an opening in the light path. With Köhler illumination there is an aperture iris, which sets the angle of the light striking the specimen, and a field iris, which sets the illuminated area.
What happens when you change the setting of the diaphragm?
Closing the aperture iris raises contrast and lowers resolution; closing it too far reduces resolution drastically. The field iris sets the lit circle and is set just outside the field of view.
What is the purpose of the aperture in a microscope?
It controls the angular aperture of the illuminating cone, balancing contrast against resolution and, in reflected light, reducing glare on reflective specimens.
Is the iris diaphragm the same as the condenser?
No. The condenser delivers light to the specimen; the aperture iris limits the cone of light it delivers.
Sources
- Evident Scientific, Reflected light Köhler illumination (microscope anatomy knowledge hub), read 2026-11-07.
- Scientifica, Köhler illumination: what, why and how, read 2026-11-07.







