Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Short answer: ISO 14698 is the withdrawn two-part series on biocontamination control in cleanrooms. As of 1 November 2026, the Swedish Standards Institute lists the European-adopted Part 1 as replaced by EN 17141:2020 (status Valid), and the Estonian standards body lists ISO 14698-1:2003 and ISO 14698-2:2003 as withdrawn from 16 March 2026. Cite EN 17141 for current work, not ISO 14698.
This page is general standards information for lab, cleanroom and quality staff. It is not regulatory or clinical advice, and it does not reproduce the standards, which are sold by standards bodies.
What ISO 14698 covered
The series was titled “Cleanrooms and associated controlled environments – Biocontamination control”. It had two parts, both published in 2003:
- ISO 14698-1:2003 – principles and basic methodology. The Estonian Centre for Standardisation describes it as setting out the principles and basic method for a formal biocontamination control system, including consistent monitoring of risk zones and control measures suited to each level of risk. It can also be used for information in low-risk zones.
- ISO 14698-2:2003 – evaluation and interpretation of biocontamination data.
Part 1 did not set application-specific requirements; the catalogue summaries describe it as a general framework for a risk-zone based control system.
Is ISO 14698 still current? Status and replacement
| Document | Status in the catalogue | Catalogue and date checked |
|---|---|---|
| SS-EN ISO 14698-1 (European-adopted Part 1) | Withdrawn; replaced by SS-EN 17141:2020 | Swedish Standards Institute (SIS), checked 2026-11-01 |
| ISO 14698-1:2003 | Withdrawn, 16 March 2026 | Estonian Centre for Standardisation (EVS), checked 2026-11-01 |
| ISO 14698-2:2003 | Withdrawn, 16 March 2026 | EVS, checked 2026-11-01 |
| EN 17141:2020 | Valid; approved 18 August 2020; replaces SS-EN ISO 14698-1 and -2 | SIS, checked 2026-11-01 |
National catalogues can show different withdrawal dates for the ISO edition and the European-adopted edition, so the table states each row with its own source. EVS names no replacement for the ISO documents; SIS names EN 17141 as the replacement for the European-adopted versions.
What EN 17141 covers
EN 17141:2020 is catalogued under ICS 13.040.35, cleanrooms and associated controlled environments. SIS quotes its scope as establishing “the requirements, recommendations and methodology for microbiological contamination control” and setting out “the requirements for establishing and demonstrating microbiological control”.
Old versus new scope
| Point | ISO 14698-1/-2 (2003) | EN 17141:2020 |
|---|---|---|
| Framing | Principles and basic methodology; data evaluation in a separate Part 2 | Requirements, recommendations and methodology for microbiological contamination control, including demonstrating control |
| Contamination type | Biocontamination (as titled) | Limited to viable microbiological contamination; excludes endotoxin, prion and viral contamination |
| Applications | No application-specific requirements | Specific guidance on common applications, including pharmaceutical and biopharmaceutical, medical devices, hospitals and food |
Sources: SIS and EVS catalogue pages above, checked 2026-11-01.
Where it matters for labs and clinics
Older SOPs, quality manuals, audit checklists and supplier documents may still cite “ISO 14698”. A short checklist built only from the facts above:
- Find every document that cites ISO 14698-1 or -2 and note the edition year cited.
- Check the current status of the cited document in your national standards body’s catalogue, since withdrawal dates differ by catalogue.
- Where the document needs a microbiological contamination control reference, review EN 17141:2020 and decide, under your own quality system, whether to update the citation.
- Note that EN 17141 is limited to viable contamination; endotoxin, prion and viral contamination are outside its scope, so any program covering them needs its own references.
For monitoring practice in specific settings, see our guides on pharmaceutical environmental monitoring, laboratory environmental monitoring, USP 1116 on aseptic processing environments and EU GMP Annex 1. For particle classes, see ISO Class 5 and the overview of a clean room lab.
Common misunderstandings
- “ISO 14698 is the current biocontamination standard.” The catalogues above list it as withdrawn.
- “EN 17141 covers every contaminant.” Its scope is limited to viable microbiological contamination.
- “The withdrawal happened on one date everywhere.” The Estonian catalogue shows 16 March 2026 for the ISO documents, while the Swedish catalogue shows the European-adopted versions replaced by a 2020 standard.
FAQ
Is ISO 14698 still current?
No. ISO 14698-1:2003 and ISO 14698-2:2003 are listed as withdrawn by EVS (16 March 2026), and SIS lists the European-adopted Part 1 as replaced (checked 2026-11-01).
What replaced ISO 14698?
SIS lists EN 17141:2020 as replacing SS-EN ISO 14698-1 and -2. EVS names no replacement for the ISO documents themselves.
Does EN 17141 cover endotoxin or viruses?
No. SIS quotes its scope as limited to viable microbiological contamination and excluding endotoxin, prion and viral contamination.
Sources
- Swedish Standards Institute, SS-EN 17141:2020, catalogue page, checked 2026-11-01.
- Swedish Standards Institute, SS-EN ISO 14698-1, catalogue page, checked 2026-11-01.
- Estonian Centre for Standardisation, ISO 14698-1:2003 and -2:2003, catalogue page, checked 2026-11-01.







