Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop iso 15378 supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

ISO 15378: GMP Quality Management for Primary Packaging Materials

ISO 15378 applies ISO 9001:2015 with GMP to primary packaging materials for medicinal products. Scope, edition status and a supplier question checklist.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

Short answer

ISO 15378 is an international quality management standard for the makers of primary packaging materials for medicinal products. It applies ISO 9001:2015 and adds good manufacturing practice (GMP) requirements. The current edition is ISO 15378:2017, amended by ISO 15378:2017/Amd 1:2024. It is a standard that a supplier can be assessed against, not a law, and it does not replace the regulations that apply to the medicine or device itself.

This page is general reference information about a standard, not regulatory, legal or medical advice.

Definition and scope

The full title is “Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)”. The Swedish Institute for Standards (SIS) describes it as an application standard for the design, manufacture and supply of primary packaging materials for medicinal products.

Per the SIS catalogue entry, it specifies requirements for a quality management system where an organization:

  • needs to demonstrate that it can consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
  • aims to enhance customer satisfaction through effective application of the system, including processes for improvement.

The standard goes beyond ISO 9001 by specifying GMP requirements for primary packaging materials. The organization it addresses is the packaging supplier, not the manufacturer of the medicine.

How it is used in practice

The standard is written for an organization that supplies primary packaging materials and needs to show customers a documented, GMP-referenced quality system. The SIS entry notes one drafting convention that matters when reading any certificate or audit report: the phrase “if appropriate” appears several times in the text, and a requirement qualified that way is deemed appropriate unless the organization documents a justification otherwise. In other words, an exclusion is not silent; it should be justified in the supplier’s own documentation.

For the wider GMP picture, see CASRAI’s guides on 21 CFR 210/211 cGMP and GMP audit checklists. ISO 15378 is a different kind of document from those: a voluntary management system standard for packaging suppliers.

Edition history and amendment status

Item What the catalogue records show Source
ISO 15378:2017 Edition 4, approved 14 September 2017; replaces ISO 15378:2015; status valid SIS
ISO 15378:2017/Amd 1:2024 Amendment published 23 February 2024; listed as current BSI Knowledge
Responsible committee (BSI) CH/212 BSI Knowledge
ICS classification (BSI) 03.100.70 and 11.040.01 BSI Knowledge

A reference to “ISO 15378” with no edition is ambiguous. The unambiguous citation is “ISO 15378:2017 including Amd 1:2024”.

Document What it is Relationship to ISO 15378
ISO 9001:2015 General quality management system requirements ISO 15378 is a particular application of it, with reference to GMP
GMP Manufacturing quality practice for medicinal products ISO 15378 adds GMP requirements specific to primary packaging materials

Packaging for investigational medicines has its own rules; see clinical trial packaging. Medical device quality systems are a separate subject; see ISO 13485 and 21 CFR Part 820.

Where it matters for labs, clinics and supply decisions

Supplier qualification documents often ask whether a packaging supplier holds a quality certification. The following questions are an editorial checklist derived from the scope and “if appropriate” statements above. They are prompts for a conversation with a supplier, and a yes to any of them does not by itself prove product quality.

  1. Which edition is cited? Ask for “ISO 15378:2017” and whether Amd 1:2024 is included, since both are recorded as current.
  2. What is the scope of the certificate? The standard addresses the design, manufacture and supply of primary packaging materials. Check that the certified scope names the actual materials or sites in question.
  3. Who issued it? Note the issuing body and its validity dates as written on the certificate.
  4. Are “if appropriate” exclusions documented? The standard expects a documented justification when a qualified requirement is not applied.
  5. How are changes handled? Quality systems depend on controlled change; see change control in pharma for the general concept.

Common misunderstandings

“It is the same as ISO 9001.”

No. It applies ISO 9001:2015 and adds GMP-referenced requirements for primary packaging materials.

“It is a regulation.”

It is a published standard. The standard itself refers to meeting applicable statutory and regulatory requirements, which are set elsewhere.

“It covers the medicine or its labelling.”

Its stated subject is primary packaging materials for medicinal products and the organization that designs, makes and supplies them.

“The 2015 edition is still the reference.”

The 2017 edition replaces the 2015 edition, and the 2024 amendment amends the 2017 edition.

FAQ

What is ISO 15378?

A quality management standard for primary packaging materials for medicinal products, applying ISO 9001:2015 with reference to GMP.

What is the current version of ISO 15378?

ISO 15378:2017 (4th edition, approved 14 September 2017), amended by ISO 15378:2017/Amd 1:2024, published 23 February 2024.

Who is ISO 15378 for?

Organizations that design, manufacture and supply primary packaging materials for medicinal products and need to demonstrate a consistent quality system to customers.

What does “if appropriate” mean in the standard?

A requirement qualified by that phrase is deemed appropriate unless the organization documents a justification otherwise.

Sources

  • Swedish Institute for Standards (SIS), catalogue entry for ISO 15378:2017, sis.se, checked 1 November 2026.
  • BSI Knowledge, catalogue entry for ISO 15378:2017/Amd 1:2024, knowledge.bsigroup.com, checked 1 November 2026.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about ISO 15378: GMP Quality Management for Primary Packaging Materials

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →