Skip to main content
v2026.11,986 entries · CC-BY 4.0

Item in LaTeX: Bullet, Numbered and Description Lists

Use \item in itemize, enumerate and description lists, and change bullets, numbering, spacing and indent with the standard kernel or enumitem.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

Quick answer: in LaTeX, \item starts one entry inside a list environment. Put it between \begin{itemize} and \end{itemize} for bullets, \begin{enumerate} for numbers, or \begin{description} for term-and-explanation entries. \item belongs inside one of these list environments.

This guide is for researchers and analysts writing papers, theses and reports in LaTeX who need to produce a list, change its bullet or numbering style, remove or adjust spacing and indentation, or put a list inside a sentence. Each setting below is traced to the Overleaf lists documentation or the enumitem package manual, both read on 2026-11-07.

What \item does in research documents

Lists in a manuscript typically carry inclusion criteria, numbered hypotheses, protocol steps, contribution statements or glossary-style definitions. LaTeX provides three standard list environments, and each entry in each one is introduced by \item:

  • itemize: unnumbered, bulleted entries.
  • enumerate: automatically numbered entries. Numbering restarts at 1 in each new enumerate environment.
  • description: entries that begin with a term given as \item[Term] Explanation.

Install or access

itemize, enumerate and description are part of the standard LaTeX kernel, so a basic list needs no package. Customisation such as tighter spacing, margins and custom label formats is done with the enumitem package, loaded with \usepackage{enumitem} in the preamble. According to its CTAN page (read 2026-11-07), enumitem controls the layout of enumerate, itemize and description, is released under the MIT license, and was at version 3.11 dated 2025-02-06. Its manual is at mirrors.ctan.org/macros/latex/contrib/enumitem/enumitem.pdf. Overleaf projects can load it the same way, because Overleaf documents the package in its own lists tutorial.

Step-by-step: write the three basic lists

1. A bulleted list (itemize)

\begin{itemize}
  \item Participants aged 18 or over
  \item Complete baseline data
\end{itemize}

2. A numbered list (enumerate)

\begin{enumerate}
  \item State the hypothesis
  \item Register the analysis plan
\end{enumerate}

3. A description list

\begin{description}
  \item[Power] The probability of detecting a true effect.
  \item[Alpha] The significance threshold.
\end{description}

4. Nest lists

Lists can be nested and mixed, for example an enumerate inside an itemize. The bullet style or number format changes automatically at each level. The standard limit is a depth of four levels.

\begin{enumerate}
  \item Screening
  \begin{itemize}
    \item Eligibility check
    \item Consent
  \end{itemize}
  \item Baseline visit
\end{enumerate}

Task-to-code table: change bullets, numbers, spacing and indent

This table covers the related searches people make most often (bullet style, bullet symbol, numbers, spacing, indent, a bullet without itemize). Every row is taken from the Overleaf lists page or the enumitem manual, both read 2026-11-07.

What you want Code Source
Custom label for one entry \item[!] Text (the optional argument sets that entry’s label) Overleaf lists
Entry with no label \item[] Text Overleaf lists
Change the bullet for a nesting level \renewcommand{\labelitemi}{\textbullet} (\labelitemi to \labelitemiv are the four itemize levels) Overleaf lists
Change the number format for a level \renewcommand{\labelenumii}{\arabic{enumi}.\arabic{enumii}} (formats include \arabic, \roman, \Roman, \alph, \Alph) Overleaf lists
Set the label per list \begin{itemize}[label=\textbullet, leftmargin=*] (needs enumitem) enumitem manual
Numbers like i), ii), iii) \begin{enumerate}[label=\roman*), leftmargin=*] (needs enumitem) enumitem manual
Short enumerate-style labels Load \usepackage[shortlabels]{enumitem}, then \begin{enumerate}[i)]; A, a, I, i and 1 stand for the Alph, alph, Roman, roman and arabic formats enumitem manual
Remove space between items \begin{itemize}[noitemsep] removes the space between items and paragraphs; [nosep] removes all vertical spacing enumitem manual, Overleaf lists
Apply spacing to every list \setlist{nosep} in the preamble enumitem manual
Change the indent \begin{itemize}[leftmargin=30pt]; rightmargin works the same way. Without enumitem the underlying lengths are \leftmargin, \rightmargin, \labelwidth, \labelsep and \itemsep Overleaf lists
List inside a sentence (inline) Load \usepackage[inline]{enumitem} and use enumerate*, itemize* or description*; entries are joined with itemjoin (default a space) and itemjoin* before the last item enumitem manual
Define a new list type \newlist{name}{type}{max-depth} then \setlist[name]{...} Overleaf lists, enumitem manual

For the general rules on paragraph indentation and vertical or horizontal space outside lists, see the CASRAI guides on indentation in LaTeX and spacing in LaTeX.

Continue numbering across a break

By default an enumerate restarts at 1. In enumitem, the resume key continues the numbering of the previous list of the same environment name, and start sets an explicit first number (for example start=5). Use \begin{enumerate}[resume] for the continuation.

Output and how to read it

After compiling, itemize entries show a bullet whose symbol differs by nesting level, enumerate entries show 1., 2., … at the first level with a different format at each deeper level, and description entries show the term followed by its text. If an entry shows a literal label you did not intend, check whether you wrote text in square brackets directly after \item, because LaTeX reads that as the optional label argument.

Troubleshooting

  • \item used outside a list. Entries belong inside a list environment. Wrap the entries in itemize, enumerate or description.
  • Lists nested deeper than four levels. The standard limit is four levels. According to Overleaf’s lists page, deeper nesting with enumitem needs \setlistdepth{n}.
  • Option not recognised. Keys such as leftmargin, nosep and label in square brackets work only after \usepackage{enumitem} is loaded.
  • [i)]-style short labels fail. They need the shortlabels package option; without it use label=\roman*).
  • Inline environments are undefined. enumerate*, itemize* and description* exist after loading enumitem with the inline option.

Free alternatives

Option What it gives you Source
Standard LaTeX lists itemize, enumerate, description with \renewcommand label changes, no extra package Overleaf lists
enumitem package Key-value control of labels, margins, spacing, resuming, inline lists and new list types; MIT license CTAN, enumitem manual
\textbullet in running text A bullet character without a list environment; the manual uses it as a label value enumitem manual

FAQ

How do I change the bullet style in itemize?

Redefine the label for the nesting level, for example \renewcommand{\labelitemi}{\textbullet}, or use enumitem’s label= key on a single list.

How do I make a bullet point in LaTeX without itemize?

Use \textbullet in text. It is the same command the enumitem manual uses as a label value. For a true list, use itemize.

How do I get numbers like i), ii), iii)?

With enumitem, \begin{enumerate}[label=\roman*)]; with the shortlabels option, \begin{enumerate}[i)].

How do I reduce spacing in an itemize list?

Add noitemsep to remove space between items, or nosep to remove all vertical spacing. Set \setlist{nosep} in the preamble to apply it everywhere.

How do I change the indent of a list?

Use leftmargin (and rightmargin) in the optional argument, for example [leftmargin=30pt]. The setting needs enumitem.

Sources

Related CASRAI guides: LaTeX notes template and collaborative writing in LaTeX and Overleaf.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Item in LaTeX: Bullet, Numbered and Description Lists

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →