Skip to main content
v2026.11,986 entries · CC-BY 4.0

Journal of Technology and Science Education: JOTSE Guide

A JOTSE journal profile covering scope, double-blind review, indexing, author obligations and the 2026 manuscript requirements.

Written and maintained by CASRAI Editorial Board

Published

On this page

The Journal of Technology and Science Education (JOTSE) is an open-access journal published by OmniaScience, focused on teaching and learning in science, technology and engineering. Its online ISSN is 2013-6374. For prospective authors, the key preparation issue is the journal’s 2026 update: the new manuscript template, APA 7 references and transparency statements must be considered alongside its double-blind review requirements.

This profile brings together the journal’s identity, editorial policies and current author instructions. The data table below maps preparation requirements to their official sources, including the distinction between author identities entered during submission and anonymous contribution labels used in the manuscript.

What it is

JOTSE publishes scholarship about scientific and technological education. Its official home page describes a forum for sharing work on engineering teaching and learning, including methodological and pedagogical factors that affect students’ learning experiences. Its print ISSN is 2014-5349; this identifies the same journal’s print edition, rather than a second title.

The journal is relevant to education researchers, engineering educators and research staff helping authors prepare manuscripts. It is an open-access journal: its editorial policy provides immediate access to published content. Reading access and an author’s publication obligations are separate issues, however. The journal also has a publication-charge policy, discussed below.

Use the exact title and ISSN when recording a proposed venue. Reordering “science,” “technology” and “education” can lead to another journal, with different instructions and metrics. A journal-name search alone is therefore a poor basis for transferring a reference, author checklist or bibliometric value into a research-office record.

Who runs it and what it covers

The publisher named on JOTSE’s official site is OmniaScience. The Focus and Scope policy describes interdisciplinary research within university education, especially technology and science, with engineering education as a central concern. Its listed subject areas include general science, telecommunications, electronics, industrial computing, aerospace and automotive topics.

Those subject labels sit within an educational remit. The regular-article policy welcomes pedagogical research, case studies, critical reviews, evaluations, investigations of new methods, action research and discussions of policy or the changing context of engineering education. An author can use these stated categories to explain both the educational problem and the form of the contribution.

For example, an illustrative composite study evaluating a new robotics teaching method has a clearer connection to this scope than a paper reporting only a robotics component’s engineering performance. That is a reading of the published remit, not an editorial acceptance prediction. The journal’s editors make their own assessment of scope and scientific merit.

The policy describes two regular issues annually, with special issues in addition. The Archives lists three issues for 2025 and four for 2024, including themed issues. Thus, the regular publication frequency and a particular year’s total issue count answer different questions. Neither provides an individual manuscript’s publication date.

How to search, read and submit

The public journal interface provides a Search field with Search Scope, plus Browse links labelled By Issue, By Author and By Title. It also exposes Archives, Submissions, Publication Fee and Indexing & Statistics. The following workflow uses these visible labels and the journal’s published instructions; it does not assume undocumented submission screens.

  1. Identify the journal. Open the official JOTSE site and match its full title, publisher and online ISSN to the venue you intend to read or use.
  2. Locate relevant work. Use Search and Search Scope, or browse By Author and By Title. Use By Issue or Archives when you already know the volume and issue.
  3. Open the article record. The home-page table of contents links article titles and offers PDF and HTML versions. Keep the article’s own bibliographic details separate from the journal-level profile.
  4. Assess submission fit. Read Focus and Scope and the regular-article description before treating a technology-related paper as suitable educational research.
  5. Prepare from the current instructions. Open Submissions and its linked jotse2026.docx template. Read the March 2026 guideline announcement alongside the author guidelines, particularly for reference style and declarations.
  6. Complete the published checklist. Address originality, anonymous review preparation, author metadata and suggested reviewers. The Submissions page provides the sign-in and registration links; an account is required to submit and track a manuscript.

The Submissions page allows manuscripts in English or Spanish, while the editorial policy specifies publication in English. Spanish-language submissions therefore carry a translation requirement if accepted. The journal’s wording also describes language-revision obligations for inadequate English; manuscript language should be considered during preparation rather than after assuming acceptance.

How JOTSE’s peer review works

The editorial policy describes double-blind external review, preceded by two editorial appraisals. First, the Editors-in-Chief assess whether the manuscript fits the journal’s focus and scope. An editor then assesses scientific merit, methodological validity, relevance, reader interest and presentation before external review proceeds.

Suitable manuscripts go to two external evaluators without potential conflicts of interest. The policy allows editors to seek other topic specialists when the Reviewer Board does not supply an appropriate reviewer. Reviewers assess content, originality, structure, text quality and their overall evaluation; recommendations and comments return to the editor. The Editors-in-Chief retain the final publication decision, and revised manuscripts can undergo further review.

This is the journal’s description of its process. It should not be turned into a promise that every submission receives external review or that a particular reviewer score guarantees acceptance. The initial appraisals are explicit parts of that process. For terminology, double-anonymized peer review describes the intended separation of author and reviewer identities.

Content type also matters. JOTSE’s Section Policies marks regular articles as peer reviewed but marks Editorial as not peer reviewed. A journal-wide review policy therefore does not establish that every item in its archive passed through the same external review procedure.

Current manuscript preparation requirements

The 2026 template and APA update

The March 11, 2026 announcement says new submissions must use the new template and APA 7 citation and referencing style, replacing APA 5. The Submissions page links jotse2026.docx but still contains a paragraph naming APA 5. The dated announcement explicitly addresses that change, so a new manuscript should be prepared around the APA 7 instruction rather than copying the legacy reference-style label.

The author guidelines accept Word documents in .doc or .docx format and recommend the journal template. They require original work and prohibit simultaneous review by another journal. A paper previously presented at a conference must be substantially improved and properly reference the earlier publication. These are distinct checks: changing the file format or reference style does not address originality or overlapping submission.

Declarations, contributions and anonymity

The same 2026 announcement introduces mandatory Authors’ Contributions, Data Availability and Use of Artificial Intelligence statements. The fuller author guidelines also require declarations of conflicting interests and funding. For funded research, they request the funding agencies and project codes; for research without external funding, they provide a specific no-funding statement.

For multi-author papers, JOTSE requests a contribution statement using role terms and labels such as A for the first author and B for the second author to preserve anonymity. This differs from the submission metadata requirement, which asks for all authors. An author contribution statement describes the work people did; the anonymous manuscript version and the identifiable author record serve different parts of the workflow.

The data statement must indicate the applicable availability arrangement. The guidelines list public-repository access, inclusion in the article or supplements, availability on request, ethical or legal restrictions, third-party restrictions, or no data generated or analyzed. A data availability statement should describe the actual arrangement. The presence of multiple listed options does not mean that every submission must promise public release.

JOTSE also asks authors to state whether AI was used and to identify its use and software where applicable. Its preparation checklist asks which parts of the article involved AI, including text, tables, images, translation or revision. The author guidelines additionally request inclusive language and a conclusion addressing relevant sex-based differences, or explaining why such differentiation is inapplicable or outside the study’s objectives.

Submission metadata and suggested reviewers

The checklist requires all authors and their metadata during submission. It also requests two possible reviewers, with their names, email addresses, institutions, areas of knowledge and interests, in Comments for the Editor. These are proposed reviewers, not a statement that the authors select the evaluators who will handle the paper.

As an illustrative composite preparation check, a three-author engineering-education team could compare its complete author metadata with its A/B/C contribution labels, then match its data statement to the repository or restriction actually used. That crosscheck applies the published requirements without inventing a study result, an acceptance outcome or an additional journal rule.

Indexing and metrics: keep the source and year attached

JOTSE’s own Indexing page reports Scopus coverage from 2014 onward. It lists a 2025 CiteScore of 4.3, a 2025 SJR of 0.456 and a 2025 SNIP of 1.042. These figures are publisher-reported values on that page; they are not presented here as independently checked indexer records.

The publisher also lists Education as Q1 and Computer Science Applications as Q3 under its Scopus 2025 subject information, while its SJR 2025 entry is labelled Q2. Preserve those category and indicator labels when quoting the page. Removing them produces a vague “journal quartile” that loses the distinctions in the source.

The page’s 2026 CiteScore entry is specifically labelled May. It should not replace the 2025 value without that time qualifier, and none of these named entries should be relabelled a Clarivate Journal Impact Factor. Journal identity, metric name, reporting year and category belong together in a bibliometric record.

Strengths and limits

JOTSE’s stated strengths for readers include immediate open access, visible issue archives and article links in PDF and HTML. For authors, its policies describe manuscript categories, editorial screening, external review and a structured set of declarations. Its archiving policy names LOCKSS for distributed preservation among participating libraries.

The publication policy separates free submission and double-blind review from charges associated with accepted publication. OmniaScience contacts authors after acceptance, and the policy allows payment to be split among authors or funding institutions on request. This article publication charge is an author-side obligation; immediate reader access does not mean accepted publication carries no charge.

There are also documentary distinctions to retain. Regular frequency does not describe every year’s special issues, and the current APA update differs from older wording on the submission page. The copyright notice mixes CC-BY-NC wording with a Creative Commons Attribution 4.0 name, while the site footer names Attribution 4.0. That inconsistency should not be converted into a blanket permission for every reuse. The license notice attached to the particular article is material to a reuse decision.

Alternatives and similarly named journals

The following journals have overlapping educational interests but different identities. The comparison is based on their publishers’ stated scopes, not a ranking or an assessment of acceptance chances.

Journal Publisher’s stated emphasis Distinction from JOTSE
Journal of Science Education and Technology The intersection of science education and educational technology worldwide. Springer’s distinct hybrid journal; electronic ISSN 1573-1839 and print ISSN 1059-0145.
International Journal of Educational Technology in Higher Education Technology-enhanced and digital learning in higher education, including learning, training, research and management. A higher-education digital-technology remit extending beyond JOTSE’s engineering-education focus.

Journal of science and technology education: identifying the intended title

If a reading list or informal message uses “journal of science and technology education,” match the actual citation to a publisher and ISSN before selecting a destination. JOTSE’s formal title puts Technology before Science; Springer’s Journal of Science Education and Technology puts Science Education before Technology. They are separate journals. Their similar words do not make their submission instructions, access models or metrics interchangeable.

Sources

Official publisher pages; checked 2026-11-14.

Data: JOTSE manuscript and submission preparation crosswalk

An original crosswalk of JOTSE author requirements compiled from its Submissions page and March 11, 2026 guideline announcement. The table distinguishes manuscript declarations from submission metadata and reviewer suggestions, retaining the newer APA instruction separately from legacy page text.

Period covered: 2026.

JOTSE manuscript and submission preparation crosswalk
RequirementPreparation specified by JOTSEDocument or submission locationOfficial source URL
Current template and referencesNew submissions must use the new template and APA 7, replacing APA 5.New manuscripthttps://www.jotse.org/index.php/jotse/announcement
Conflicting interestsDeclare whether a conflict of interest exists.Manuscript declarationhttps://www.jotse.org/index.php/jotse/about/submissions
FundingIdentify funding agencies and project codes, or state there was no external funding.Before manuscript referenceshttps://www.jotse.org/index.php/jotse/about/submissions
Author contributionsSpecify each author’s contribution for multi-author papers; use A, B and subsequent labels to preserve anonymity.Manuscript contribution statementhttps://www.jotse.org/index.php/jotse/about/submissions
Data availabilityIndicate repository access, article or supplement inclusion, request access, ethical/legal restrictions, third-party restrictions, or no data generated/analyzed.Manuscript data availability statementhttps://www.jotse.org/index.php/jotse/about/submissions
Artificial intelligenceIndicate use or nonuse; when used, specify the purpose and software.Manuscript AI statementhttps://www.jotse.org/index.php/jotse/about/submissions
Author metadataSubmit all authors and their metadata during the submission process.Submission metadatahttps://www.jotse.org/index.php/jotse/about/submissions
Suggested reviewersProvide two possible reviewers with name, email, institution, knowledge area and interests.Comments for the Editorhttps://www.jotse.org/index.php/jotse/about/submissions

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about Journal of Technology and Science Education: JOTSE Guide

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →