Skip to main content
v2026.11,986 entries · CC-BY 4.0

Land Use Planning: Definition, FAO 10-Step Process and Suitability Classes

Land use planning explained: FAO’s ten-step process, S1-N2 land suitability classes and a worked scoring example with Excel, R and Python.

Written and maintained by CASRAI Editorial Board

Published

On this page

Land use planning is the systematic assessment of land and water potential, the alternatives for using them, and the economic and social conditions around them, so that the best land-use options can be selected and adopted. That is the definition in the Food and Agriculture Organization’s Guidelines for land-use planning (FAO, 1993), whose stated purpose is “to select and put into practice those land uses that will best meet the needs of the people while safeguarding resources for the future.” In practice the term covers two overlapping activities: the analytical work of evaluating what land can sustain, and the public-sector work of setting rules such as zoning and comprehensive plans that steer development. This guide explains both, sets out the FAO ten-step process, and walks through a worked suitability-scoring example with the arithmetic shown.

What is land use planning? Definition and scope

Land use planning is a decision process, not a single calculation. FAO’s guidelines describe it as iterative and flexible rather than a fixed sequence run once, and they name two conditions for it to be useful: the need for change must be accepted by the people involved, and there must be the political will and ability to implement the result (FAO, 1993, ch. 1).

Planners also classify land by use category, such as commercial, residential, industrial, institutional and park land. The US Federal Climate Resilience Toolkit describes planning in this setting as “a process by which a community documents current conditions and makes projections for the future” (NOAA, 2026, read 2026-11-13). The two framings fit together: FAO describes the rural and resource-oriented analytical core, while local-government planning applies similar logic through legal instruments.

Land use planning versus urban planning

Land use planning is the broader term. Urban planning applies it to cities and towns, where the tools are mostly regulatory and spatial. FAO’s guidelines, by contrast, were written for national, district and local levels in settings where agriculture, forestry, water and conservation compete for the same land.

The land use planning process: FAO’s ten steps

The FAO guidelines break the process into ten steps (FAO, 1993, ch. 3, read 2026-11-13). Each step produces something the next step needs.

  1. Establish goals and terms of reference. Output: an agreed statement of what the plan is for and who decides.
  2. Organize the work. Output: a team, a schedule and resources.
  3. Analyse the problems. Output: a picture of the current land-use situation and what is going wrong.
  4. Identify opportunities for change. Output: candidate land uses and changes worth examining.
  5. Evaluate land suitability. Output: a land suitability classification (see below).
  6. Appraise the alternatives. Output: environmental, economic and social analysis of each option.
  7. Choose the best option. Output: a selected land-use option.
  8. Prepare the land-use plan. Output: the written plan.
  9. Implement the plan. Output: changes on the ground.
  10. Monitor and revise the plan. Output: feedback that can send the process back to an earlier step.

Step 5, land evaluation, is where the quantitative work usually sits. The FAO guidelines say it answers one of two questions: for a specified use, which areas are best suited; or for a given area, which use is best suited.

Land suitability classification: S1, S2, S3, N1 and N2

FAO’s land-evaluation framework sorts land units into two orders, Suitable (S) and Not suitable (N), and then into classes within each. The data table below sets out the five classes with their 1976 framework definitions. In the 1976 framework, land is Suitable when sustained use is expected to yield benefits that justify the inputs without unacceptable risk of damage to land resources; it is Not suitable when its qualities appear to preclude sustained use (FAO, 1976, ch. 3, read 2026-11-13).

Three points from the guidelines matter when reading a classification:

  • Classes are use-specific. The guidelines state that land cannot be graded from best to worst irrespective of the kind of use. A unit that is S1 for irrigated rice can be N1 for a different crop or for housing.
  • Land quality is not the same as land characteristic. A land characteristic is a measurable attribute, such as slope or soil depth. A land quality is a complex attribute with a direct effect on use, such as water availability, nutrient supply, rooting conditions or erosion hazard.
  • Sub-classes flag the limitation. Letters can be appended to a class, for example S2e (erosion) or S2w (water). FAO notes there is no standard letter system, so a report should define its own letters.

Worked example: weighted suitability scoring

The following example is an illustrative composite built for this guide. The units, weights, scores and cut-offs are invented to show the arithmetic; they are not drawn from a real survey and are not FAO-prescribed values. FAO’s simplified procedure is to describe the land-use type, determine its requirements, map land units and their properties (climate, slope, soils), and compare requirements with properties. A weighted score is one common way to organise that comparison.

Setup. Three land units (A, B, C) are scored from 1 (severe limitation) to 4 (no limitation) on four land qualities for one specified use. The weights sum to 1.00.

Land quality Weight Unit A Unit B Unit C
Slope 0.30 4 3 1
Soil depth 0.25 3 2 2
Water availability 0.25 4 3 2
Erosion hazard (4 = low) 0.20 3 2 1

Arithmetic. Weighted score = sum of (weight × score).

  • Unit A: (0.30 × 4) + (0.25 × 3) + (0.25 × 4) + (0.20 × 3) = 1.20 + 0.75 + 1.00 + 0.60 = 3.55
  • Unit B: (0.30 × 3) + (0.25 × 2) + (0.25 × 3) + (0.20 × 2) = 0.90 + 0.50 + 0.75 + 0.40 = 2.55
  • Unit C: (0.30 × 1) + (0.25 × 2) + (0.25 × 2) + (0.20 × 1) = 0.30 + 0.50 + 0.50 + 0.20 = 1.50

Interpreting the result

A score only becomes a suitability class once cut-offs are chosen and justified. Using the illustrative cut-offs below, Unit A is S1, Unit B is S2 and Unit C is N1 or N2 depending on whether its limitations can be corrected at acceptable cost.

Illustrative score Class Reading
3.25 or higher S1 No significant limitations, or only minor ones (Unit A, 3.55)
2.50 to 3.24 S2 Limitations moderately severe in aggregate (Unit B, 2.55)
1.75 to 2.49 S3 Limitations severe; expenditure only marginally justified
Below 1.75 N1 or N2 N1: limitations might be surmountable in time but not at currently acceptable cost; N2: so severe that sustained use is precluded (Unit C, 1.50)

The class descriptions in the Reading column follow the FAO (1976) definitions; the numeric bands are this example’s own. Unit B’s score of 2.55 sits just above its band boundary, so a small change in one weight could move it to S3. Testing that is the job of a sensitivity check; see tornado diagrams for sensitivity analysis for one way to present it.

Assumptions and common mistakes

  • Averaging hides a deal-breaker. A weighted sum lets high scores offset a very low one. If one quality is essential for the use (for example water for an irrigated crop), treat a score of 1 on it as limiting regardless of the total.
  • Weights are judgements. Document who set them and why, and report how the classes change when they are varied.
  • Grading land without a use. FAO’s point that land cannot be ranked best to worst irrespective of use means every class must name the land-use type it applies to.
  • Confusing characteristics with qualities. Slope is a characteristic; erosion hazard is a quality that depends on slope, soil and climate. Scoring both as if independent double-counts the same driver.
  • Skipping the later steps. Suitability is step 5 of ten. FAO’s steps 6 and 7 add environmental, economic and social appraisal before an option is chosen.
  • Treating the plan as finished. Step 10 exists because the process is meant to be revised.

Land use planning tools in local government

The US Federal Climate Resilience Toolkit lists the instruments communities use to put plans into effect (NOAA, 2026, read 2026-11-13): zoning, which controls what owners and developers may do, including density; comprehensive plans, which set a long-term vision; subdivision regulations, which govern layout relative to flood and fire hazard zones; development incentives and building codes; and open space preservation, for example through land trusts. Implementation happens through capital investments, development regulations and development reviews. For hazard-related layers that feed these decisions, see flood risk mapping.

How to report a land use planning analysis (APA 7th)

Describe the land-use type, the land qualities, the scoring scale, the weights and the cut-offs, and cite the framework. Example wording: “Land units were classified using the FAO suitability structure (FAO, 1976, 1993). Each unit was scored 1-4 on four land qualities, weighted, and summed; units scoring 3.25 or higher were assigned to class S1.”

Reference list entries (APA 7th edition format):

  • Food and Agriculture Organization of the United Nations. (1976). A framework for land evaluation (Soils Bulletin 32). https://www.fao.org/4/x5310e/x5310e04.htm
  • Food and Agriculture Organization of the United Nations. (1993). Guidelines for land-use planning (FAO Development Series 1). https://www.fao.org/4/t0715e/t0715e02.htm

How to calculate a weighted suitability score in Excel, R or Python

Each snippet reproduces Unit A from the worked example (expected result 3.55).

Excel. Put weights in B2:B5 and Unit A’s scores in C2:C5, then:

=SUMPRODUCT(B2:B5, C2:C5)

R.

w <- c(0.30, 0.25, 0.25, 0.20)
a <- c(4, 3, 4, 3)
sum(w * a)   # 3.55

Python.

import numpy as np
w = np.array([0.30, 0.25, 0.25, 0.20])
a = np.array([4, 3, 4, 3])
print(round(float(w @ a), 2))   # 3.55

For mapped land units, the same weighted sum is applied per grid cell or polygon in GIS software; see spatial data analysis and remote sensing for the data layers involved.

Frequently asked questions

What is the purpose of land use planning?

According to FAO (1993), it is to select and put into practice the land uses that best meet people’s needs while safeguarding resources for the future.

What are the steps in land use planning?

FAO lists ten: establish goals and terms of reference, organize the work, analyse the problems, identify opportunities for change, evaluate land suitability, appraise the alternatives, choose the best option, prepare the plan, implement it, and monitor and revise it.

What do S1, S2, S3, N1 and N2 mean?

They are FAO land suitability classes: S1 highly suitable, S2 moderately suitable, S3 marginally suitable, N1 currently not suitable and N2 permanently not suitable. See the data table below for the 1976 definitions.

Is zoning the same as land use planning?

No. Zoning is one regulatory tool within land use planning; it controls what owners and developers may do on a parcel, including density. Comprehensive plans, subdivision regulations, incentives and open space preservation are others.

Can land be ranked from best to worst?

Not without naming a use. FAO states that land cannot be graded from best to worst irrespective of the kind of use.

Sources

  • FAO. (1993). Guidelines for land-use planning. FAO Development Series 1. https://www.fao.org/4/t0715e/t0715e02.htm (chapters 1 and 3; read 2026-11-13).
  • FAO. (1976). A framework for land evaluation. Soils Bulletin 32. https://www.fao.org/4/x5310e/x5310e04.htm (chapter 3; read 2026-11-13).
  • NOAA / U.S. Federal Climate Resilience Toolkit. Planning and Land Use. https://toolkit.climate.gov/planning-and-land-use (read 2026-11-13).

Data: FAO land suitability classes S1 to N2 with framework definitions

Compiled from the FAO 1976 land evaluation framework (class definitions) and the FAO 1993 land-use planning guidelines (class names and sub-class notes) to show each suitability class, its order, its name and the limitation level it denotes.

FAO land suitability classes S1 to N2 with framework definitions
ClassOrderClass name (FAO 1993)Limitation level (FAO 1976 definition, condensed)Guidance note (FAO 1993)
S1SuitableHighly suitableNo significant limitations, or only minor ones that will not significantly reduce productivity or benefits or raise inputs above an acceptable level1993 guidance: include the best 20-30% of suitable land
S2SuitableModerately suitableLimitations that in aggregate are moderately severe; appreciably inferior to S1Sub-class letters such as e (erosion) or w (water) may be added; no standard letter system
S3SuitableMarginally suitableLimitations that are severe; expenditure only marginally justifiedSame sub-class convention as S2
N1Not suitableCurrently not suitableLimitations may be surmountable in time but cannot be corrected with existing knowledge at currently acceptable costNot suitable now
N2Not suitablePermanently not suitableLimitations so severe as to preclude any possibility of successful sustained useNot suitable permanently

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Land Use Planning: Definition, FAO 10-Step Process and Suitability Classes

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →