Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Short answer: to set a whole LaTeX document in two columns, add twocolumn to the class options. To switch between one and several columns on the same page, load the multicol package and wrap the text in a multicols environment. This guide is for researchers formatting a paper, report or poster who need to choose between the two, adjust spacing and rules, and fix the usual float and page-break problems. Phrasings such as “LaTeX two column”, “two columns in LaTeX” and “LaTeX multicols” all point to these same two mechanisms.
What it is used for in research
Two-column layouts are the default in many journal and conference classes, and researchers also use them for appendices, abstracts, glossaries and reference lists inside an otherwise single-column thesis or report. The two tools solve different problems:
| Need | twocolumn class option / \twocolumn |
multicol package |
|---|---|---|
| Scope | The whole document, or from the point where \twocolumn is issued |
Only the text inside each multicols environment |
| Switching on the same page | No: \twocolumn and \onecolumn each start a new page |
Yes: the manual describes switching between one- and multi-column format on the same page |
| Number of columns | Two | Up to 10 (package manual) |
| Last page | Standard two-column behaviour | Columns are balanced by default; multicols* turns balancing off |
| Floats | Unstarred figure/table fill one column; starred forms span both |
Only starred (page-wide) floats are supported inside the environment |
Sources for the table: the LaTeX2e unofficial reference manual, section twocolumn (June 2026 edition, read 2026-11-08) and the multicol manual (read 2026-11-08).
How to install or access it
The multicol package is by Frank Mittelbach and is maintained by the LaTeX Project Team. The CTAN entry (ctan.org/pkg/multicol, read 2026-11-08) lists version 2.0b under the LaTeX Project Public License 1.3c, as part of the latex-tools bundle. It ships with TeX Live (in the tools collection) and MiKTeX (as latex-tools), so a standard distribution already has it. The twocolumn option needs nothing extra: it is a standard class option. Online editors such as Overleaf include both.
Step-by-step: two columns in LaTeX
Option 1: make the whole document two-column
- Pass the option to the document class:
\documentclass[11pt,twocolumn]{article}. - Optionally set the gap and a dividing rule in the preamble, before two-column mode starts:
\setlength{columnsep}{40pt}and\setlength{columnseprule}{0.4pt}. The reference manual gives 35pt as the default column separation and 0pt (no rule) as the default rule width. - To start two-column mode mid-document use
\twocolumn, optionally with one-column text as an argument (\twocolumn[prelim one column text]), which is typeset in one-column mode first, a common way to put a full-width title and abstract above two columns. Use\onecolumnto return. Each starts a new page.
Option 2: columns inside the page with multicols
- Load the package in the preamble:
\usepackage{multicol}. - Wrap the text:
\begin{multicols}{2}…\end{multicols}. Replace2with any number up to 10. - To put single-column material above the columns, use the optional argument:
\begin{multicols}{2}[\section{Glossary}]. If less thanpremulticolsof vertical space (default 50pt) remains on the page, the manual says a new page is started; a third argument overrides that minimum. - Adjust spacing with
\setlength{columnsep}{1cm}. Vertical space above and below the environment ismulticolsep(default 12pt plus 4pt minus 3pt). - For a vertical rule, set
\setlength{columnseprule}{0.4pt}to a positive value. The colour followscolumnseprulecolor, which isnormalcolorby default; the manual notes it can be redefined.
\documentclass{article}
\usepackage{multicol}
\setlength{columnsep}{1cm}
\setlength{columnseprule}{0.4pt}
\begin{document}
\section{Overview}
Single-column introduction.
\begin{multicols}{3}[\subsection*{Abbreviations}]
... text that flows through three balanced columns ...
\end{multicols}
Back to a single column on the same page.
\end{document}
Output and how to read it
Inside multicols, text fills the first column to the bottom of the page area, then the next, and by default the columns on the last page are balanced to equal height. Footnotes are placed at the page bottom rather than under each column. Lines at the bottom of columns are aligned by default (flushcolumns); raggedcolumns stops that alignment. If you want the last page to fill columns from the left and leave white space on the right, use the starred environment multicols*, which only works at the top level.
Controlling column breaks
\columnbreak forces a break after the current line. From version 1.9 it accepts an optional argument from 0 (a slightly desirable break) to 4 (forced). \newcolumn also forces a break but lets the column run short. According to the manual, \pagebreak is no use inside multicols, because it ends the collection of all columns. See page breaks in LaTeX for page-level control outside the environment.
Troubleshooting
Figure or table disappears inside multicols
The multicol manual states that only page-wide (starred) floats can be used within the environment. An unstarred figure or table, or a marginpar, triggers the warning “Floats and marginpars not allowed inside `multicols’ environment!” and the float is lost. Use figure* or table*, or end the multicols environment and place the float between environments. A starred float placed there spans the full text width; related table techniques are in multirow in LaTeX.
Floats in a twocolumn document
With the class option, unstarred figure and table take one column, figure* and table* take two, and LaTeX places starred floats at the top of a page. If a tall starred float drifts to the back of the document, the reference manual suggests the [tp] or [t!] placement specifier, or increasing dbltopfraction (default 0.7).
A new page starts before the columns
If the page has less free space than premulticols (default 50pt), the environment moves to a new page. Pass a smaller minimum as the third argument, or reduce premulticols.
Column separation or rule has no effect
For twocolumn, the reference manual says to set columnsep and columnseprule before two-column mode starts; the preamble is a good place. For multicols the rule only appears when columnseprule is positive.
Journal template is already two-column
Many journal and conference classes set their own column layout, so check the class documentation before adding twocolumn or multicol. A publisher template such as the one in the Elsevier LaTeX template guide sets the main body layout; reserve multicols for inserts such as a glossary, and follow the class instructions on floats.
Free alternatives
| Approach | What it does | Source |
|---|---|---|
twocolumn class option / \twocolumn |
Two-column output for the whole document or from a chosen page | LaTeX2e unofficial reference manual |
multicol package |
1 to 10 balanced columns, switchable on the same page | CTAN, package manual (LPPL 1.3c) |
multicols* |
Same, with unbalanced columns on the last page | multicol manual |
Both mechanisms are free software distributed with standard TeX distributions.
FAQ
How do I make two columns in LaTeX?
Add twocolumn to \documentclass for the whole document, or use \begin{multicols}{2} from the multicol package for part of a page.
What is the difference between multicol and multicols?
multicol is the package name (\usepackage{multicol}); multicols is the environment it provides. Writing “multicols” in \usepackage will not load it.
How many columns can multicols create?
Up to 10, according to the package manual and the CTAN entry.
How do I stop the last page from balancing?
Use \begin{multicols*}{2} instead of multicols.
Can I add a line between columns?
Yes. Set columnseprule to a positive length such as 0.4pt before the columns begin.
Sources
- CTAN, multicol package page, read 2026-11-08.
- Frank Mittelbach, The multicol package (manual PDF), read 2026-11-08.
- Karl Berry, LaTeX2e unofficial reference manual, twocolumn (June 2026), read 2026-11-08.
- Overleaf, Multiple columns, read 2026-11-08.







