Written and maintained by CASRAI Editorial Board
Published
On this page
Definition and scope
Multi-layer insulation (MLI), often referred to as ‘superinsulation,’ operates on the principle of radiation balance. By stacking multiple reflective sheets, each layer acts as a barrier to infrared radiation, reflecting 95% to 98% of incident heat back to its source. The thin spacers between these layers prevent physical contact, which minimizes conductive heat transfer. This combination makes MLI the most effective passive thermal control for aerospace applications and cryogenic systems where convective heat transfer is absent.
How it works or how it is used in practice
In a vacuum, where convection is nonexistent and conduction can be controlled, radiation is the dominant heat transfer mechanism. MLI disrupts this by creating a series of thermal resistances. Typically, MLI blankets are composed of reflective layers—thin films (e.g., aluminized Mylar or Kapton) that provide the radiation barrier—and spacers—low-conductivity materials (e.g., Dacron netting) placed between reflective layers to maintain separation and minimize conductive paths. During launch ascent or vacuum drawdown in a lab, blankets must be properly vented—through perforations or seam gaps—to prevent trapped air from causing mechanical failure of the blanket.
Where it matters for labs, clinics or supply decisions
For research administrators and lab managers involved in space-related or cryogenic projects, understanding MLI is crucial for thermal-vacuum (TVAC) testing—ensuring that test mock-ups are correctly wrapped to accurately simulate flight conditions—and cryogenic storage—maintaining stable temperatures for sensitive samples or fuel by minimizing radiative heat gain. Component integration must also consider attachment points that avoid ‘thermal shorting,’ where conductive paths bridge the insulation and significantly reduce performance.
Common misunderstandings
MLI effectiveness on Earth: MLI is largely ineffective in atmospheric pressure because air conduction and convection bypass the reflective barriers. ‘Thermal shorting’: Simply wrapping an object in MLI is not sufficient; poor installation—such as taping edges tightly or over-compressing layers—can create conductive paths that render the insulation ineffective.
Frequently asked questions
What is multi-layer insulation (MLI) and what is it used for?
Multi-layer insulation (often called ‘superinsulation’) is a high-performance thermal protection system composed of multiple thin, reflective sheets. It is primarily used in spacecraft, satellites, and cryogenic systems to minimize heat loss or gain caused by thermal radiation.
How does multi-layer insulation work?
MLI works on the principle of radiation balance. It consists of multiple layers of plastic films coated with a reflective metal. Each successive layer reflects a high percentage of infrared radiation away, reducing heat transfer. Spacers are placed between sheets to minimize conductive heat transfer.
Why doesn’t MLI work well on Earth?
MLI is designed for a vacuum. In the presence of air, heat transfer via conduction and convection takes over, making the reflective barriers largely ineffective.
Why do satellites look like they are wrapped in gold foil?
The ‘gold’ appearance is actually an amber-colored Kapton film layer used for its thermal stability and durability against the harsh space environment.
What are the main limitations or mistakes when installing MLI?
Common mistakes include ‘thermal shorting,’ where conductive paths connect the inner and outer layers, and ‘over-compaction,’ where packing layers too tightly compresses the spacers and increases conductive heat transfer.
Sources
- Wikipedia: Multi-layer insulation, checked 2026-11-18
- European Space Agency: Thermal Control, checked 2026-11-18
- CryoWest: MLI Technical Overview, checked 2026-11-18
Data: MLI Layer Components
A crosswalk of common MLI blanket components, their typical materials, and functions based on technical specifications.
| Component (none) | Typical Material (none) | Function (none) |
|---|---|---|
| Reflective Layer | Aluminized Mylar | High radiation reflectivity |
| Spacer | Dacron Netting | Minimizes thermal conduction |
| Outer Layer | Kapton | UV resistance and durability |
Sources
- Wikipedia: Multi-layer insulation (accessed 2026-11-18)
- CryoWest: MLI Technical Overview (accessed 2026-11-18)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







