Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop nebulizer piece supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Nebulizer T-Piece: Port Sizes, Types and FDA Class

What a nebulizer T-piece is, how 22 mm and 15 mm ports are written in FDA records, and how four recorded T-pieces differ.

Written and maintained by CASRAI Editorial Board

Published · Last updated

This page describes products and general use; it is not medical advice.

On this page

A nebulizer T-piece is a T-shaped airway connector with three ports. In FDA device records, T-pieces and “T” adapters are listed as single-use, non-sterile accessories whose connector sizes (mostly 22 mm and 15 mm) are written into the product description. It is read by clinic staff, respiratory therapy departments, equipment buyers and students who need to interpret a product listing and match ports correctly.

What a nebulizer T-piece is

A T-piece (also sold as a “T adapter”, “T adaptor” or “T-piece adapter”) is a three-port connector. The two horizontal ports sit in line and the third vertical port branches off between them, which gives the part its shape. Its purpose is to join parts of a breathing or aerosol circuit in one fitting; the exact parts it joins are stated in each manufacturer’s description.

Under US regulation, a device “intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask” is an airway connector (21 CFR 868.5810). That regulation classifies airway connectors as Class I (general controls) and exempts them from 510(k) premarket notification, subject to the limitations in 21 CFR 868.9 (eCFR, checked 2026-10-30). The FDA product code attached to a given T-piece varies by product (see the table below).

Who uses it: clinic and hospital respiratory staff, home-care and equipment suppliers, and students learning the parts of an aerosol circuit. For the wider circuit see respiratory therapy equipment and what a nebulizer is.

How it is built: ports and materials

The size of each port is stated in the manufacturer’s product description, and the description is the only reliable place to read it. FDA GUDID records (AccessGUDID, checked 2026-10-30) express sizes as inner diameter (I.D.) or outer diameter (O.D.) of each port, for example:

  • Teleflex HUDSON RCI: horizontal ports 22 mm O.D.; vertical port 15 mm I.D. / 22 mm O.D.
  • AirLife U/Adapt-It “T” Adapter: a 15 mm I.D. base, one arm 22 mm O.D. and one arm 22 mm I.D.
  • Intersurgical: described with 22M (male) and 15F (female) port codes, in versions with one-way valves.

In these records the “Clinically Relevant Size” field reads “No Device Sizes”; dimensions appear only in the description text, so the values above belong to those named products and are not a universal standard for every T-piece.

Types and variants

The same three-port shape is sold under several names and with or without valves. The table compares four T-pieces recorded in AccessGUDID. Every row is taken from that product’s own record (checked 2026-10-30).

Product (maker) Port description in record Valve FDA product code Single-use / sterile Labeled not made with natural rubber latex
HUDSON RCI Aerosol “T” Adaptor, cat. 1077 (Teleflex) Horizontal ports 22 mm O.D.; vertical port 15 mm I.D. / 22 mm O.D. None named BYX (tubing, pressure and accessories) Single-use; not sterile Yes
AirLife U/Adapt-It “T” Adapter (AirLife) 15 mm I.D. base, one arm 22 mm O.D., one arm 22 mm I.D. None named BZA (connector, airway (extension)) Single-use; not sterile Yes
T-PIECE 22M, 22M/15F, 22M with one-way valves, model 1954000 (Intersurgical) 22M, 22M/15F, 22M One-way valves BZA Single-use; not sterile Yes
T-PIECE 22F, 22M, 22M with one-way valve, model 1952000 (Intersurgical) 22F, 22M, 22M One-way valve BZA Single-use; not sterile Yes

Two things in the table are easy to miss. First, the records use two different FDA product codes (BYX and BZA) for similar-looking T-pieces, so a search by product code alone will not find them all. Second, the premarket flag differs: the Teleflex and AirLife records are marked exempt from premarket submission, while the two Intersurgical records are marked “No” for that field.

T-piece adapter vs nebulizer adapter

“T-piece adapter” and “T adapter” name the same three-port shape. “Nebulizer adapter” is a broader label for any fitting that joins a nebulizer to tubing or an interface, and a T-piece is one kind. If a listing says only “nebulizer adapter”, read its port description before assuming it is a T. For tubing connectors see nebulizer tubing.

How a T-piece differs from other patient interfaces

A T-piece is a connector. A mask, face tent or tracheostomy collar is a patient interface, which is a different product class. The FDA definition of an airway connector refers to joining a breathing gas source to a tracheal tube, tracheostomy tube or mask; see the aerosol mask guide for the interface list and the tracheostomy collar guide for the collar option.

Sizes and specifications that matter

The values that appear in the records are 22 mm and 15 mm, and each is qualified by O.D. or I.D. (outer or inner diameter) and by male or female (M or F) in the Intersurgical names. The same number can describe different fits: “22 mm O.D.” on the Teleflex horizontal ports and “22 mm I.D.” on one arm of the AirLife adapter are not the same dimension.

How to choose

The records support one criterion: the connector sizes stated in the product description must correspond to the parts being joined. Check each port on the T-piece against the matching port on the tubing, nebulizer and interface in the manufacturer’s description, including O.D. versus I.D. and male versus female. Whether a valve version is appropriate for a given circuit is set by the equipment’s instructions for use (IFU), not by this page.

Safe use and handling basics

  • The records list these T-pieces as single-use and not sterile. Follow the IFU for the specific product for use, cleaning and replacement.
  • The records carry a “not made with natural rubber latex” label for these four products; check the label of the exact product in use if latex is a concern.
  • Assembly of a circuit for an individual patient is a clinical decision for qualified staff, following the IFU and facility policy.

Common mistakes

  • Reading “22 mm” without noting whether it is an outer or inner diameter (see the AirLife and Teleflex descriptions above).
  • Assuming every T-piece has the same port sizes; the records list different combinations of 22 mm and 15 mm ports.
  • Searching by one FDA product code; T-pieces appear under both BYX and BZA in the records.
  • Treating “nebulizer adapter” and “T-piece adapter” as interchangeable when the listing does not show a three-port description.

FAQ

What is a nebulizer T-piece?

A three-port airway connector. In the four FDA records compared above, its ports are described in 22 mm and 15 mm sizes, with some versions including one-way valves.

What is the difference between a T-piece adapter and a nebulizer adapter?

“T-piece adapter” and “T adapter” name the three-port shape. “Nebulizer adapter” is a broader label for any fitting that joins a nebulizer to tubing or an interface, so check the port description in the listing.

Are nebulizer T-pieces single-use?

The four records above list them as single-use and not sterile. Use and replacement follow the manufacturer’s instructions for use for the specific product.

Is a T-piece an FDA-regulated device?

The FDA defines an airway connector in 21 CFR 868.5810 as Class I (general controls), exempt from 510(k) subject to the limits in 21 CFR 868.9. Individual records show different product codes (BYX and BZA) and different premarket-exempt flags.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Nebulizer T-Piece: Port Sizes, Types and FDA Class

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →