Written and maintained by CASRAI Editorial Board
Published
On this page
An ostomy bag clip is a small fastener that closes the open tail of a drainable ostomy pouch so the contents stay in until the pouch is emptied. The classic version is a single moulded plastic clip with two hinged limbs that clamp the folded tail shut; an “ostomy bag with a clip” is a drainable pouch supplied for use with one, as opposed to a pouch whose closure is built into the tail.
This page describes products and general use; it is not medical advice.
Who uses it: people with an ileostomy, colostomy or urostomy who wear a drainable pouch, the nurses and clinic staff who supply them, and buyers and students who need to tell clips apart from the other closure systems on the market.
What an ostomy bag clip is
A clip belongs to the drainable pouch, not to the stoma or the skin. A drainable ostomy pouch has an open end, often called the tail, that is opened to empty the pouch and then closed again. A closed (non-drainable) pouch has no such opening and is discarded when full; the difference between the two is covered in what an ostomy bag is, which also places pouches within the wider ostomy appliance system.
In United States regulation the pouch itself is defined in 21 CFR 876.5900, “Ostomy pouch and accessories”. The regulation describes a bag attached to the skin with adhesive to collect fecal material or urine after an ileostomy, colostomy or ureterostomy, and lists the ostomy pouch, ostomy adhesive, colostomy pouch, ostomy drainage bag with adhesive, ostomy protector and ostomy size selector within the category. Such devices are Class I (general controls) and exempt from premarket notification, subject to the limitations in 21 CFR 876.9. A separate tail clip is not named in that list, so this page does not claim a specific regulatory classification for clips as stand-alone items; the clip is best understood as part of the pouch’s closure system.
How a hinged ostomy clip is built and how it works
The most widely recognised design is described in US patent 4,983,172, “Clip for drainable ostomy pouch” (Kingsdown Medical Consultants; granted 8 January 1991; the patent is now expired, so it is useful as a plain description of the design rather than as a product claim). The patent describes:
- Material: a single moulded clip of synthetic plastic, preferably a polypropylene copolymer.
- Two limbs and a hinge: the two limbs are joined by an integral hinge, so the clip is one piece with no separate parts to lose.
- Channel and catches: a bar-like first limb is pressed into a channel-shaped second limb and is held there by overhanging catch portions.
- Closing the tail: the pouch tail is clamped between the limbs, with the tail reversing direction by 180 degrees around the closing limb.
- Opening: the catches are pushed apart using flanges (ears) on the clip and the first limb is lifted by a finger surface.
The stated advantage is that the clip “can readily be opened with one hand even by an aged and infirm, or non-dexterous user”. That sentence is the patent’s claim about its own design, not an independent test result, but it shows what the design was meant to solve: a closure that can be operated repeatedly without two-handed dexterity. The patent’s background lists the earlier closures it was improving on: clamps, snap closures, hook-and-loop (touch) fasteners, interlocking ribs and a rubber tube-and-channel arrangement.
Clip closures and other tail closures
Later patents from pouch manufacturer Convatec (US 10,588,773, with a priority date of 24 April 2007 and granted 17 March 2020, and US 12,102,553, granted 1 October 2024) discuss the drawbacks of clips and of other closures in their background sections. They are manufacturer statements in patent documents, so read them as the stated design problem behind newer closures, not as ratings of any specific product. The data table below compares the closure types they describe.
Ostomy bag with a clip versus an integrated closure
The Convatec patents state that a clip fastener is relatively rigid and that some people find clips uncomfortable to wear. They also describe the clip as an additional, typically separate item that the person with the ostomy needs to manipulate and operate. The clip also has to pinch the pouch film hard enough to prevent leakage while not opening unintentionally or cutting the film. Their proposed alternative is a self-sealing closure on the pouch itself: an adhesive-coated, textured film on the outer panels of the tail that is folded or rolled, can be peeled apart and resealed, and is described as working when wet. The stated goals are a closure that is lightweight, easy to manipulate, integral with the tail, leak proof, soft and flexible, easily reusable and intuitive.
So a “bag with a clip” and a “bag with an integrated closure” differ mainly in whether the closing hardware is a separate piece. With a clip, the tail is folded and held by a separate fastener; with an integrated closure, the means of closing is part of the tail film itself.
Types and variants
The table below is limited to the closure types the sources above describe. It states how each closes and the trade-offs the patents themselves state. The sources do not rank the types or recommend one for any person.
| Closure type | How it closes | Trade-off stated in the source |
|---|---|---|
| Hinged plastic clip | Two hinged limbs clamp the folded tail; catches hold the limbs shut (US 4,983,172) | Designed to open one-handed; described elsewhere as rigid, a separate item to handle, and needing enough grip to seal without cutting the film (US 10,588,773) |
| Hook-and-loop | Touch fastener on the tail | Described as difficult to wipe clean; a fabric base absorbs liquids (US 10,588,773) |
| Mushroom-projection fastener | Interlocking projections | Described as harder to manufacture; closing is “not readily intuitive” (US 10,588,773) |
| Rigid-backed closure | Rigid backing presses the tail closed | Concerns about dexterity, discomfort and film tearing (US 10,588,773) |
| Self-sealing adhesive film | Textured, adhesive-coated panels of the tail fold or roll together and can be peeled and resealed | Described as working when wet and as integral with the tail; no cycle-count data is given (US 10,588,773; US 12,102,553) |
How to choose: what the sources actually say
No regulator or standards body names a “right” closure, and the patents above are not buying guidance. What they do establish is a short list of functional requirements that any tail closure is designed to meet, which are useful as questions to put to a supplier or to the pouch’s own instructions for use:
- It must hold the tail shut without leaking.
- It must not open by accident.
- It must not cut, tear or damage the pouch film.
- The person using it must be able to operate it, including with limited hand dexterity, which is the problem the 1991 clip patent targets.
- It should be comfortable to wear, which is the concern the Convatec patents raise about rigid clips.
- It should be cleanable and work when wet, the points raised against hook-and-loop fasteners and in favour of the self-sealing film.
Whether a particular clip is supplied with a pouch, how many are included, and which clip fits which pouch are set by the manufacturer. Check the pouch’s own instructions for use or ask the person or service that supplies it; a clip designed for one pouch is not guaranteed to suit another.
Safe use and handling basics
The sources read for this page are a federal regulation and patents, not clinical guidance, so this section stays general. The stated design requirements are the practical guide to handling: a clip should close the tail fully and securely, and it should not be forced or used in a way that cuts or tears the film. Pouch-emptying routines, pouch-change intervals and any skin or stoma problem are matters for the person’s stoma care nurse or clinician and for the manufacturer’s instructions for use, not for a general reference page. Related accessories are covered in what ostomy scissors are and in the guide to the irrigation sleeve.
Common mistakes
- Assuming every pouch needs a clip. Closed pouches have no open tail to clip, and some drainable pouches use an integrated closure instead.
- Treating the clip as a regulated product on its own. The regulation names the pouch and its listed accessories; a tail clip is not on that list.
- Reading patent claims as test results. The statements about one-handed opening and comfort are what the inventors say their designs achieve. They are not comparative clinical findings.
Where to find ostomy supplies
Readers comparing related medical supplies can browse urology and incontinence supplies. For any pouch, its own instructions for use remain the authority on which closure it takes.
Frequently asked questions
What is an ostomy bag clip?
It is a fastener that closes the open tail of a drainable ostomy pouch. The classic design is a one-piece, hinged plastic clip that clamps the folded tail between two limbs and is held shut by catches (US 4,983,172).
What is an ostomy bag with a clip?
It is a drainable pouch whose tail is closed by a separate clip, as opposed to a pouch whose closure is built into the tail film, such as the self-sealing adhesive film described in Convatec’s patents.
Are ostomy clips reusable?
The hinged clip in the 1991 patent is designed to be opened and closed repeatedly with one hand. The sources read give no cycle-count or lifetime data, so reuse limits come from the manufacturer’s instructions for the specific product.
Are ostomy bag clips regulated by the FDA?
Ostomy pouches and their listed accessories are Class I devices under 21 CFR 876.5900, exempt from premarket notification subject to 21 CFR 876.9. A separate tail clip is not named in that regulation’s list.
Do all ostomy bags need a clip?
No. Closed pouches have no tail to close, and some drainable pouches have an integrated closure. Which applies depends on the pouch type described in its instructions.
Sources
- 21 CFR 876.5900, Ostomy pouch and accessories: law.cornell.edu/cfr/text/21/876.5900 (read 2026-11-12).
- US 4,983,172, Clip for drainable ostomy pouch (Kingsdown Medical Consultants): patents.google.com/patent/US4983172 (read 2026-11-12).
- US 10,588,773 (Convatec Technologies): patents.google.com/patent/US10588773 (read 2026-11-12).
- US 12,102,553 (Convatec Technologies): patents.google.com/patent/US12102553 (read 2026-11-12).
Data: Ostomy pouch tail closure types: how each closes and trade-offs stated in patents
Compares five ostomy pouch tail closure types by closing mechanism and the trade-offs stated in the background and description of US patents 4,983,172, 10,588,773 and 12,102,553. Compiled from patent text; statements are the patentees' own and not clinical test results.
| Closure type | How it closes | Trade-off stated in source |
|---|---|---|
| Hinged plastic clip | Two hinged limbs clamp the folded tail; catches hold it shut | Opens one-handed by design; described as rigid and as a separate item to handle |
| Hook-and-loop | Touch fastener on the tail | Difficult to wipe clean; fabric base absorbs liquids |
| Mushroom-projection fastener | Interlocking projections | Harder to manufacture; closing not readily intuitive |
| Rigid-backed closure | Rigid backing presses tail closed | Dexterity, discomfort and film-tearing concerns |
| Self-sealing adhesive film | Textured adhesive-coated tail panels fold or roll together; peelable and resealable | Described as working when wet and integral with the tail; no cycle-count data |
Sources
- 21 CFR 876.5900 Ostomy pouch and accessories (accessed 2026-11-12)
- US 4,983,172 Clip for drainable ostomy pouch (accessed 2026-11-12)
- US 10,588,773 Convatec Technologies (accessed 2026-11-12)
- US 12,102,553 Convatec Technologies (accessed 2026-11-12)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







