Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Pack size is the number of units a listed package contains, and the first thing to confirm is which level of packaging that number counts: a single item (each), an inner pack, or a case. A listing that says 50 can mean 50 items, 50 inner packs or 50 cases, and the total you pay for and store changes accordingly. This guide is general product and labelling information for people reading supply listings and purchase documents. It is not medical advice and does not recommend any product.
What "pack size" means: each, inner pack, case
Three packaging levels recur in supply catalogues. The GS1 Australia National Product Catalogue data dictionary describes them as hierarchical levels of a trade item and gives worked examples, summarised here (checked 2026-11-03).
| Level | What it is | Example pattern from the GS1 Australia dictionary | Unit count |
|---|---|---|---|
| Each (base unit) | The smallest unit sold | One 200 g item | 1 |
| Inner pack | A fixed group of eaches | 200 g x 12 | 12 eaches |
| Case | A fixed group of inner packs, or of eaches | 200 g x 12 x 4 | 48 eaches |
The dictionary’s healthcare example follows the same logic: a 100-tablet pack is the base unit, and a case of 40 of those holds 4,000 tablets. These are attribute-description examples from one national catalogue, not a rule that every supplier packs in three levels.
The regulatory wording behind a fixed quantity
For medical devices in the United States, 21 CFR 830.3 defines a device package as a package that contains a fixed quantity of a particular version or model of a device (checked 2026-11-03). The same section defines the device identifier (DI) as the mandatory, fixed part of a unique device identifier that identifies the labeler and the specific version or model of a device. The FDA’s UDI basics page describes the Global Unique Device Identification Database (GUDID) as holding only the device identifier for each device. The practical reading is that a pack size describes how many of one model are in the package, while the model identity is a separate question.
Case pack and case quantity: the same thing?
In supplier listings, case pack and case quantity are commonly used interchangeably for the number of sellable units in one outer case. Treat that as a convention, not a definition: the two phrases are not defined in the regulation or catalogue cited here, so read the number together with the unit it counts. A case pack of 12 where the unit is a box of 100 is 1,200 items, not 12.
How to read a listing
Listings often compress the pack information into shorthand. Common conventions are EA for each and CS for case, so "500 EA/CS" is generally read as 500 eaches per case, and "3/CS" as three units per case. Abbreviations vary between suppliers, so confirm the supplier’s own key before relying on one.
Convert every listing to the same unit before comparing:
- Find the unit the number counts (each, inner pack or case).
- Multiply through the levels, for example 12 per inner pack x 4 inner packs per case = 48 eaches per case.
- Compare suppliers only after both listings are expressed in the same unit, so that one figure is not counting cases while the other counts eaches.
Pack size, minimum order quantity, par level and kit contents
These terms are often confused because each involves a count, but they answer different questions.
- Pack size is how many units the package contains.
- Minimum order quantity is the least a supplier will sell in one order; see minimum order quantity (MOQ). It may be one case or several.
- Par level is the stock level a unit aims to keep on hand; see par level inventory. It is set by the user, not printed on the package.
- Kit contents are the different items assembled into one package; see what is kitting. A kit mixes models, while a device package under 21 CFR 830.3 holds a fixed quantity of one model.
What to confirm before ordering
- The unit the pack size counts, stated in words on the quote, not only as an abbreviation.
- That the model or version is the same across pack sizes. The FDA UDI basics page does not state whether each package level carries its own identifier, so check the label rather than assume it.
- That the pack count appears on the quote and the purchase order. For the document side, see purchase orders for medical supplies.
- Whether a minimum order quantity applies on top of the pack size.
Check your product’s labelling and the supplier’s own documentation for the pack quantity of the exact item you are ordering. Related reading: hospital supplier and, for a worked product example of a bulk pack, 4×4 gauze pads in bulk.
FAQ
What does pack size mean?
It is the number of units in a listed package. Under 21 CFR 830.3 a device package contains a fixed quantity of one version or model of a device, so the pack size describes that fixed count.
Is a case pack the same as a case quantity?
Listings commonly use them interchangeably for the number of units per outer case. Confirm the unit being counted before comparing two figures.
How many items are in a case of 12 inner packs of 100?
Multiply the levels: 12 x 100 = 1,200 items. The same method gives 12 x 4 = 48 in the GS1 Australia grocery example.
Does pack size appear in the FDA’s device database?
The FDA states that GUDID holds only the device identifier, which identifies the labeler and the model or version. It is not a source for pack counts, so read the label or supplier documentation.
Sources
- 21 CFR 830.3, Definitions (device package; device identifier), checked 2026-11-03: ecfr.gov, 21 CFR Part 830.
- U.S. FDA, UDI Basics, checked 2026-11-03: fda.gov UDI basics.
- GS1 Australia, National Product Catalogue data dictionary, trade item unit descriptor code (page last modified 2026-09-09), checked 2026-11-03: gs1au.org data dictionary entry.







