Written and maintained by CASRAI Editorial Board
Published
On this page
PARADIM is the Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials, a user facility funded by the U.S. National Science Foundation (NSF) as one of its Materials Innovation Platforms. It is hosted by Cornell University and Johns Hopkins University, and it gives approved researchers access to crystal growth, thin-film growth, electron microscopy, theory and simulation, and a shared data collective for new interface materials used in electronics.
Short answer
“PARADIM” is an acronym, not a misspelling of “paradigm.” It names a single NSF-funded national user facility under Cooperative Agreement No. DMR-2039380, run jointly by Cornell University and Johns Hopkins University. Outside researchers apply for access through a competitive, peer-reviewed process. Approved U.S. academic users are not charged; non-U.S. and industrial users pay a fee for service (paradim.org, read 2026-11-13).
Definition and scope
According to its own site, PARADIM helps users design and create interface materials, meaning materials that do not exist in nature, for next-generation electronics. The platform sits inside NSF’s Division of Materials Research (DMR), which funds a programme called Materials Innovation Platforms (MIP). NSF describes each MIP as a mid-scale infrastructure investment organised as a “scientific ecosystem”: in-house scientists, external users and other participants who share tools, codes, samples, data and know-how.
That distinction matters for how the platform is described in proposals and acknowledgements. A MIP is not a single instrument and not a conventional departmental core facility. NSF’s programme page says a MIP supports both external users and in-house research, and expects iterative, “closed-loop” work in which synthesis and processing, characterisation, and theory, modelling and simulation feed each other. The programme follows the aim of the Materials Genome Initiative to discover, manufacture and deploy advanced materials twice as fast and at a fraction of the cost (nsf.gov, read 2026-11-13). PARADIM is listed there alongside other MIPs, including 2DCC, BioPACIFIC and GlycoMIP.
How the platform is used in practice
PARADIM organises its capabilities around the same loop NSF describes. Its Bulk Crystal Growth Facility is located at Johns Hopkins University; the thin-film facilities are at Cornell. The site describes the thin-film capability as providing “unprecedented capability for the growth and characterization of thin films and interfaces of inorganic materials.” Electron microscopy is presented as the means of resolving the fine physical features that decide whether a new material works: interface structure, defects and strained thin films. Theory and simulation is called a critical part of PARADIM’s “Materials by Design” process, and the PARADIM Data Collective, with a data access portal, supports sharing of the resulting data.
The data table below compares the platform’s components, the host institution where the site states one, and what the site says each component does. Where the site does not name a host, the table says so rather than inferring one.
Electron microscopy at PARADIM includes electron ptychography work; see the guide to the most powerful microscope for how resolution records are defined and where PARADIM’s results fit.
Access and user programme: a checklist
The user programme page (paradim.org, read 2026-11-13) states the following. Treat it as a summary of the published rules on that date, and check the current page before planning a project.
- Basis of access: competitive and peer reviewed.
- Cost: approved U.S. academic users are free of charge; non-U.S. users and industrial users pay a fee for service, and industry has separate procedures.
- Review criteria: scientific opportunity, approach and significance; the applicant’s expertise and prior PARADIM work; suitability for PARADIM facilities; alignment with PARADIM’s focus on new interface materials; and the methods proposed for assessing material quality and applying materials-by-design.
- Decision time: applicants are notified within 4 to 8 weeks.
- Term: approved proposals cover one year.
- Acknowledgement: PARADIM’s site credits NSF and the platform under Cooperative Agreement No. DMR-2039380; the user-information pages list the required acknowledgement wording.
For research administrators, the award vehicle is worth noting: a cooperative agreement implies substantial NSF involvement, which differs from a standard grant. See grant vs contract vs cooperative agreement and the dictionary entry for cooperative agreement. Credit for the platform in publications is a separate question from authorship; acknowledgments vs authorship covers that line, and the acknowledgments section entry covers placement.
Funding history and current status
Cornell’s news office reported on 25 May 2021 that NSF had made a second award to PARADIM of $22.5 million over five years. The same report said the platform had hosted more than 170 users from 41 universities and national laboratories in its first five years and had produced 140 journal publications. It also listed training activities: a Research Experiences for Undergraduates (REU) programme, a weeklong summer school and traineeships for doctoral students at both universities (news.cornell.edu, read 2026-11-13). Those figures describe the first five-year period and the 2021 renewal, not the current state of the platform.
The PARADIM home page, read on 2026-11-13, carries a banner reading “Information on the future of PARADIM starting March 1, 2026” and links to a page about the future of the platform. The banner gives no detail on the home page, so applicants and administrators should read that linked page directly for the current status of the user programme.
Related concepts
PARADIM is easiest to place by comparing it with neighbouring terms. Each statement below comes from the sources cited above.
- Materials Innovation Platform (MIP): the NSF programme category. PARADIM is one platform within it.
- User facility: a facility that grants outside researchers access by proposal. Cornell’s news office describes PARADIM as a national user facility.
- Materials by Design: PARADIM’s term for using theory and simulation to guide which materials are made and measured.
- Interface materials: materials that do not exist in nature, in PARADIM’s description, designed and created for next-generation electronics.
Education, outreach and training
PARADIM is more than an instrument-access service. Its home page lists a Research Experiences for Undergraduates (REU) programme at Cornell and Johns Hopkins (listed for 2 June to 7 August 2026), summer schools, K-12 outreach and a Partnerships for Research and Education in Materials (PREM) activity. The 2021 Cornell report also described traineeships for incoming doctoral students at both universities and a planned summer and sabbatical programme with the Kavli Institute at Cornell for Nanoscale Science aimed at increasing diversity. For a research office, this matters because broader-impact and training commitments are part of how an NSF-funded platform is described, in addition to its research output.
How the closed loop maps onto the platform
NSF describes the MIP model as an iterative loop of synthesis and processing, characterisation, and theory, modelling and simulation, with data science engaged across the loop. Reading PARADIM’s own descriptions against that model gives a quick way to explain the platform to a new collaborator. Synthesis corresponds to the bulk crystal growth facility at Johns Hopkins and the thin-film growth facilities at Cornell. Characterisation corresponds to electron microscopy of interfaces, defects and strained thin films. Theory corresponds to theory and simulation under the Materials by Design heading. The data side corresponds to the PARADIM Data Collective and data access portal. The 2021 Cornell report adds that the platform was building capabilities in magnetic textures and quantum materials and investing in artificial intelligence and machine learning; it does not say these are current priorities, so the statement is dated to 2021.
The practical consequence of the loop design is that a proposal is not evaluated as a request for time on one machine. The review criteria listed above ask about suitability for PARADIM facilities and about methods for assessing material quality and applying materials-by-design, which fits a workflow in which growth, measurement and modelling are connected.
Citing and acknowledging the platform
Three identifiers are enough to describe the platform unambiguously in a methods section or a facility-use record: its full name, its two host institutions, and NSF Cooperative Agreement No. DMR-2039380. Use the exact acknowledgement wording that PARADIM’s user-information pages give rather than a paraphrase, because funder acknowledgement text is typically a condition of use. Because the home-page banner points to changes starting March 2026, confirm the award number and wording on the current page before submitting a manuscript.
Common misunderstandings
Is PARADIM only a Cornell laboratory?
No. PARADIM’s home page names both Cornell University and Johns Hopkins University as hosts and says the Bulk Crystal Growth Facility is at Johns Hopkins.
Is PARADIM a typo for “paradigm”?
No. It is the platform’s acronym. Searches for the word alone may also return the common noun “paradigm,” which is unrelated.
Is access always free?
No. The user programme page states that approved U.S. academic users are free of charge, while non-U.S. and industrial users are charged a fee for service.
Does approval last indefinitely?
No. The user programme page states that approved proposals cover one year.
Where it matters for labs and research offices
For a principal investigator, the practical question is whether a project fits PARADIM’s focus on new interface materials, since “alignment with new interface materials focus” is a stated review criterion. For a research office, the points to track are the one-year approval term, the 4 to 8 week decision window when scheduling grant timelines, the fee-for-service route for non-U.S. and industrial collaborators, and the award number needed in acknowledgements. Related reading on the site: materials science vs chemistry.
Frequently asked questions
What does PARADIM stand for?
Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials.
Who funds PARADIM?
The U.S. National Science Foundation, under Cooperative Agreement No. DMR-2039380, as one of its Materials Innovation Platforms.
Where is PARADIM located?
It is hosted by Cornell University and Johns Hopkins University. The Bulk Crystal Growth Facility is at Johns Hopkins.
How do researchers get access?
By submitting a proposal to the competitive peer-review process described on the PARADIM user programme page. Applicants are notified within 4 to 8 weeks.
Sources
- PARADIM home page, https://www.paradim.org/ (read 2026-11-13)
- PARADIM user programme, https://www.paradim.org/node/79 (read 2026-11-13)
- NSF, Materials Innovation Platforms, https://www.nsf.gov/funding/opportunities/mip-materials-innovation-platforms (read 2026-11-13)
- Cornell Chronicle, 25 May 2021, https://news.cornell.edu/node/321763 (read 2026-11-13)
Data: PARADIM platform components, stated hosts and described functions
Components of the PARADIM NSF Materials Innovation Platform as described on the platform's own home page, with the host institution where the page states one. Compiled 2026-11-13 from the platform site.
Period covered: 2026. Coverage: United States.
| Component | Host institution as stated | What the site says it does | Source URL |
|---|---|---|---|
| Bulk Crystal Growth Facility | Johns Hopkins University | Located at Johns Hopkins University; supports discovery of new materials and interfaces together with thin-film facilities | https://www.paradim.org/ |
| Thin Film Growth | Cornell University | Growth and characterization of thin films and interfaces of inorganic materials | https://www.paradim.org/ |
| Electron Microscopy | Not stated on home page | Resolving interface structure, defects and strained thin films | https://www.paradim.org/ |
| Theory and Simulation | Not stated on home page | Described as a critical part of the Materials by Design process | https://www.paradim.org/ |
| PARADIM Data Collective | Johns Hopkins University (linked under a /jhu/ path) | Listed with a data access portal; no further description on home page | https://www.paradim.org/ |
Sources
- PARADIM home page (accessed 2026-11-13)
- NSF Materials Innovation Platforms (accessed 2026-11-13)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







