Written and maintained by CASRAI Editorial Board
Published
This page describes products and general use; it is not medical advice.
On this page
The Prevena Incision Management System is a closed-incision negative pressure therapy (ciNPT) system engineered for surgical incisions that continue to drain following primary closure with sutures or staples. Manufactured by KCI USA, Inc. (3M Health Care / Solventum), the system applies continuous subatmospheric pressure directly over closed incisions to hold wound edges together, manage fluid exudate, and protect the surgical site from external contamination.
Who uses it: The system is utilized by surgeons, operating room nurses, surgical supply coordinators, and clinical procurement staff across orthopedic, cardiothoracic, vascular, plastic, and general surgical specialties.
What It Is
The Prevena Incision Management System is a single-patient medical device designed for closed surgical incisions in the immediate post-operative period. Unlike conventional negative pressure wound therapy (NPWT) systems that treat open, cavitary wounds, Prevena is applied over surgically closed incisions immediately after closure in the operating suite.
The system maintains a sealed sterile environment over sutured or stapled incisions while continuously removing fluids through controlled negative pressure. Under U.S. Food and Drug Administration (FDA) 510(k) clearances (including K100821 and K190697), Prevena is classified under 21 CFR 878.4780 as a Class II powered suction pump (Product Code OMP). Sourcing coordinators can verify the manufacturer’s regulatory registration via the FDA registered establishment database.
How It Works and How It Is Built
Prevena delivers continuous subatmospheric pressure at -125 mmHg across the closed incision and adjacent tissue. This negative pressure holds incision edges together, removes collected fluids into an external canister, and maintains an occlusive barrier against pathogens.
The system consists of four primary components:
- Therapy Unit: A battery-powered portable pump (such as the Prevena Plus 125) delivering continuous negative pressure at -125 mmHg, equipped with audible and visual alerts for air leaks, low battery, and full canisters.
- Dressing: A sterile multilayer dressing with an adhesive polyurethane drape outer shell acting as a microbial barrier, and a porous polyurethane or polyester interface layer (available non-silver or with 0.019% ionic silver to reduce bacterial colonization within the dressing).
- Canister: A sterile, single-use collection canister (45 mL standard or 150 mL Prevena Plus) containing a hydrophobic filter to protect the pump from fluid ingress.
- SENSAT.R.A.C. Tubing: Integrated tubing with pressure-sensing lumens that monitor subatmospheric pressure directly at the dressing and adjust pump operation.
Types and Variants
The Prevena platform provides several dressing designs for varying incision configurations. When addressing hospital supply constraints, procurement teams should follow an approved product substitution protocol prior to exchanging dressing styles.
| System / Dressing Type | Typical Surgical Use | Key Structural Difference |
|---|---|---|
| Prevena Peel & Place | Linear incisions (arthroplasty, sternotomy, laparotomy) | Integrated, one-piece linear dressing with peel-and-place adhesive backing; available in 13 cm, 20 cm, and 35 cm lengths. |
| Prevena Plus Customizable | Curved, non-linear, or intersecting incisions (panniculectomy, complex flaps) | Trimmable polyurethane foam bolster and occlusive drape adapted to irregular incision geometries. |
| Prevena Plus Duo | Bilateral procedures (bilateral knee arthroplasty, bilateral mastectomy) | Dual Peel & Place dressings connected via Y-tubing to a single Prevena Plus 125 therapy unit. |
| Prevena Restor Series | Anatomical sites requiring wider tissue stabilization (breast, knee, ankle) | Expanded soft-tissue coverage dressings (Bella•Form, Arthro•Form, Roto•Form, Axio•Form) covering the incision and adjacent tissue. |
Sizes and Specifications That Matter
Selecting appropriate Prevena dressings requires matching incision length and anatomical geometry. Clinical supply managers should confirm supply backorder timelines with distributors when stocking specialized sizes.
| Model / Component | Dimensions / Sizing | Operating Pressure | Wear Duration | Classification & Billing |
|---|---|---|---|---|
| Peel & Place 13 cm | Linear incisions up to 13 cm | -125 mmHg continuous | Up to 7 days | FDA Class II (OMP), HCPCS A9272 |
| Peel & Place 20 cm | Linear incisions up to 20 cm | -125 mmHg continuous | Up to 7 days | FDA Class II (OMP), HCPCS A9272 |
| Peel & Place 35 cm | Linear incisions up to 35 cm | -125 mmHg continuous | Up to 7 days | FDA Class II (OMP), HCPCS A9272 |
| Prevena Restor Bella•Form | 21 cm × 19 cm, 24 cm × 22 cm, 29 cm × 27 cm | -125 mmHg continuous | Up to 14 days (per IFU) | FDA Class II (OMP), HCPCS A9272 |
| Prevena Restor Arthro•Form | 33 cm × 30 cm, 46 cm × 30 cm | -125 mmHg continuous | Up to 14 days (per IFU) | FDA Class II (OMP), HCPCS A9272 |
| Standard Canister | 45 mL volume | N/A (collection vessel) | Single-patient use | Component of A9272 kit |
| Prevena Plus Canister | 150 mL volume | N/A (collection vessel) | Single-patient use | Component of A9272 kit |
How to Choose
Clinicians and supply coordinators evaluate specific criteria documented in manufacturer instructions and clearances:
- Incision Geometry: Straight closures utilize linear Peel & Place dressings (13 cm, 20 cm, or 35 cm). Contoured or non-linear incisions require Customizable or Restor dressings.
- Fluid Volume: Standard 45 mL canisters accommodate low-exudate incisions; 150 mL canisters are indicated for high-fluid drainage or extensive dissections.
- Single vs. Bilateral Incisions: Bilateral surgeries require Prevena Plus Duo kits with Y-connectors and paired dressings.
- Silver Sensitivity: Non-silver (No Ag) versions must be selected for patients with known silver allergies.
- Supply Verification: Procuring through an authorized medical distributor ensures validated lot tracking, sterile seal integrity, and manufacturer warranty coverage.
Safe Use and Handling Basics
Prevena systems are prescription devices operated under clinical protocols:
- Operating Parameters: Applied in the operating room immediately after closure; maintains continuous -125 mmHg negative pressure for up to 7 days (or up to 14 days for Restor models).
- Contraindications: Contraindicated over active bleeding, untreated osteomyelitis, necrotic tissue, or exposed vascular structures/anastomoses. Silver dressings are contraindicated in patients with silver hypersensitivity.
- System Alerts: Flashing indicators and audible tones signal air leaks, full canisters, or low battery. If leaks occur, sealing strips are applied around dressing edges to restore subatmospheric pressure.
- Disposal: All components (therapy unit, canister, dressing) are single-patient use and must be discarded according to institutional biohazard and electronic waste procedures.
Common Mistakes
- Applying to Open Cavity Wounds: Prevena is intended only for primarily closed incisions, not open granulating wounds requiring traditional cavity NPWT.
- Improper Peeling During Removal: Pulling dressings perpendicular to the skin creates stress on healing tissue; dressings must be peeled back gently parallel to the incision line.
- Submerging the Unit: Submerging the therapy pump or canister in water damages the electronics and breaks the dressing seal.
- Reusing Disposable Canisters: Reusing single-use canisters compromises the hydrophobic filter and risks infection.
- Ignoring Alert Warnings: Unresolved air leaks dissipate negative pressure, leaving an unvented occlusive cover over the wound.
Frequently Asked Questions
What is a Prevena wound dressing?
A Prevena wound dressing is a sterile, single-use, multilayer dressing applied over closed surgical incisions. It features an outer polyurethane adhesive film acting as a bacterial barrier and an inner wicking foam layer (with or without ionic silver) that transfers exudate to a canister under continuous -125 mmHg negative pressure.
How to use Prevena wound vac?
Prevena is applied by clinical staff immediately post-closure. The skin is cleansed and dried, the dressing centered over the incision, adhesive liners removed, and the drape smoothed down. Tubing connects the dressing to the canister on the therapy unit, and the power button is activated to initiate -125 mmHg continuous suction.
Can you shower with a Prevena wound vac on?
Showering is permitted only when approved by the attending surgeon. If cleared, patients may take brief, gentle showers while keeping the therapy unit and canister completely away from direct water spray. Neither the dressing nor the unit may ever be submerged in water or used in baths.
How is Prevena removed?
Prevena is removed by a healthcare provider after powering off the unit completely by pressing and holding the power button. The provider loosens the adhesive edges and slowly peels the dressing back parallel to the incision line, avoiding upward or perpendicular pull on the wound margins.
Sources
- U.S. Food & Drug Administration (FDA): 510(k) Premarket Notification K190697, PREVENA PLUS Incision Management System (No Ag), cleared November 22, 2019; 21 CFR 878.4780 (Product Code OMP). Read 2026-11-07.
- U.S. Food & Drug Administration (FDA): 510(k) Premarket Notification K100821, PREVENA Incision Management System, cleared June 11, 2010. Read 2026-11-07.
- FDA openFDA & AccessGUDID: Unique Device Identifier (UDI) listings for Prevena Peel & Place, Prevena Restor, and Prevena Plus 125 units, U.S. FDA. Read 2026-11-07.
- Solventum / 3M Health Care: Prevena Incision Management System Clinician Guide and Patient Information, Operating Parameters, Contraindications, and Sizing Specifications. Read 2026-11-07.
- Centers for Medicare & Medicaid Services (CMS): Healthcare Common Procedure Coding System (HCPCS) Code Set, Codes A9272 and E2402. Read 2026-11-07.







