Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
The Queen Square hammer is a reflex hammer with a round, ring-wrapped head on a long, light handle. It is named for Queen Square in London, so “queen square hammer” and “queens square hammer” are the same instrument. This page covers where the design came from, how it is built, how it differs from the Taylor and Babinski-Rabiner styles, and how it is classed as a device in the United States.
What a Queen Square hammer is
A Queen Square hammer is a percussor: a small hammerlike device a physician uses to give light blows to a body part during a physical examination. Its distinguishing feature is a circular head wrapped in a ring, mounted on a long handle. Its name is a tribute to the National Hospital for Nervous Diseases at Queen Square, where it was invented around 1925 (PMC10169229, checked 2026-10-31).
Who uses it: neurologists and other clinicians who examine tendon reflexes. A history of reflex hammers calls it the reflex hammer of choice of UK neurologists.
Where the design came from
The Queen Square hammer was developed around 1925 and was based on Vernon’s hammer, an earlier model by the physician Henry Vernon (PMC10169229).
It was invented by Miss Wintle, head nurse of the hospital’s physiotherapy and radiology service. She wrapped a brass disk with a ring-shaped pessary and secured it to a bamboo rod, giving a hammer described as dense, flexible, lightweight and painless (PMC10169229).
How it is built
| Part | Original (c. 1925) | Today |
|---|---|---|
| Head | Brass disk wrapped with a ring-shaped pessary | Round head with a ring around the edge (see the maker’s product information for the exact material) |
| Handle | Bamboo rod | Usually plastic |
| Overall length | Longer than the Babinski hammer | Longer than the Babinski hammer |
Source: PMC10169229 (checked 2026-10-31), for the materials, the plastic handle and the length comparison with the Babinski hammer.
Queen Square vs Taylor vs Babinski-Rabiner
| Hammer | Origin | Distinguishing build |
|---|---|---|
| Queen Square | About 1925, London, based on Vernon’s hammer | Brass disk with a ring, bamboo handle originally; longer handle, plastic today |
| Taylor | 1888, United States | Triangular rubber head; short, flattened handle |
| Babinski-Rabiner | Babinski hammers 1912, France; Rabiner modification 1920 | Disc-like head with a rubber ring; Rabiner’s change made the head articulable so it can be used parallel or perpendicular to the handle; shorter, metallic handle than the Queen Square |
Source for every row: PMC10169229 (checked 2026-10-31). For more on the other styles, see our guides to the Taylor hammer, the Tromner reflex hammer, and reflex hammers in general.
The same history concludes that no single model has been proven superior to the others and that the choice is left to the neurologist. In an online survey of Brazilian neurologists, the Queen Square hammer was the second most chosen (108 votes, 19.3%) after the Babinski-Rabiner (257 votes, 46%). That is a national survey result, not a worldwide figure.
Is it a regulated device?
In the United States a percussor is defined in 21 CFR 882.1700 as “a small hammerlike device used by a physician to provide light blows to a body part” and is described as a diagnostic aid during physical examinations. It is a Class I device (general controls). It is exempt from premarket notification (510(k)), subject to the limitations in 21 CFR 882.9, and exempt from the current good manufacturing practice requirements of the quality management system regulation in part 820, except for the records and complaint-file requirements of 820.35. (Regulation text checked 2026-10-31 via Cornell LII, 21 CFR 882.1700.)
A Queen Square hammer sold for the same examination use falls under the same percussor description. The regulation does not set a size, weight or head material.
Handling basics
- Cleaning agents and care are set by the manufacturer’s instructions for each product.
- Facilities apply their own infection-prevention policies to reusable instruments.
Common mistakes
- Treating “Queen Square” and “Queens Square” as two different products. They are one design.
- Assuming a Queen Square hammer is a Taylor hammer. They differ in head, handle and length (table above).
- Reading the Brazilian survey percentages as a worldwide market share.
FAQ
What is a Queen Square hammer?
A reflex hammer with a round, ring-wrapped head on a long handle, invented around 1925 at the National Hospital for Nervous Diseases, Queen Square, London.
Is it “queen square hammer” or “queens square hammer”?
Both spellings refer to the same instrument, named for Queen Square in London.
Who invented it?
Miss Wintle, the hospital’s head nurse of physiotherapy and radiology, based on Vernon’s hammer.
Is a Queen Square hammer an FDA-regulated device?
Yes. As a percussor it is a Class I device under 21 CFR 882.1700, exempt from 510(k) with limitations.
Where can I see percussors and diagnostic instruments?
Browse the diagnostic, monitoring and imaging category at lac.us.
Sources
- 21 CFR 882.1700, Percussor: https://www.law.cornell.edu/cfr/text/21/882.1700 (checked 2026-10-31).
- History and national survey on reflex hammers, PMC10169229: https://pmc.ncbi.nlm.nih.gov/articles/PMC10169229/ (checked 2026-10-31).







