Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
scrbook is the book class of the KOMA-Script bundle for LaTeX. It is a drop-in replacement for the standard book class: change \documentclass{book} to \documentclass{scrbook} and the document should normally compile as before, with a different layout. Researchers most often reach for it to typeset a thesis, dissertation or monograph with better control of margins, binding allowance and chapter headings. This guide shows the switch, the options that matter most for a thesis, and what to do when a package complains.
What scrbook is used for in research
KOMA-Script replaces the three standard document classes and the letter class with its own: article becomes scrartcl, report becomes scrreprt, book becomes scrbook and letter becomes scrlttr2 (KOMA-Script guide, table 3.1, preface to version 3.49.3). scrbook is the right pick when the work has chapters and a front matter, main matter and back matter structure, which covers most theses and edited volumes. For a shorter paper with no chapters, scrartcl is the matching class; this page covers only scrbook.
The bundle is distributed under the LaTeX Project Public License 1.3c. As checked on CTAN on 2026-11-08, the current release is 3.49.3, dated 2026-10-19. For the wider workflow around a thesis source file, see the CASRAI guide to the LaTeX document.
How to install or access it
The bundle is listed on CTAN as koma-script (ctan.org/pkg/koma-script), and CTAN shows it as included in both TeX Live and MiKTeX under the package name koma-script. If you use a full TeX distribution you therefore already have scrbook; the class is loaded by name and needs no separate download. The official documentation is the English KOMA-Script guide (scrguide-en.pdf); a German edition is also provided on CTAN.
Step-by-step: switch a thesis to scrbook
- Replace the class. Change
\documentclass{book}to\documentclass{scrbook}. The guide states that LaTeX should normally process the document without errors after this change, but the layout will differ. KOMA-Script classes use A4 paper by default. - Add the binding correction. The
BCOR=option takes the absolute width lost to binding, in any TeX unit, and adds it to the inner margin. The guide’s own example for a report is\documentclass[BCOR=8.25mm]{scrreprt}; for a book you write\documentclass[BCOR=8.25mm]{scrbook}. Measure your own binding allowance with your printer or bindery rather than copying the number. - Choose the type area. The
DIV=option sets the number of strips the page is divided into horizontally and vertically: the larger the factor, the larger the text block and the smaller the margins. Any integer greater than 4 is allowed.DIV=calcasks KOMA-Script to compute a suitable factor from the paper and font size. - Set options after loading with
\KOMAoptions.\KOMAoptions{option list}sets options once the class is loaded, for example\KOMAoptions{BCOR=8.25mm}. ChangingBCORorDIVthis way recalculates the type area. - Structure the thesis.
scrbookprovides\frontmatter,\mainmatterand\backmatter, each with an optional numbering style argument. Use\addchap{Preface}for an unnumbered chapter that still appears in the table of contents;\chapter*and\addchap*also exist for unnumbered chapters. - Review heading and paragraph options. Set
open=right(the default in two-sided printing) to start every chapter on a right-hand page, oropen=leftoropen=any; it has no effect in one-sided printing. Useparskip=fullorparskip=halfto replace paragraph indentation with vertical spacing.
\documentclass[BCOR=8.25mm, DIV=calc]{scrbook}
\begin{document}
\frontmatter
\addchap{Preface}
\tableofcontents
\mainmatter
\chapter{Introduction}
\backmatter
\end{document}
The skeleton uses only constructs described above; the 8.25 mm value is the guide’s example, not a recommendation.
Output and how to read it
Compare the new PDF with the one built under book. Expect three visible differences. Margins follow the KOMA type area rather than the standard class geometry. Chapter headings no longer carry a separate “Chapter” line: the standard book and report classes print that line, whereas in KOMA-Script the default is chapterprefix=false (and likewise appendixprefix), the opposite of the standard classes. And with two-sided printing, chapters begin on the next right-hand page by default. If you need the old chapter prefix, set chapterprefix to true.
Troubleshooting
Errors or warnings on the first run after switching
Some packages are built on internals of the standard classes. The first compile after the switch can therefore produce errors or warnings from those packages. The KOMA-Script guide points to the scrhack package as a way to help in such cases.
DIV=calc gives the wrong result after a font change
Options given to \documentclass are evaluated before later packages load. If a font package is loaded after \documentclass, put \KOMAoptions{DIV=calc} after loading the font so the type area is calculated with the font you actually use.
Margins changed unexpectedly
The binding correction is added to the inner margin, so a large BCOR value narrows the text block unless the type area is recalculated. Re-set the option with \KOMAoptions and check the output.
Standard classes and their KOMA-Script replacements
KOMA-Script is free to use under the LPPL, so the practical question is which class pairs with the one you already use.
| Standard class | KOMA-Script replacement | Typical use |
|---|---|---|
book |
scrbook |
Books, theses with chapters |
report |
scrreprt |
Reports with chapters |
article |
scrartcl |
Articles without chapters |
letter |
scrlttr2 |
Letters |
Source: KOMA-Script guide, table 3.1 (version 3.49.3).
FAQ
Can I just replace book with scrbook?
Yes. The guide says \documentclass{book} can be replaced with \documentclass{scrbook} and that the document should normally process without errors, although the layout will differ.
Does scrbook need a separate installation?
Not if you use TeX Live or MiKTeX, where CTAN lists the bundle as the koma-script package.
What is the default paper size?
A4 for all KOMA-Script classes, according to the guide.
How do I leave out the “Chapter” label on headings?
You do not need to: chapterprefix=false is the KOMA-Script default.
How do I add a preface or other unnumbered chapter?
Use \addchap{Title} for an unnumbered chapter that is listed in the table of contents, or \chapter*{Title} for one that is not.
Sources
- CTAN, KOMA-Script bundle: ctan.org/pkg/koma-script (read 2026-11-08).
- KOMA-Script guide, English, version 3.49.3: scrguide-en.pdf (read 2026-11-08).
Related CASRAI guides: appendices in LaTeX, the thebibliography environment, LaTeX bibliography styles and collaborative writing in Overleaf.







