Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
A shoulder drape is a sterile surgical drape shaped for shoulder surgery and arthroscopy. It covers the patient and the surrounding field, usually with an opening (fenestration) at the surgical site and, on many designs, a built-in pouch that collects irrigation fluid. It belongs to the same product family as extremity, hip and knee arthroscopy drapes. In US regulation there is no separate entry for it: it falls under the general surgical drape classification, Class II.
What a shoulder drape is
Under 21 CFR 878.4370, a surgical drape is a device made of natural or synthetic materials intended to be used as a protective patient covering; its purpose is to isolate a surgical incision site from microbial and other contamination. A shoulder drape is that device configured for the shoulder region. The regulation does not name orthopedic or shoulder drapes individually, so they are treated under the generic surgical drape entry.
Who uses it: operating-room and ambulatory surgery staff who set up orthopedic and sports-medicine cases, and the buyers and students who need to identify which drape belongs to which procedure. For related set-up items see arm board and physician preference items.
How it is built
- Fenestration. The opening over the surgical site. Lohmann and Rauscher describes the fenestration on its extremity drapes as elastic and on its shoulder beach-chair drape as an elastic, pear-shaped opening measuring 11.5 x 12.5 cm.
- Fluid collection pouch. Arthroscopy involves irrigation fluid. Lohmann and Rauscher’s shoulder beach-chair drape has an integrated fluid collection pouch with a drainage port. Hartmann’s separate shoulder arthroscopy pouch is made of transparent polyethylene in a U-shaped design with an adhesive area, a cushioning foam insert and two connecting sockets for suction tubes.
- Adhesive area. Lohmann and Rauscher marks the adhesive side of its arthroscopy drapes so users can tell which side carries the adhesive area.
- Fixation. The same shoulder beach-chair drape carries three hook-and-loop fasteners.
Shoulder, extremity, hip and arthroscopy drapes: how the names relate
These are not four unrelated products. “Arthroscopy drape” describes the procedure type (a drape or set for arthroscopic surgery, with fluid management). “Shoulder,” “hip,” “knee” and “extremity” describe the body region the drape is shaped for. A manufacturer may sell a shoulder arthroscopy set, a hip arthroscopy set and a general extremity drape in the same product line. Lohmann and Rauscher lists a hip arthroscopy set in its range; no hip drape dimensions are stated here.
Types listed by manufacturers
| Type | Typical use | Key difference (as listed) | Source |
|---|---|---|---|
| Shoulder beach-chair drape (REF 33355 set) | Shoulder arthroscopy | Elastic pear-shaped fenestration 11.5 x 12.5 cm; integrated fluid pouch with drainage port; three hook-and-loop fasteners | Lohmann and Rauscher |
| Shoulder arthroscopy pouch (foliodrape, Art. 258128) | Fluid collection in shoulder arthroscopy | Transparent polyethylene, U-shaped, adhesive area, foam insert, two suction-tube sockets; sold as an accessory | Hartmann |
| Split sheet with slit (PRO Shoulder Arthroscopy Set I) | Shoulder arthroscopy | Two-layered split sheet with a slit (10 x 100) rather than a fenestrated drape | Lohmann and Rauscher |
| Extremity drape (PRO Arthroscopy Sets) | Limb procedures | Elastic fenestration | Lohmann and Rauscher |
| Knee drape (REF 33086) | Knee arthroscopy | Two fenestrations (6 cm and 7 cm), pouch, integrated tube fixations | Lohmann and Rauscher |
Sizes listed by manufacturers
| Product | Listed size | Source |
|---|---|---|
| Shoulder beach-chair drape, REF 33355 set | 225 x 380 cm | Lohmann and Rauscher |
| Split sheet, PRO Shoulder Arthroscopy Set I | 225 x 260 cm | Lohmann and Rauscher |
| Extremity drape, PRO Arthroscopy Sets | 200 x 300 cm (SMART set: 200 x 280 cm) | Lohmann and Rauscher |
| Knee drape, REF 33086 | 225 x 320 cm | Lohmann and Rauscher |
| Shoulder arthroscopy pouch, Art. 258128 | 85 x 74 cm, pack of 10, individually wrapped, sterile | Hartmann |
These are two manufacturers’ catalog values, not a standard size. Dimensions differ by maker and set.
FDA classification and what it means
- Surgical drapes are Class II (special controls) under 21 CFR 878.4370.
- Certain drape types are exempt from 510(k) premarket notification, subject to the limits in 21 CFR 878.9: ENT drapes, latex sheet drapes with finger cot, disposable urological drapes, Kelly pads, ophthalmic patient and microscope drapes, internal drape retention rings, and surgical drapes that do not contain an antimicrobial agent.
- A drape that does contain an antimicrobial agent is not in that exempt list.
The regulation text is the 2025-04-01 eCFR version; it cites 53 FR 23872 (June 24, 1988) and the amendment at 84 FR 71814 (December 30, 2019).
Safe use and handling basics
- Manufacturers list their shoulder and arthroscopy drapes and sets as sterile; the Hartmann pouch is individually wrapped. Follow the manufacturer’s instructions for use and your facility’s sterile-technique policy.
- Use the product for the purpose its maker states. The Hartmann pouch, for example, is stated for fluid collection in shoulder arthroscopy.
For sterile versus non-sterile product categories in general, see sterile vs non-sterile purchasing.
Common mistakes
- Treating “arthroscopy drape,” “extremity drape” and “shoulder drape” as separate product classes. They are one family, named by procedure and by body region.
- Assuming one size fits all. The sizes above range from 85 x 74 cm for a pouch to 225 x 380 cm for a full beach-chair drape.
- Assuming every drape needs FDA 510(k) clearance. Several drape types, including drapes without an antimicrobial agent, are on the exempt list.
- Confusing an accessory pouch with a full drape. The Hartmann product is sold as an accessory.
FAQ
What is a shoulder drape used for?
It is a sterile covering for the patient during shoulder surgery or arthroscopy, isolating the incision site from contamination; many designs add a pouch for irrigation fluid.
Is a shoulder drape the same as an arthroscopy drape?
Often in practice. “Shoulder” names the body region and “arthroscopy” names the procedure; a shoulder arthroscopy drape is both.
How does the FDA regulate a shoulder drape?
As a surgical drape under 21 CFR 878.4370, Class II, with some drape types exempt from 510(k).
Sources
- FDA, 21 CFR 878.4370, Surgical drapes and drape accessories (eCFR, 2025-04-01 text), ecfr.gov, checked 2026-11-01.
- Hartmann, foliodrape Shoulder Arthroscopy Pouches (Art. 258128), hartmann.info, foliodrape Shoulder Arthroscopy Pouches, checked 2026-11-01.
- Lohmann and Rauscher, Raucodrape Arthroscopy Drapes (REF 33350-33355, 33851, 33086, 33348), lohmann-rauscher.com, Raucodrape Arthroscopy Drapes product page, checked 2026-11-01.







