Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product information for supply and equipment staff, not medical advice and not a procedure guide. Handling a patient is governed by your service’s approved protocols and the manufacturer’s instructions for use (IFU).
Short answer
Stretcher straps are the restraint straps that hold a patient to a stretcher, backboard or scoop stretcher during transport. “Spider straps” and “backboard straps” name the same family. The detail that matters most is in the IFU: one widely documented system, the Ferno Model 770 Fastrap, is limited to horizontal transport devices and is not for ambulance cots or vertical extrication.
Definition and scope
In US device regulation the strap is treated as a feature of the transport device, not as a separate product code of its own. The FDA’s wheeled stretcher entry, 21 CFR 880.6910, identifies a wheeled stretcher as “a platform mounted on a wheeled frame that is designed to transport patients in a horizontal position” and says the device “may have side rails, supports for fluid infusion equipment, and patient securement straps.” It is Class II (special controls) and exempt from premarket notification subject to 21 CFR 880.9 (text on Cornell LII, checked 2026-11-01).
In everyday supply language the names overlap:
- Stretcher straps is the broad term for restraint straps used with stretchers and cots.
- Backboard straps are straps sold or specified for use with a backboard.
- Spider straps is a trade name for a multi-strap harness whose body straps meet at a central strap; the Ferno IFU describes its product as a system of hook-and-loop straps for “quick restraint of a patient on a horizontal transport device such as a backboard or scoop stretcher.”
This page does not cover behavioural restraints, which have a different purpose; see medical restraints.
How straps are used in practice
The Ferno Model 770 Fastrap Users’ Manual (Pub. No. 234-1699-01, December 2006) is a useful worked example because it states its limits plainly. All points below are that one manufacturer’s statements, not rules for every strap set.
- Horizontal devices only. The manual says not to use the Fastrap “to secure a patient on an ambulance cot or for vertical extrication,” and to use or add restraints rated for those situations.
- Professional use, trained operators. It is “for professional use only,” and the manual says to permit only trained personnel to apply it. Trainees follow a training plan, practise before regular service, and keep training records.
- Condition. It is to be used only when in good condition and only as the manual describes.
- Two load limits. The Fastrap is rated to 1000 lb (454 kg), but a footnote warns that this “may be higher than the load limit of the equipment it is used on” and that the equipment’s limit must not be exceeded. The lower rating governs.
Types and components: one manufacturer’s example
The table lists the components of the Ferno Model 770 Fastrap with the lengths and placements given in its manual. Other manufacturers’ sets differ in strap count, length, closures and colours.
| Component (colour) | Where the manual places it | Listed length |
|---|---|---|
| V-strap (black) | Over the shoulders | 62 in / 157 cm overall; 31 in / 79 cm each side |
| Chest strap (orange) | Across the chest | 66 in / 168 cm |
| Pelvic strap (yellow) | Across the pelvis | 66 in / 168 cm |
| Thigh strap (green) | Above the knees | 66 in / 168 cm |
| Ankle strap (gray) | Near the ankles | 46 in / 117 cm (listed as “Foot” in the specifications) |
| Wrist restraint | Listed as a wrist restraint component | 21 in / 53 cm |
| Center strap | Joins the body straps; three adjustment points | Not listed |
The same manual describes the system as adjustable for pediatric and adult patients through the center strap’s adjustment points, with a listed weight of 2 lb (689 g). Its closures are hook-and-loop.
Where it matters for labs, clinics and supply decisions
For staff who stock or inspect transport equipment, the IFU points to a short checklist. Each line reflects a statement in the Ferno manual; confirm the equivalent line in the IFU of the set you actually hold.
- Match the strap to the device. Check that the IFU names the device type in use (backboard, scoop stretcher, cot).
- Compare the two ratings. The strap load limit and the stretcher or backboard load limit are separate numbers; the equipment’s limit must not be exceeded.
- Disinfect and clean by the book. The manual’s minimum schedule is disinfecting each use, cleaning as needed, and inspection as needed and at least once a month. Disinfectants and cleaners containing bleach, phenolics or iodines “can damage the Fastrap.” Cleaning is a machine wash in cold water with mild detergent, with the strap in a pillowcase, then air drying; “Do not machine dry,” because that can shrink or damage it.
- Inspect for specific damage. Look for lint or debris on the hook-and-loop material, torn or frayed straps and broken D-rings; the manual says to remove a damaged or excessively worn set from service. It also says to inspect the Fastrap if its load limit has been exceeded.
For the disinfectant side, see the guide to surface disinfectant selection and material compatibility. For the stretcher and backboard themselves, see backboards and stretchers, what a gurney is and how FDA classifies it, and OSHA first-aid kit stocking.
Common misunderstandings
“Spider straps and stretcher straps are different products.”
The names overlap. “Spider” describes a multi-strap harness style, while “stretcher straps” and “backboard straps” describe the device they are used with.
“A strap rated higher than the stretcher raises the stretcher’s capacity.”
It does not. The Ferno manual states that the strap’s rating may exceed the equipment’s and that the equipment’s load limit must not be exceeded.
“Any strap set works on any transport device.”
The Fastrap IFU excludes ambulance cots and vertical extrication. Another set may have different limits; the IFU decides.
“Any cleaner is fine for nylon straps.”
This manual warns that bleach, phenolic and iodine products can damage the set, and that machine drying can shrink or damage it.
FAQ
What are spider straps?
Spider straps are a multi-strap restraint harness for a patient on a backboard or similar horizontal device; Ferno’s version consists of hook-and-loop straps for shoulders, chest, pelvis, thighs and ankles joined by a center strap.
Does the FDA regulate stretcher straps?
Straps appear in the FDA’s identification of the wheeled stretcher (21 CFR 880.6910) as “patient securement straps.” That device is Class II and exempt from premarket notification, subject to 21 CFR 880.9. The regulation text does not set strap dimensions or strength.
Can the same straps be used on an ambulance cot?
Not under the Ferno Model 770 IFU, which says not to use it on an ambulance cot or for vertical extrication. Check the IFU for any other set.
How are reusable straps cleaned?
For the Ferno Fastrap: disinfect each use with a product free of bleach, phenolics and iodines, machine wash cold in a pillowcase with mild detergent when cleaning is needed, and air dry. Other makers’ instructions can differ.
Sources
- Ferno-Washington, Inc., Model 770 Fastrap Restraint System Users’ Manual, Pub. No. 234-1699-01, December 2006 (PDF, checked 2026-11-01): manufacturer PDF.
- 21 CFR 880.6910, Wheeled stretcher (checked 2026-11-01): law.cornell.edu/cfr/text/21/880.6910.







