Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop switch access supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Switch Access: Adaptive Switches, Scanning and Sip and Puff

Switch access explained: how scanning works, mechanical and electrical adaptive switch types including sip and puff, and what to check on an order.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

Switch access is a way of operating a computer, phone or other device with one or more switches instead of a touchscreen, mouse or keyboard. The device presents its choices one at a time (scanning), and the user presses a switch when the wanted choice is highlighted. This page explains the pieces, so that clinic, rehabilitation and supply staff can tell a switch, its connection and its scanning setup apart. It is general product information, not medical advice or a substitute for an assessment.

Short answer

Switch access lets a person with very limited movement control a device through a small number of switch presses. Google describes its Android feature this way: it “scans the items on your screen, highlighting each item in turn, until you make a selection.” An adaptive switch is the physical (or sensor-based) input that sends the press. Sip and puff is one type of adaptive switch. Choosing and positioning a switch is normally done with a therapist or assistive technology specialist.

Definition and scope

The Colorado Assistive Technology Act Program (University of Colorado Denver) says switches “enable individuals with significantly limited movement to operate computers, home controls, wheelchairs, communication devices, recreational equipment and much more.” A switch can directly control a simple device such as a lamp, or, together with a scanning system, control more complex technology such as computers or mobile devices.

“Switch access” therefore names a whole arrangement rather than one product: an input (the switch), a way of connecting it to the device, and software that scans the choices.

How switch access works in practice

The Colorado program defines scanning as “the systematic presentation of choices to the user”; when the wanted choice is presented, the person presses the switch to select it. Scanning software exists for computers, mobile devices, environmental control systems and wheelchairs, among other technology.

The program lists these scanning approaches by name:

  • Techniques: automatic, inverse and stepped scanning.
  • Patterns: linear, row/column and quadrant scanning.

On Android, Google’s help page says Switch Access needs “one or more switches”. It lists three ways to supply them: an external switch device that sends a keystroke signal and connects by USB or Bluetooth; an external USB or Bluetooth keyboard whose keys are assigned to actions; or the phone’s own buttons such as the volume keys. Google names several vendors on that page and states that it does not endorse them or their products.

Types of adaptive switches

The Colorado program sorts switches into two broad types. Its own wording: a mechanical switch has a physical actuator and generally requires a certain amount of physical force; an electrical switch needs no activation force because it has no physical actuator.

Type (Colorado program) Switches it lists
Mechanical Button, joystick, grasp, chin, pillow and wobble switches
Electrical Capacitive, sip-n-puff, optical (infrared) eye-blink, EMG and brainwave switches

Adaptive switch

An adaptive switch is a switch built so that a person who cannot use a standard touchscreen, mouse or keyboard can still send a signal. The table above is the sourced range of designs, from a large button to a brainwave sensor.

Sip and puff

Sip-n-puff appears in the Colorado list as an electrical switch, meaning one with no physical actuator to press. As the name suggests, it is operated by breath. Sip-and-puff controls also appear on powered wheelchairs for users with very limited hand function, as covered in the CASRAI guide to what a wheelchair is and the types available.

Where it matters for labs, clinics and supply decisions

A switch setup has four layers. A short checklist for anyone handling an order or an equipment record:

Layer What to identify Source
Switch (input) Which type, mechanical or electrical, and which body action operates it Colorado program
Connection How the switch reaches the device, for example USB or Bluetooth sending a keystroke signal on Android Google Android help
Scanning setup Scanning technique and pattern used by the software Colorado program
Assessment and training Who selected and placed the switch, and what support the user has for learning it Colorado program

On the last layer, the Colorado program says selecting and placing a switch typically involves an experienced physical or occupational therapist or a well-trained assistive technology specialist. It lists target size, activation force, volitional movement, stamina, range of motion and mounting location as factors to take into account, and notes that learning to use a switch “may require training and adequate support”, particularly with scanning software.

Related reading: nurse call lights and call buttons cover the alert side of patient-room equipment, and Medicare DME coverage explains how durable medical equipment is treated for reimbursement.

Common misunderstandings

  • “A switch is the whole system.” The switch only sends a press. What the press does depends on the connection and the scanning software.
  • “Any switch works with any device.” Google’s page describes switches that send a keystroke signal over USB or Bluetooth to an Android device; compatibility with a given device is a property of that pairing, not of switches in general.
  • “It is only for computers.” The Colorado program lists home controls, wheelchairs, communication devices and recreational equipment as well.
  • “Set-up is a one-off purchase decision.” Selection and placement involve a therapist or specialist, and learning may need ongoing support.

FAQ

What is an adaptive switch?

A switch designed for people with significantly limited movement, used to operate computers, home controls, wheelchairs, communication devices and other equipment. Designs range from mechanical button and joystick switches to electrical capacitive, sip-n-puff, eye-blink, EMG and brainwave switches.

What is sip and puff?

A breath-operated switch type, listed by the Colorado Assistive Technology Act Program among electrical switches. Sip-and-puff switches are also listed as a control option on powered wheelchairs in the CASRAI wheelchair guide.

Does Android have switch access?

Yes. Google’s Android Accessibility Help describes Switch Access, which scans items on the screen and lets the user select one with a switch, an external keyboard key or a device button.

Who chooses a switch?

According to the Colorado program, typically an experienced physical or occupational therapist or a well-trained assistive technology specialist.

Sources

  • Colorado Assistive Technology Act Program, University of Colorado Denver, “Ability Switches”: ucdenver.edu. Checked 30 October 2026.
  • Android Accessibility Help, “Switch Access for Android”: support.google.com. Checked 30 October 2026.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Switch Access: Adaptive Switches, Scanning and Sip and Puff

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →