Written and maintained by CASRAI Editorial Board
Published
On this page
US Topo is the U.S. Geological Survey’s current series of digital topographic maps. Each map is modeled on the familiar 7.5-minute, 1:24,000-scale quadrangle, is generated from national GIS databases rather than drawn by hand, and is distributed free as a layered, georeferenced PDF. The series began in 2009 and now covers the whole United States, with Alaska completed in 2021.
What is US Topo?
US Topo is the name of the USGS National Geospatial Program’s modern quadrangle map product. The USGS describes it as the current generation of its topographic maps: the maps keep the layout researchers know from the older 7.5-minute quadrangles, but each one is assembled from national geospatial databases and published as a digital file. The term is used for quadrangles published in 2009 or later, which separates it from the legacy paper series.
The USGS program page states that US Topo matches the 7.5-minute, 1:24,000-scale quadrangles that the agency released between 1947 and 2006. The scale differs in Alaska and Puerto Rico. A 2009 USGS fact sheet and a Department of the Interior release that announced the product in December 2009 both describe the same starting point: a familiar quadrangle format rebuilt from The National Map data.
How US Topo differs from the Historical Topographic Map Collection
US Topo is one of two USGS digital map collections. The other is the Historical Topographic Map Collection (HTMC), which holds scans of the earlier printed maps from 1882 through 2006. A University of Illinois at Chicago research guide describes the two as separate collections that are both served as georeferenced PDFs. In short: HTMC is for how a place looked in the past, and US Topo is for how the national databases describe it now.
| Question | Legacy printed quadrangles (1947-2006) | US Topo (2009 onward) |
|---|---|---|
| Where do you find it? | As scans in the Historical Topographic Map Collection, which covers 1882 through 2006 | The National Map Downloader and the USGS Store map locator, using the US Topo Availability overlay |
| How is the map made? | Published as printed quadrangle maps | Generated from national GIS databases |
| What does the file let you do? | Georeferenced PDF scans, per the UIC guide | Layered, georeferenced PDF: toggle layers, read coordinates, measure distance and area |
| Which years does it represent? | The year printed on each sheet | The publish date of each cycle edition |
US Topo specifications: scale, datum, projection and format
The USGS program page gives the core technical specification. The maps follow the 7.5-minute quadrangle layout at 1:24,000 scale, except in Alaska and Puerto Rico where the scale varies. They are georeferenced to the North American Datum of 1983 (NAD 83) or the World Geodetic System of 1984 (WGS 84) and projected to Universal Transverse Mercator (UTM). The map collar carries latitude and longitude as well as the U.S. National Grid.
| Property | Value |
|---|---|
| Quadrangle format | 7.5-minute |
| Nominal scale | 1:24,000 (varies in Alaska and Puerto Rico) |
| Horizontal datum | NAD 83 or WGS 84 |
| Projection | UTM |
| Collar references | Latitude/longitude and the U.S. National Grid |
| File type | Layered PDF with geospatial extensions (GeoPDF) |
| Production cycle | Historically three years for the 48 conterminous states, Hawaii and Puerto Rico |
| Cost | Free to download |
File size
The 2009 fact sheet put each digital quadrangle at roughly 15 to 20 megabytes. The UIC research guide gives a median US Topo file size of 22 MB, so plan storage and bandwidth accordingly when you assemble many quadrangles for a study area.
What layers does a US Topo map contain?
A US Topo file is a stack of layers you can switch on and off. The current USGS program page lists elevation, hydrography, geographic names, transportation, boundaries, structures and land cover, plus high-resolution color imagery. Where 3D Elevation Program (3DEP) data are available, the map also carries shaded relief. The 2009 prototype was narrower: the Department of the Interior release lists orthoimagery, roads, geographic names, contours and hydrography, all drawn from The National Map. The data table below compares the two layer lists.
Two of these layers connect directly to other topics on this site. The geographic names layer comes from the national names database, the subject of the guide to geographical names. The elevation and shaded-relief content rests on the same kind of surfaces covered in digital elevation models, and the high-resolution terrain data behind them is introduced in lidar point clouds.
How to download US Topo maps
US Topo maps are free. The USGS program page points to The National Map Downloader and to topoBuilder, which produces custom maps. The UIC research guide describes the Store Map Locator and Downloader, which serves free maps from 1882 to the present, and gives a specific route for US Topo: open the Overlays tab, select US Topo Availability, and click a map pin. The download link is sent to an email address you provide. Printed copies can also be ordered from the USGS.
Check which edition you have
Because US Topo has been refreshed on a roughly three-year cycle, two quadrangles for the same place can differ by edition. The USGS advises checking publish dates with the US Topo Availability service. Record the date for every sheet you use.
Using US Topo in research
US Topo is a base map and a source of reference features, not a measurement dataset in itself. Researchers in geography, ecology, hydrology, archaeology and planning use quadrangles to locate field sites, to show context in figures, and to read coordinates. The georeferencing built into the PDF means coordinates and distances can be read directly in a PDF viewer that supports geospatial PDFs, and markup can be saved with its coordinates.
What to record when you cite a map
- The quadrangle name and its publish date (the edition), as shown by US Topo Availability.
- The datum (NAD 83 or WGS 84) and the UTM zone, so that coordinates you report can be reproduced.
- The layers you switched on when you made a figure, because the PDF lets readers toggle them.
- The access date and the USGS page you downloaded from.
Common mistakes
- Mixing US Topo with historical scans without saying so. The two collections represent different years and are produced differently. State which one each figure uses.
- Assuming one datum. The USGS specification allows NAD 83 or WGS 84. Confirm the datum of the file before combining it with other layers.
- Ignoring the edition. A map is only as current as its cycle. Use the publish date, not the download date, to describe how current the data are.
- Treating Alaska and Puerto Rico like the other states. The scale differs there, so measurements from the standard 1:24,000 assumption do not carry over.
- Overstating precision. Features on a 1:24,000 map are generalized. Do not quote positions from the printed or on-screen map as survey-grade values.
How the US Topo series developed
The Department of the Interior release says a Digital Map-Beta prototype of the new maps had been available since June 2009 and announced the series on 3 December 2009. The release describes the product as a GeoPDF in the 7.5-minute layout, built from orthoimagery, roads, geographic names, contours and hydrography in The National Map, and offered free through the USGS Store. Alaska, the last region to be completed, was finished in 2021, according to the USGS program page. That gives US Topo a documented span of more than a decade between the first prototype and national coverage.
Working with the layered PDF
The 2009 USGS fact sheet explains what the layered file allows: you can toggle data layers, zoom, and print full-size maps or custom sections, and paper copies are sold through the USGS Store. The current USGS pages add that the geospatial extensions support reading coordinates, measuring distance and area, and keeping markup that is georeferenced. For a study, this means one downloaded file can serve both as a printed field map and as an on-screen reference, with the same coordinate system in both uses.
When you bring a quadrangle into other software, keep the source PDF unchanged and record any exported version separately. Reporting the layers you exported (for example, imagery on or off) lets a reader reproduce the figure from the same downloaded edition.
Where does US Topo coverage extend?
The USGS reports coverage for the conterminous states, Hawaii, Puerto Rico, the U.S. Virgin Islands and Alaska, the last completed in 2021. The three-year production cycle has been applied to the 48 conterminous states, Hawaii and Puerto Rico.
Sources
- U.S. Geological Survey: US Topo Maps for America, checked 2026-11-17
- U.S. Geological Survey: US Topo, the current generation of USGS topographic maps, checked 2026-11-17
- U.S. Department of the Interior: A New Generation of USGS Maps (3 December 2009), checked 2026-11-17
- U.S. Geological Survey Fact Sheet 2009-3108: US Topo, Topographic Maps for the Nation, checked 2026-11-17
- University of Illinois Chicago Library: Maps Produced by the U.S. Government, Topographic Maps, checked 2026-11-17
Data: US Topo layers: 2009 prototype release versus current USGS description
Compares which map layers are named in the December 2009 Department of the Interior announcement of US Topo with the layers listed on the current USGS US Topo program page. Compiled by hand from those two official pages.
Period covered: 2009/2026. Coverage: United States.
| Layer | 2009 announcement | Current USGS page |
|---|---|---|
| Orthoimagery / color imagery | Named (orthoimagery) | Named (high-resolution color imagery) |
| Roads / transportation | Named (roads) | Named (transportation) |
| Geographic names | Named | Named |
| Elevation (contours) | Named (contours) | Named (elevation) |
| Hydrography | Named | Named |
| Boundaries | Not named | Named |
| Structures | Not named | Named |
| Land cover | Not named | Named |
| Shaded relief (3DEP) | Not named | Named, where 3DEP data are available |
Sources
- U.S. Department of the Interior: A New Generation of USGS Maps (accessed 2026-11-17)
- U.S. Geological Survey: US Topo Maps for America (accessed 2026-11-17)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







