Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Who uses it: labor and delivery clinicians use fetal scalp electrodes; biomedical engineers, clinic staff and buyers meet them in catalogues and regulatory records. This page describes products and general use; it is not medical advice.
A fetal scalp electrode (FSE) is a single-patient sensor that attaches directly to the fetal scalp during labor to pick up the fetal heart’s electrical signal for a monitor. In US regulation it is a Class II device, and the generic type includes both disposable spiral electrodes and reusable circular electrodes.
What a fetal scalp electrode is
Under 21 CFR 884.2675, a fetal scalp circular (spiral) electrode and applicator is “a device used to obtain a fetal electrocardiogram during labor and delivery.” It makes electrical contact between fetal skin and an external monitoring device by a shallow subcutaneous puncture of fetal scalp tissue with a curved needle or needles (eCFR, checked 2026-11-01).
Because it contacts the fetus directly, it is an internal monitoring method. External methods, such as the belt-mounted transducer described in the tocodynamometer guide, do not penetrate tissue. Handheld listening devices are a different category again; see the fetoscope guide.
How it is built
A published case report describes the sensor as containing a spiral wire tip that attaches it to the fetal scalp (BMC Pregnancy and Childbirth, 2022, checked 2026-11-01). The regulation pairs the electrode with an applicator, so listings name both. The electrode connects to a monitor through a lead; the monitor converts the signal into a heart rate tracing.
Types and variants
| Type | Reuse | Source |
|---|---|---|
| Spiral electrode | Nonreusable | 21 CFR 884.2675(a) |
| Circular electrode | Reusable | 21 CFR 884.2675(a) |
Both variants are in the same regulation and the same FDA product code. The regulation does not rank them or say which setting suits which.
Regulatory identity: what to look for in records
| Item | Value | Source |
|---|---|---|
| Regulation number | 21 CFR 884.2675 | eCFR |
| FDA classification | Class II (performance standards) | eCFR; openFDA classification record |
| FDA product code | HGP, “Electrode, Circular (Spiral), Scalp And Applicator” | openFDA classification database |
| Review specialty | Obstetrics/Gynecology | openFDA classification database |
| GMDN term | 35038, “Foetal scalp electrode, spiral” (as recorded in one device listing) | FDA AccessGUDID |
What one device listing states
The FDA AccessGUDID record for the Goldtrace One fetal spiral electrode (Clinical Innovations) is one example of how a listing reads: it is packaged sterile, labeled single-use, labeled as not made with natural rubber latex, and carries no MRI safety information in its labeling (accessed 2026-11-01). Other products’ listings differ, so read the specific record or the instructions for use for the product in question. This is an example of a record, not a recommendation.
Safe use and handling basics
- It is a clinician-applied device. Use follows the manufacturer’s instructions for use and the facility’s protocols; this page gives no application steps and no guidance on whether it suits a given patient.
- The case report notes that most frequently reported complications of use include cellulitis, abscess, sepsis, fetal cephalohematoma and meningitis, and maternal endometritis and chorioamnionitis.
- Check that a product’s labeling states sterile or nonsterile and single-use or reusable, and follow the instructions for use for handling and disposal.
Common mistakes
- Confusing it with an external transducer. The tocodynamometer and external Doppler sit on the abdomen; the FSE contacts the fetus. See the ultrasound probe types guide for the external imaging side.
- Treating spiral and circular as interchangeable in a record. The regulation distinguishes nonreusable spiral from reusable circular electrodes.
- Assuming the applicator is separate. The regulated device type is the electrode and applicator together.
FAQ
What is a fetal scalp electrode used for?
To obtain a fetal electrocardiogram during labor and delivery, per 21 CFR 884.2675.
Is a fetal scalp electrode a Class II device?
Yes. 21 CFR 884.2675 classifies the fetal scalp circular (spiral) electrode and applicator as Class II (performance standards).
Is a fetal scalp electrode single-use?
The spiral type is described as nonreusable in the regulation, and the example AccessGUDID listing is labeled single-use. The regulation also covers reusable circular electrodes.
Sources
- 21 CFR 884.2675, Fetal scalp circular (spiral) electrode and applicator, eCFR: ecfr.gov (checked 2026-11-01).
- openFDA device classification, product code HGP: api.fda.gov (checked 2026-11-01).
- FDA AccessGUDID, Goldtrace One Fetal Spiral Electrode: accessgudid.nlm.nih.gov (checked 2026-11-01).
- Case report on a fetal scalp electrode, BMC Pregnancy and Childbirth, 2022: PMC9701356 (checked 2026-11-01).







