Written and maintained by CASRAI Editorial Board
Published
This page describes products and general use; it is not medical advice.
On this page
A retractable syringe is a piston syringe with a built-in safety feature that retracts the needle after use so it is less likely to cause an accidental needlestick. It is used by clinic and hospital staff, nurses, pharmacists and others who handle injection equipment, and it is a common option for facilities that need to meet needlestick-prevention rules. After reading this page you should know how the FDA classifies these devices, which variants appear in FDA clearance records, and which OSHA requirement they relate to.
What is a retractable syringe?
A retractable syringe is a safety syringe in which the needle is drawn back into the device after the injection. Regulators do not treat it as a separate device class. The FDA regulates it as a piston syringe under 21 CFR 880.5860, which defines a piston syringe as “a device intended for medical purposes that consists of a calibrated hollow barrel and a movable plunger”, with a male connector (nozzle) at one end of the barrel for fitting the hub of a hypodermic needle. The device is “used to inject fluids into, or withdraw fluids from, the body.” Piston syringes are Class II (performance standards).
In the FDA product code database, retractable and other needle-protected syringes sit under product code MEG, named “Syringe, Antistick”. Product code MEG is Class 2, regulation number 880.5860, in the General Hospital review panel, and is not exempt from good manufacturing practice requirements (openFDA device classification, read 2026-11-08).
How it is built
Every retractable syringe keeps the basic parts defined in the regulation: a calibrated barrel, a movable plunger and a nozzle that accepts a needle. What makes it a retractable syringe is the added safety mechanism. OSHA describes this class of product as a “sharps with engineered sharps injury protections”: a needle device used for withdrawing body fluids, accessing a vein or artery, or administering medications or other fluids, with “a built-in safety feature or mechanism that effectively reduces the risk of an exposure incident” (29 CFR 1910.1030(b)). How the retraction is triggered differs between brands and is described in each manufacturer’s instructions for use, which should be read before a product is introduced into a workplace.
For the plain (non-safety) parts of a syringe and needle, see what is a syringe and disposable syringe needles.
Types and variants
The FDA 510(k) premarket notification database lists many clearances under product code MEG whose device names contain “retractable”. The table below shows a sample of them, drawn only from the device names and decision dates in the database (openFDA 510(k) API, read 2026-11-08). The names show which configurations have been cleared; they are not a ranking of products.
| Variant named in clearance | 510(k) number | Applicant | Decision date |
|---|---|---|---|
| Safety syringe with fixed needle (0.5 ml) | K162030 | Sol-Millennium Medical, Inc. | 2016-08-19 |
| Automatically retractable safety syringes with fixed needle | K141640 | Shantou Wealy Medical Instrument Co., Ltd | 2014-11-19 |
| Automatically retractable safety syringes (with detachable needle) | K222452 | Shantou Wealy Medical Instrument Co., Ltd | 2022-11-23 |
| Automatically retractable safety syringe | K213077 | Zhejiang Lingyang Medical Apparatus Co., Ltd. | 2022-04-27 |
| Automatically retractable insulin safety syringe | K210216 | Shantou Wealy Medical Instrument Co., Ltd | 2022-03-04 |
| Retractable safety syringe, insulin, tuberculin and allergy versions | K191490 | Jiangsu Caina Medical Co., Ltd | 2019-10-03 |
From these names, the configurations that appear are fixed-needle and detachable-needle syringes, and general-purpose, insulin, tuberculin and allergy versions. Older clearances in the same product code date back to 2001, so retractable designs have been through FDA review for more than two decades.
How to choose
The only selection criteria stated by the sources read for this page come from OSHA’s Bloodborne Pathogens Standard (29 CFR 1910.1030). It requires engineering and work practice controls to eliminate or minimize employee exposure, and it lists “self-sheathing needles” and “safer medical devices, such as sharps with engineered sharps injury protections and needleless systems” among engineering controls. Engineering controls must be examined and maintained or replaced on a regular schedule. A retractable syringe is one way to put an engineered sharps injury protection in place; the standard does not require this specific design.
For the facility-side program that surrounds device choice, see the guide on bloodborne pathogens exposure control plans in hospitals.
Safe use and handling basics
- Follow the manufacturer’s instructions for use for the specific product; mechanisms differ between brands.
- Treat a used syringe as a contaminated sharp. OSHA lists sharps disposal containers among engineering controls, and a retractable needle does not remove the need for one. See FDA-cleared sharps containers and when sharps containers should be replaced.
- Review the engineering controls in use on a regular schedule, as 29 CFR 1910.1030(d)(2) requires.
Common mistakes
- Assuming a retractable syringe is a different regulatory category. It is a piston syringe under 21 CFR 880.5860.
- Assuming the safety feature replaces a sharps container. The standard treats them as separate engineering controls.
- Assuming all retractable syringes work the same way. The clearance names show fixed-needle, detachable-needle and insulin-type configurations, each with its own instructions.
Frequently asked questions
What is a retractable syringe?
It is a piston syringe with a built-in mechanism that retracts the needle after use to reduce the risk of a needlestick. The FDA regulates it as a Class II piston syringe under 21 CFR 880.5860, product code MEG.
Is a retractable syringe the same as a safety syringe?
A retractable syringe is one kind of safety syringe. OSHA’s term is “sharps with engineered sharps injury protections”, which covers any needle device with a built-in safety feature that effectively reduces the risk of an exposure incident.
Does OSHA require retractable syringes?
No. OSHA requires engineering and work practice controls to eliminate or minimize exposure, and names safer medical devices as one example. It does not name a specific design.
Where to find these supplies
Facilities that stock injection equipment can browse infusion supplies.
Sources
- 21 CFR 880.5860, Piston syringe: law.cornell.edu/cfr/text/21/880.5860 (read 2026-11-08).
- openFDA device classification, product code MEG: api.fda.gov/device/classification.json (read 2026-11-08).
- openFDA 510(k) database, product code MEG, device name “retractable”: api.fda.gov/device/510k.json (read 2026-11-08).
- OSHA Bloodborne Pathogens Standard, 29 CFR 1910.1030: law.cornell.edu/cfr/text/29/1910.1030 (read 2026-11-08).







