Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
A temperature strip is a disposable plastic strip whose heat-sensitive chemicals change color to indicate body temperature. In U.S. regulation there are two separate device types behind the name: a clinical color change thermometer for oral, rectal or axillary use (Class I), and a liquid crystal forehead temperature strip (Class II). Which one a product is decides which rule applies to it.
Who uses it: clinic and ward staff, caregivers and buyers who need a low-tech, single-use way to indicate temperature or the presence or absence of fever; students learning device categories.
What is a temperature strip?
The FDA does not use the phrase “temperature strip” for one product. It describes two regulated devices that match the term:
- Clinical color change thermometer. 21 CFR 880.2900 defines it as “a disposable device used to measure a patient’s oral, rectal, or axillary (armpit) body temperature.” It records temperature with heat sensitive chemicals sealed at the end of a plastic or metal strip, and body heat causes a stable color change.
- Liquid crystal forehead temperature strip. 21 CFR 880.2200 defines it as a device applied to the forehead that indicates “the presence or absence of fever, or to monitor body temperature changes.” It displays color changes of heat sensitive liquid crystals that correspond to variation in the surface temperature of the skin; the liquid crystals are cholesteric esters sealed in plastic.
Searches for a “forehead thermometer strip” or “fever strip” usually mean the second type. Note the wording: the forehead strip is defined by skin-surface temperature, while the color change thermometer is defined by oral, rectal or axillary sites.
How a temperature strip is built
Both regulations describe the same basic construction: heat-sensitive chemicals sealed into a plastic (or, for the color change thermometer, plastic or metal) strip. The color change itself is the reading. Per 21 CFR 880.2900 the color change in the oral, rectal or axillary type is stable.
Types and how the FDA classifies them
| Type | FDA product code | Regulation | Class | Site named in the regulation |
|---|---|---|---|---|
| Thermometer, clinical color change | FQZ | 21 CFR 880.2900 | Class I (general controls) | Oral, rectal or axillary |
| Strip, temperature, forehead, liquid crystal | KPD | 21 CFR 880.2200 | Class II (special controls) | Forehead (skin surface) |
Both regulations state the device is exempt from the premarket notification (510(k)) procedures of 21 CFR part 807, subpart E, subject to the limits in 21 CFR 880.9. Exempt does not mean unregulated: the FDA classification record for code FQZ lists the device as not exempt from good manufacturing practice requirements, and makers of exempt class I devices must still register their establishment with the FDA.
Standards
The FDA classification record for code FQZ lists ASTM E825-98 (reapproved 2023) as a recognized standard for the clinical color change thermometer. This page does not reproduce the standard; consult the standard itself for its requirements.
Safe use and handling basics
- Follow the manufacturer’s instructions for use for the specific product: the regulations above define the device classes but do not give a placement or reading procedure.
- Use the site the product is labeled for. The color change thermometer regulation names oral, rectal and axillary use; the liquid crystal strip regulation names the forehead.
- The regulation describes the color change thermometer as disposable, so treat that type as single-use unless the manufacturer states otherwise.
Common mistakes
- Treating the two device types as one. They sit in different FDA classes and are defined for different body sites.
- Assuming an electronic thermometer works the same way. A strip shows color; digital and infrared devices are different products. See thermometer accuracy and how an infrared thermometer is used.
- Confusing a thermometer strip with a test strip. A temperature strip reads heat; chemical test strips (for example for urine or glucose) are different devices.
For the wider device family see what a medical thermometer is. Glass mercury thermometers are covered in mercury thermometer disposal.
FAQ
Is a fever strip a medical device?
Yes. The FDA regulates the liquid crystal forehead temperature strip as a Class II device under 21 CFR 880.2200 (product code KPD), and the clinical color change thermometer as a Class I device under 21 CFR 880.2900 (product code FQZ). Records checked 2026-10-30.
Are temperature strips reusable?
The clinical color change thermometer is defined in 21 CFR 880.2900 as a disposable device. The forehead strip regulation does not say; follow the product’s own instructions.
What is the difference between a forehead thermometer strip and a color change thermometer?
Both use heat-sensitive chemicals in a plastic strip. The forehead strip uses liquid crystals applied to the forehead and shows skin-surface temperature; the color change thermometer is defined for oral, rectal or axillary use. Their FDA classes differ (II versus I).
Sources
- 21 CFR 880.2900, Clinical color change thermometer: https://www.law.cornell.edu/cfr/text/21/880.2900 (Cornell LII copy of the eCFR text, checked 2026-10-30).
- 21 CFR 880.2200, Liquid crystal forehead temperature strip: https://www.law.cornell.edu/cfr/text/21/880.2200 (checked 2026-10-30).
- FDA openFDA device classification records for product codes FQZ and KPD: FQZ and KPD, last updated 2026-10-19 (checked 2026-10-30).
- FDA Product Classification database entry for FQZ, which lists the recognized ASTM E825 standard: https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpcd/classification.cfm?id=FQZ (checked 2026-10-30).







