Written and maintained by CASRAI Editorial Board
Published
On this page
An impervious gown is a protective garment described as preventing fluid penetration through its barrier material. The word alone does not establish an AAMI protection level, whole-body coverage or sterility: HALYARD, for example, lists an Impervious Comfort Gown as open-backed and AAMI “Not Rated.” The useful specification is the product’s documented material, tested performance, coverage and intended use.
This page describes products and general use; it is not medical advice.
What an impervious gown is
“Impervious” describes a claimed barrier property. It does not identify a single regulated gown category or a particular construction. NIOSH explains that manufacturers use terms such as impervious, impermeable and fluid-resistant inconsistently. A claim might concern water, blood, microorganisms or several challenges; those are different questions that require specific supporting tests.
Who uses it: healthcare personnel and staff performing patient-contact, decontamination or cleanup work, where the particular garment is intended for that task. HALYARD identifies these applications for its non-sterile protective gowns. The garment’s purpose is to interrupt contact between potentially contaminated fluids and the wearer’s clothing or skin.
Keep two descriptions separate when reading a listing: what the material is called and what the finished device is intended to do. “Impervious film” tells you something about the material claim. “Surgical gown” describes an intended-use category with additional requirements. A product name containing the first phrase does not supply the documentation for the second.
How an impervious gown is built
Manufacturers use both films and layered fabrics. North American Rescue describes its ZZ-0750 gown as a single layer of chlorinated polyethylene, or CPE. HALYARD’s protective-apparel catalogue identifies spunbond film laminate for its Impervious Comfort Gowns and protective tri-layer fabric with polyethylene coating for its Impervious Open Back Gown. These examples show why “impervious” cannot be translated into one universal material recipe.
The closures and cuffs also vary. The North American Rescue example is a pullover with waist ties and thumbhooks. HALYARD’s catalogue distinguishes knit-cuff and thumbhook Comfort models. Its current Comfort product page separately identifies over-the-head donning, knit cuffs and an open back. These features describe how the garment is assembled and worn; they do not independently establish its liquid-barrier classification.
Seams are part of the barrier, too. NIOSH’s testing guidance recommends asking about seam results as well as fabric results. A report on a flat material specimen does not, by itself, answer whether a finished garment’s seams and required protective zones perform to the same claim.
The downloadable data table below compiles labelled material, cuff and coverage features for three actual examples. It records manufacturer descriptions without assigning protection levels that the cited records do not establish.
Types and variants: intended use comes first
Products described as impervious can have quite different designs. The table separates representative use categories rather than ranking products. Its sources describe different intended uses, so the rows are not interchangeable substitutes.
| Type or variant | Typical use described by the source | Key difference | Source |
|---|---|---|---|
| Open-back protective gown | Decontamination and emergency-room applications for the HALYARD Comfort range | Open back; the current Comfort listing states AAMI Not Rated | HALYARD protective-apparel catalogue and Comfort product specifications |
| Non-surgical isolation gown | Low or minimal risk patient isolation | FDA describes this category as Class I and exempt from premarket review | FDA, Medical Gowns |
| Surgical gown | Protection of personnel and patients during surgical procedures | FDA describes Class II devices requiring 510(k) notification and sterile supply | FDA, Medical Gowns |
For the broader garment category, see what a surgical gown is. The distinction here is narrower: an impervious-material description cannot replace a gown’s intended-use classification. Likewise, a surgical gown may have different protective requirements across its front, sleeves and back. “Surgical” does not mean every part of the garment provides identical protection.
Sizes or specifications that matter
Read dimensions as product-specific measurements. North American Rescue publishes the following figures for ZZ-0750, a non-sterile, single-use gown described as one size fits most. These are dimensions of that product, not a sizing standard for all impervious gowns.
| Product measurement | Published length | Published width | Source |
|---|---|---|---|
| Gown, measured at shoulders | 45 inches | 29 inches | North American Rescue ZZ-0750 specifications |
| Arms | 23 inches | 12 inches | North American Rescue ZZ-0750 specifications |
A label such as universal, Large or XXL is a manufacturer’s size designation. In HALYARD’s catalogue, 69600 is labelled Universal; its current Comfort product page displays Large. Keep the document and product reference attached to the measurement or label instead of silently treating those descriptions as equivalent. The gown size chart guide explains why comparisons need the exact manufacturer’s measurements.
Fit also has a protective purpose. CDC’s PPE poster describes gown coverage from neck to knees, sleeves to wrists and coverage around the back. A long front panel alone does not demonstrate that coverage. OSHA requires appropriate PPE sizes to be readily accessible, rather than leaving staff to work with whichever garment happens to be available.
NIOSH identifies consequences in both directions: a garment that is too small may tear during reaching, bending or kneeling, while an oversized garment may snag. It also says wearers need to determine their size again when a facility switches product models or suppliers. Keeping the old size name without checking the replacement garment is therefore an incomplete fit assessment.
What barrier tests establish
ASTM F1670 and ASTM F1671 answer different questions. NIOSH describes F1670 as a synthetic-blood penetration screening test. F1671 uses a bacteriophage challenge to evaluate viral penetration resistance. A water-resistance result cannot be used as a substitute for the viral test.
In its explanation of PB70:2012, NIOSH identifies ASTM F1671 for Level 4 surgical and isolation gowns, while the Level 4 synthetic-blood entry applies to surgical drapes. This matters when a listing puts several test names next to one broad claim. A named method needs to be tied to the relevant product, specimen and classification; the presence of “ASTM” alone does not resolve those details.
NIOSH also explains that open-backed isolation gowns cannot be rated under the critical-area requirements it describes. That helps interpret the HALYARD example: its manufacturer’s listing can describe an impervious product while separately stating AAMI Not Rated. Those fields address different aspects of the garment.
For the wider classification framework, see AAMI PB70 gown levels and selection. For a specific product, retain the manufacturer’s actual rating and documentation rather than assigning a level from the adjective “impervious.”
FDA’s coverage diagrams provide another distinction. A surgical gown’s back may be nonprotective. For surgical isolation gowns, all areas except cuffs, hems and bindings are critical zones, and seams must provide the same liquid-barrier protection as the rest of the gown. A claim about a high-performing front panel does not establish the broader coverage required of an isolation garment.
How to choose: read the documented claims together
Selection starts with the anticipated exposure and the garment’s intended use. OSHA’s bloodborne-pathogens rule links the choice of protective body clothing to the task and degree of exposure. FDA advises looking for labelling that states the intended use and desired level of protection. These are documented selection criteria, rather than a department-wide recommendation for one product.
OSHA also defines appropriate PPE in terms of normal use and the duration for which it is used: blood or other potentially infectious materials must not reach the employee’s clothing, skin or mucous membranes. That connects the protective specification to actual working conditions. The employer’s assessment must address the task, rather than treating a fabric’s name as evidence of suitability for every exposure.
- Intended use and sterile status. Compare the required task with the device category on the label. FDA requires surgical gowns to be supplied sterile; a non-sterile protective gown does not become a surgical product because its material is described as impervious.
- Material and garment evidence. Review the fabric results, seam results and protected areas together, as NIOSH recommends. Identify the applicable classification rather than inferring it from one material test.
- Coverage and fit. Assess the actual back design, sleeves and size range. CDC’s coverage description provides a useful reference for what the garment must cover in use.
- Compatibility with other PPE. NIOSH identifies the interfaces between garments, gloves and other protective equipment as selection considerations. CDC’s poster specifically shows gloves extending over the isolation-gown wrist.
A worked example: reading “Impervious Comfort Gown”
Consider the HALYARD Comfort product record. It lists open-back coverage, single use, AAMI Not Rated and no clearance for chemotherapy drugs. The interpretation is limited and practical: its name establishes neither an AAMI level nor a chemotherapy clearance. A specification requiring either would need a product whose documentation explicitly establishes that requirement. This example interprets the published fields; it does not recommend the gown for a particular clinical task.
Safe use and handling basics
Treat an impervious gown as one component of a PPE ensemble. CDC’s poster identifies the gown front and sleeves as contaminated during removal, and calls for hand hygiene after PPE removal. It also stresses limiting contact with surfaces and keeping hands away from the face. Follow the product-specific removal design and institutional training; an open-back pullover and a tied gown need not handle identically.
OSHA requires a garment penetrated by blood or other potentially infectious materials to be removed immediately or as soon as feasible. Its rule also requires PPE removal before leaving the work area and placement in a designated location or container. A favourable material description does not cancel those handling requirements.
Both the North American Rescue gown and the current HALYARD Comfort listing identify single use. Do not treat those examples as reusable garments. FDA also directs users to check the manufacturer-designated shelf life; a protective product’s name does not establish that an expired gown still provides its intended barrier performance.
The PPE donning and doffing guide provides broader training context. The product instructions and facility procedures remain necessary for the actual garment and setting.
Common mistakes when reading an impervious-gown label
- Turning a description into a rating. HALYARD’s Not Rated field is a concrete reason to keep the product name and classification separate.
- Confusing fabric evidence with coverage. A material result does not describe an uncovered back or establish every seam’s performance. Match the report to the part of the garment it tests.
- Assuming sterile or chemotherapy-compatible. These are separate claims. The Comfort listing explicitly says no chemotherapy clearance, while North American Rescue labels its example non-sterile.
- Comparing size names without their source. Universal and Large are not interchangeable measurements. Keep the model, document and dimensional definitions together.
- Using a water test to infer viral resistance. NIOSH expressly separates these challenges. Ask which test and which specimen support the specific protection claim.
Sources
- CDC/NIOSH, Selecting Protective Clothing. Checked 2026-11-14.
- CDC/NIOSH, Standards and Specifications, including its PB70:2012 explanation. Checked 2026-11-14.
- FDA, Medical Gowns. Checked 2026-11-14.
- OSHA, 29 CFR 1910.1030, Bloodborne Pathogens, especially (d)(3). Checked 2026-11-14.
- CDC, Sequence for Putting On and Removing Personal Protective Equipment. Checked 2026-11-14.
- North American Rescue, Impervious Isolation Gowns, ZZ-0750, product specifications. Checked 2026-11-14.
- HALYARD, Impervious Comfort Gown, product specifications. Checked 2026-11-14.
- HALYARD, Protective Apparel catalogue, printed pages 6–7. Checked 2026-11-14.
Data: Impervious gown examples: documented materials and design features
CASRAI compilation of three product examples from HALYARD’s protective-apparel catalogue and North American Rescue’s ZZ-0750 specifications. Size labels remain as published in each cited document; the table does not assign AAMI levels or compare protective effectiveness.
| Product and document | Material | Back or closure design | Cuff feature | Published size label | Row source URL |
|---|---|---|---|---|---|
| HALYARD 69600 — protective-apparel catalogue | Spunbond film laminate | Open back | Knit cuffs | Universal | https://www.halyardhealth.com/wp-content/uploads/c14173_protective-_apparel_catalog.pdf |
| HALYARD 69602 — protective-apparel catalogue | Spunbond film laminate | Open back | Thumbhooks | Universal | https://www.halyardhealth.com/wp-content/uploads/c14173_protective-_apparel_catalog.pdf |
| North American Rescue ZZ-0750 — product specifications | Single-layer chlorinated polyethylene (CPE) | Pullover with waist ties | Thumbhooks | One size fits most | https://www.narescue.com/impervious-isolation-gowns-pack-of-10.html |
Sources
- HALYARD Protective Apparel catalogue, printed pages 6–7 (accessed 2026-11-14)
- North American Rescue, Impervious Isolation Gowns ZZ-0750 (accessed 2026-11-14)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







