Written and maintained by CASRAI Editorial Board
Published
On this page
Short answer
XhoI (often written informally as Xho 1) is a Type II restriction endonuclease originally isolated from Xanthomonas holcicola that recognizes the palindromic hexanucleotide sequence 5′-C↓TCGAG-3′ and cleaves between cytosine and thymine to leave a 4-base 5′ overhang (5′-TCGA-3′). Operating at 37°C with 100% activity in New England Biolabs rCutSmart Buffer, XhoI is heat-inactivated at 65°C for 20 minutes (or 80°C for 5 minutes in fast-digest formulations). Enzymatic cleavage is impaired by overlapping CpG methylation, and its cohesive ends are compatible with SalI.
Definition and scope
XhoI is a foundational Type II restriction endonuclease in molecular biology and biotechnology, widely deployed in recombinant DNA cloning, physical plasmid mapping, and expression vector construction. First isolated and characterized by Gingeras, Myers, Olson, Hanberg, and Roberts in 1978 from Xanthomonas holcicola (ATCC 13461, taxonomically synonymized as Xanthomonas vasicola pv. holcicola), the enzyme has remained a central reagent in modern genetics. While originally harvested directly from bacterial lysates of X. holcicola, commercial preparations are now produced recombinantly by expressing the cloned XhoI gene in Escherichia coli host strains. Recombinant manufacturing guarantees high catalytic purity, removes contaminating host exonucleases, and ensures lot-to-lot consistency across research applications.
The standard Smith and Nathans nomenclature dictates the naming structure of XhoI:
- X: The first letter of the bacterial genus Xanthomonas.
- ho: The first two letters of the specific species holcicola.
- I: The Roman numeral indicating that it was the first endonuclease characterized from this strain.
Searchers, lab supply managers, and bench technicians frequently type the variant “xho 1” or “Xho 1” using an Arabic numeral into electronic inventory databases and purchase orders. In all technical and biochemical contexts, “XhoI” and “Xho 1” denote the identical restriction enzyme; Roman numeral designation remains the canonical format across peer-reviewed literature and manufacturer catalogs.
As a classical Type II restriction enzyme, XhoI acts as a homodimeric endonuclease that requires divalent magnesium ions (Mg²⁺) as an essential catalytic cofactor to cleave phosphodiester bonds on opposing antiparallel DNA strands. It does not require ATP or S-adenosylmethionine (SAM), distinguishing it fundamentally from Type I and Type III systems. For an overview of endonuclease classifications, consult our guide to restriction endonucleases.
XhoI recognizes an unmethylated 6-base pair palindromic sequence. In a random double-stranded DNA molecule with balanced GC content, a specific hexanucleotide motif occurs statistically once every 4,096 base pairs (4⁶ = 4,096 bp). This moderate cleavage frequency makes XhoI ideal for directional cloning, restriction fragment length polymorphism (RFLP) analysis, and linearizing expression vectors without fragmenting target inserts into undersized pieces.
How it works or how it is used in practice
XhoI functions by scanning double-stranded DNA along the major groove until it encounters its cognate palindromic target site: 5′-C↓TCGAG-3′. Upon sequence recognition, conformational rearrangement positions two coordinated Mg²⁺ ions and active-site catalytic residues around the phosphodiester backbone. The enzyme catalyzes nucleophilic attack by activated water molecules on the phosphorus atoms, hydrolyzing the bond between the 5′ cytosine and thymine residues on both strands:
5′-C ↓ T C G A G-3′
3′-G A G C T ↑ C-5′
Hydrolytic cleavage produces staggered 4-nucleotide 5′ single-stranded cohesive extensions with the sequence 5′-TCGA-3′. These sticky ends anneal efficiently with complementary single-stranded overhangs, allowing high-efficiency covalent joining by T4 DNA ligase in downstream recombinant assembly protocols.
Enzymatic kinetics and unit definition
Across major reagent manufacturers—including New England Biolabs (NEB), Thermo Fisher Scientific, and Promega—XhoI enzymatic potency is calibrated against a standardized DNA substrate. One unit (1 U) of XhoI is defined as the amount of enzyme required to completely digest 1 microgram (1 µg) of Lambda DNA (HindIII digest) in 1 hour at 37°C in a total reaction volume of 50 microliters (50 µL).
In routine analytical and preparative bench protocols, investigators generally utilize 5 to 10 units of XhoI per microgram of target DNA. This 5- to 10-fold excess ensures complete digestion within 60 minutes, compensating for minor variations in DNA purity, residual salt from column isolation, or slight pipetting deviations.
Reaction assembly and protocol parameters
A standard 50 µL digestion reaction is set up on ice in a sterile microcentrifuge tube using the following component volumes:
- Target DNA: 1.0 µg of purified plasmid DNA, linear PCR amplicon, or genomic DNA.
- 10× Reaction Buffer: 5.0 µL (e.g., 10× rCutSmart Buffer from NEB or 10× Buffer D from Promega).
- Restriction Enzyme (XhoI): 1.0 µL (typically 10 to 20 units, depending on stock concentration).
- Nuclease-free Sterile Water: Bring total volume to 50.0 µL.
The mixture is mixed gently by pipetting, spun down briefly in a microcentrifuge, and incubated at 37°C for 60 minutes in a calibrated heat block or thermal cycler. For high-throughput screening or accelerated cloning, engineered fast-digest formulations (such as Thermo Scientific FastDigest XhoI) achieve complete cleavage in 5 to 15 minutes using specialized buffer chemistry. For step-by-step guidance on setting up single and double digests, see our comprehensive walkthrough on restriction enzyme digest setup.
Heat inactivation vs. column purification
A major operational strength of conventional XhoI compared to non-heat-inactivatable enzymes (such as BamHI) is that XhoI can be thermally denatured directly in the reaction tube. According to New England Biolabs product specifications, incubating the reaction mixture at 65°C for 20 minutes irreversibly denatures XhoI protein. Promega technical bulletins similarly document that a 15-minute incubation at 65°C yields greater than 95% inactivation.
Thermal inactivation delivers substantial workflow efficiencies: because the endonuclease is rendered catalytically inert, researchers can proceed directly to T4 DNA ligation, blunting, or dephosphorylation in the same tube without performing a silica spin-column cleanup. Eliminating a spin column avoids the standard 15% to 30% DNA yield loss associated with silica membrane adsorption, which is invaluable when working with low-yield PCR amplicons or limited clinical samples.
However, thermal inactivation requirements vary across vendor formulations:
- NEB Recombinant XhoI: Inactivate at 65°C for 20 minutes.
- Promega Conventional XhoI: Inactivate at 65°C for 15 minutes.
- Thermo Scientific Conventional XhoI: Inactivate at 80°C for 20 minutes.
- Thermo Scientific FastDigest XhoI: Inactivate at 80°C for 5 minutes.
Bench researchers must verify the specific inactivation temperature and duration stated on their manufacturer lot sheet rather than applying an assumed 65°C protocol across all brands.
Star activity and fidelity control
Star activity describes relaxed sequence specificity, in which a restriction enzyme cleaves non-cognate sequences differing from its canonical recognition site by one or two nucleotides (such as cleaving 5′-CTCGAA-3′ or 5′-CTCGAC-3′ instead of strictly 5′-CTCGAG-3′). On an analytical agarose gel, star activity produces faint spurious bands or diffuse smearing instead of clean, discrete restriction fragments.
XhoI demonstrates star activity under several well-documented reaction deviations:
- Excess glycerol concentration: Enzyme stock solutions are formulated in 50% (v/v) glycerol. If total enzyme volume exceeds 10% of the reaction volume (e.g., adding more than 5 µL of enzyme into a 50 µL reaction), final glycerol exceeds 5%, which disrupts sequence discrimination. Always restrict enzyme volume to ≤10% (ideally ≤5%) of the total reaction volume.
- Excessive enzyme-to-DNA ratios: Supplying more than 50 to 100 units of enzyme per microgram of DNA drives off-target cleavage.
- Overextended incubation: Incubating for 16 hours or overnight with standard unit concentrations promotes star cleavage. For overnight digests, reduce enzyme concentration to 1 unit per microgram of DNA.
- Elevated pH and low ionic strength: Buffers with pH > 8.0 or insufficient salt concentration relax the steric binding cleft of the enzyme.
- Organic solvent carryover: Residual ethanol, DMSO, or isopropanol carried over from plasmid purification kits readily induces relaxed specificity.
Types or related concepts
Restriction enzyme selection depends on buffer compatibility across multiple enzymes, availability of isoschizomers, and cohesive end compatibility for ligation strategies. The table below compares verified technical specifications across leading commercial enzyme providers.
| Manufacturer & Product | Standard Buffer | Buffer Activity (%) | Incubation Temp | Heat Inactivation | Star Activity Safeguards |
|---|---|---|---|---|---|
| New England Biolabs XhoI Recombinant (#R0146) |
rCutSmart™ Buffer | 100% (r2.1: 100%, r3.1: 100%, r1.1: 25%) | 37°C | 65°C for 20 min | Keep glycerol ≤ 5%; avoid digests > 4 hr with > 10 U/µg |
| Thermo Scientific FastDigest XhoI (#FD0694) |
FastDigest / FastDigest Green | 100% universal buffer | 37°C (5–15 min) | 80°C for 5 min | Engineered for rapid digestion; negligible star risk in 15 min |
| Thermo Scientific Conventional XhoI (#ER0691) |
Buffer R (recommended) | 100% (Buffer O: 50–100%, Red: 20–50%) | 37°C (60 min) | 80°C for 20 min | Maintain ionic strength; keep glycerol volume ≤ 10% |
| Promega Corporation XhoI (#R6161) |
Buffer D / 4-CORE System | 100% (Buffer B: 50–75%, Buffer C: 50–75%) | 37°C (60 min) | 65°C for 15 min | Use supplied Buffer D; avoid prolonged incubation |
| Takara Bio XhoI (#1094A) |
Buffer H (50 mM Tris, 100 mM NaCl, 10 mM MgCl₂) | 100% (Buffer M: 60%, Buffer K: 40%) | 37°C (60 min) | 65°C for 20 min | Maintain ≥ 100 mM NaCl to prevent relaxed specificity |
Isoschizomers and thermostable alternatives
Isoschizomers are restriction endonucleases that recognize the identical DNA sequence. If XhoI is temporarily unavailable or specific physical conditions are needed, researchers can turn to documented isoschizomers:
- PaeR7I: Isolated from Pseudomonas aeruginosa R7, PaeR7I is a true isoschizomer of XhoI. It recognizes
5′-C↓TCGAG-3′and cleaves between cytosine and thymine, leaving the identical 4-base 5′TCGAoverhang. While its general cleavage profile is identical, PaeR7I exhibits subtle differences in cleavage kinetics on specialized synthetic oligonucleotides. - Sfr274I: Isolated from Streptomyces fradiae, Sfr274I is another true isoschizomer that recognizes and cleaves
5′-C↓TCGAG-3′. - TliI: Isolated from the hyperthermophilic marine archaeon Thermococcus litoralis, TliI is a thermostable isoschizomer. While XhoI denatures at 65°C, TliI operates optimally at 70°C to 80°C. This makes TliI exceptional for digesting DNA templates with heavy secondary structure, high GC content, or stable hairpin loops that melt only at elevated temperatures.
- PspXI: Isolated from Pseudomonas species, PspXI is an extended 8-base recognizing endonuclease with the target sequence
5′-VC↓TCGAGB-3′(where V = A, C, or G; and B = C, G, or T). PspXI contains the 6-base XhoI sequence at its core and leaves compatible5′-TCGA-3′overhangs, but cuts much less frequently across complex eukaryotic genomes.
Compatible cohesive ends: The XhoI and SalI ligation strategy
A classic molecular cloning strategy pairs XhoI with another endonuclease that generates identical single-stranded extensions. The primary partner for XhoI is SalI (isolated from Streptomyces albus G), which recognizes 5′-G↓TCGAC-3′.
Comparing the cleavage patterns of both enzymes illustrates their structural compatibility:
XhoI:
5′-C TCGAG-3′
3′-GAGCT C-5′
Overhang: 5′-TCGA-3′
SalI:
5′-G TCGAC-3′
3′-CAGCT G-5′
Overhang: 5′-TCGA-3′
Because both enzymes leave 4-base 5′ TCGA overhangs, an XhoI-digested fragment and a SalI-digested fragment anneal with perfect Watson-Crick base-pairing and can be covalently sealed by T4 DNA ligase. The resulting hybrid junction sequence is:
5′-C T C G A C-3′
3′-G A G C T G-5′
This ligation event creates an asymmetric hybrid sequence (CTCGAC) that permanently destroys both original restriction sites. The hybrid site cannot be cleaved by XhoI (which requires a 3′ G: CTCGAG) and cannot be cleaved by SalI (which requires a 5′ G: GTCGAC). Molecular biologists leverage this non-regenerative junction for two major cloning goals:
- Suppression of non-recombinant background: When a vector is digested with SalI and ligated with an insert carrying an XhoI end, treating the ligation mixture with both SalI and XhoI prior to bacterial transformation cleaves all self-ligated vector plasmids (which restored the SalI site) while sparing all true recombinant plasmids containing the hybrid junction. This reduces empty-vector colony background to near zero.
- Iterative modular assembly: In synthetic biology pathways, genes can be introduced sequentially. Because the junction site is destroyed upon ligation, the downstream cloning site on the vector remains unique for the next assembly step.
Where it matters for labs, clinics or supply decisions
Understanding XhoI kinetics and sequence requirements directly determines the success of PCR subcloning, recombinant protein expression, epigenetic diagnostics, and laboratory procurement. The following four operational areas represent critical technical decision points for molecular biology and clinical laboratories.
1. PCR primer design and terminal flanking bases
The single most prevalent cause of cloning failure involving XhoI occurs during PCR primer design. When bench researchers engineer an XhoI site (5′-CTCGAG-3′) onto the 5′ terminus of a PCR primer, they must include sufficient non-specific flanking nucleotides upstream of the recognition site.
Restriction endonucleases are bulky dimeric macromolecules requiring a double-stranded DNA cylinder extending beyond the target motif to establish initial non-specific electrostatic contacts before cleft engagement. If the recognition sequence sits flush with or too close to the end of a linear PCR amplicon, the enzyme cannot stabilize its dimeric complex.
Controlled kinetic studies by New England Biolabs on cleavage close to DNA ends document the precise flanking base dependency for XhoI:
- 2 flanking base pairs (e.g.,
5′-CC-CTCGAG-3′): Produces only 0% to 10% cleavage after 2 to 20 hours of incubation. PCR amplicons bearing only 2 terminal bases remain virtually intact, resulting in zero recombinant transformants. - 3 flanking base pairs (e.g.,
5′-CCG-CTCGAG-3′): Yields 25% to 75% cleavage across extended incubation periods, resulting in erratic, low-yield cloning. - 5 to 6 flanking base pairs (e.g.,
5′-ATA TAT-CTCGAG-3′): Restores cleavage efficiency to >90% to 100% within standard 1-hour digestions.
Design Protocol: Always append a protective leader of at least 5 to 6 random, non-complementary nucleotides (such as 5′-GAT ATA-CTCGAG...-3′) 5′ of the XhoI site on every PCR primer. Overlooking this requirement wastes weeks of bench troubleshooting.
2. Expression vector engineering and C-terminal polyhistidine tags
In recombinant protein expression systems using the widely adopted pET vector series (such as pET-21a–d and pET-28a–c, originally developed by Novagen/Merck), XhoI occupies a specialized role in the multiple cloning site architecture. For a comprehensive overview of vector design, refer to our guide on multiple cloning sites.
The XhoI recognition sequence (5′-CTCGAG-3′) is situated at the distal 3′ end of the MCS in an exact triplet reading frame that translates into two amino acids: Leucine and Glutamic acid:
CTCencodes Leucine (Leu).GAGencodes Glutamic acid (Glu).
Immediately downstream of this XhoI motif, the vector sequence encodes a C-terminal hexahistidine affinity tag (6xHis: CAC CAT CAC CAT CAC CAT), followed by a translation stop codon (TAA). This design enables direct translational read-through into the 6xHis tag without introducing unstructured or immunogenic peptide linkers.
To successfully produce a C-terminally tagged fusion protein, investigators must observe two essential rules when designing the reverse PCR primer:
- Exclude the native stop codon: The gene’s endogenous termination codon must be deleted from the reverse primer. If retained, the ribosome terminates translation at the end of the gene, shedding the XhoI linker and downstream 6xHis tag.
- Maintain in-frame triplet alignment: The final amino acid codon of the target gene must fuse seamlessly with the first base of the
CTCcodon of the XhoI site. A single-base frameshift produces missense translation and aborts tag synthesis.
Properly cloned constructs produce the expressed fusion protein: [Target Protein] - Leu - Glu - His₆ - Stop. This permits single-step immobilized metal affinity chromatography (IMAC) purification using nickel-nitrilotriacetic acid (Ni-NTA) or cobalt-based resins directly from clarified bacterial lysates.
3. Methylation sensitivity: CpG impairment vs. bacterial plasmid isolation
DNA methylation constitutes an essential epigenetic regulatory layer in eukaryotes and a restriction-modification defense system in prokaryotes. The methylation sensitivity profile of XhoI is defined by three distinct epigenetic marks:
- CpG Methylation (Impaired): The central two bases of the XhoI recognition site comprise a CpG dinucleotide step:
5′-C T [C G] A G-3′. In mammalian tissues, vertebrate cell lines, and plant genomes, DNA methyltransferases (including DNMT1, DNMT3A, and DNMT3B) frequently add a methyl group to cytosine, forming 5-methylcytosine (5mC). New England Biolabs categorizes XhoI as impaired by CpG methylation. When cytosine in this CpG step is methylated, steric hindrance in the catalytic cleft blocks or severely inhibits endonuclease cleavage. - Dam Methylation (Not Sensitive): Standard E. coli strains harbor DNA adenine methyltransferase (Dam), which methylates adenine within
5′-GATC-3′motifs. XhoI is completely insensitive to Dam methylation. - Dcm Methylation (Not Sensitive): Laboratory E. coli strains also express DNA cytosine methyltransferase (Dcm), which methylates internal cytosines within
5′-CCWGG-3′motifs. XhoI is completely insensitive to Dcm methylation.
This biological divergence creates a fundamental operational distinction between bacterial and eukaryotic DNA. When researchers propagate plasmid DNA in standard laboratory E. coli cloning hosts (such as DH5α, NEB 5-alpha, TOP10, or JM109), the bacterial cells lack mammalian CpG methyltransferases. As a result, plasmid DNA extracted via standard plasmid preparation procedures is completely unmethylated at CpG dinucleotides, permitting complete, rapid XhoI digestion. In sharp contrast, direct digestion of native mammalian genomic DNA frequently fails or yields partial cleavage at methylated genomic loci. Researchers must account for these differences between plasmid DNA and genomic DNA. When digesting mammalian targets, researchers must first amplify the region via PCR to strip away epigenetic 5-methylcytosine modifications.
4. Double-digest buffer standardization and lab supply economics
In directional subcloning, plasmid backbones and insert amplicons are routinely cut with XhoI alongside a second restriction endonuclease (such as EcoRI, BamHI, NdeI, or HindIII). In legacy molecular biology workflows, researchers frequently endured tedious two-step sequential digestions with ethanol precipitation steps because individual enzymes required incompatible buffer salt concentrations.
Modern universal buffer platforms—such as NEB’s rCutSmart™ Buffer (formulated with recombinant albumin to eliminate animal-derived BSA) and high-fidelity (HF) enzyme variants (such as EcoRI-HF and BamHI-HF)—provide 100% mutual buffer activity. In Thermo Fisher Scientific workflows, FastDigest XhoI is fully compatible with universal FastDigest Buffer, permitting one-pot 15-minute double or triple digests.
From a laboratory operations and supply management standpoint, adopting universal-buffer enzyme lines minimizes freezer inventory clutter, reduces stockouts, and eliminates waste caused by expired, single-purpose buffer vials.
Common misunderstandings
Misunderstanding 1: “XhoI and Xho 1 represent two different enzymes or commercial formulations.”
Correction: They are identical. “Xho 1” is an informal spelling substituting an Arabic numeral for the Roman numeral “I”. The Roman numeral reflects standard Smith-Nathans endonuclease nomenclature, denoting the first restriction enzyme characterized from Xanthomonas holcicola. No distinct enzyme named Xho 1 exists.
Misunderstanding 2: “Adding 1 or 2 extra nucleotides to the 5′ end of an XhoI PCR primer is sufficient.”
Correction: This assumption causes countless failed cloning experiments. Rigorous cleavage data from New England Biolabs proves that XhoI achieves only 0% to 10% digestion efficiency when flanked by 2 base pairs. At least 5 to 6 protective nucleotides upstream of CTCGAG are necessary to achieve >90% cleavage.
Misunderstanding 3: “XhoI cannot be heat-inactivated and always demands silica column cleanup.”
Correction: Conventional XhoI from New England Biolabs and Promega is readily denatured by incubation at 65°C for 15 to 20 minutes, while Thermo FastDigest XhoI is inactivated at 80°C for 5 minutes. Unlike heat-resistant enzymes like BamHI, XhoI reactions can be stopped thermally, enabling direct downstream ligation without spin-column purification.
Misunderstanding 4: “XhoI digestion of plasmid DNA fails because of bacterial Dam or Dcm methylation.”
Correction: XhoI is completely unaffected by Dam or Dcm methylation. Digestion failures on plasmid DNA isolated from standard cloning strains (such as DH5α) stem from incomplete enzyme binding due to short primer flanks on PCR inserts, excess ethanol carryover from mini-prep wash buffers, or salt precipitation.
Misunderstanding 5: “Ligating XhoI and SalI fragments regenerates a functional XhoI site.”
Correction: Although XhoI (C↓TCGAG) and SalI (G↓TCGAC) share identical 5′-TCGA overhangs, their ligation produces a hybrid 5′-CTCGAC-3′ junction. This hybrid motif destroys both the XhoI site and the SalI site, preventing re-cleavage by either endonuclease.
Misunderstanding 6: “All double digests combining XhoI with another enzyme require sequential buffers.”
Correction: While legacy protocols from previous decades required sequential digestion, modern formulations—such as NEB rCutSmart or Thermo FastDigest—support 100% simultaneous activity for XhoI alongside common partners including EcoRI, BamHI, NdeI, NotI, and HindIII.
Frequently asked questions
What is the recognition sequence and cleavage site of XhoI?
XhoI recognizes the 6-base pair palindromic sequence 5′-CTCGAG-3′ (complementary strand 3′-GAGCTC-5′). It cleaves between cytosine and thymine (5′-C↓TCGAG-3′), generating a 4-base cohesive sticky end with a 5′-TCGA-3′ single-stranded extension on both cleaved strands.
What is the difference between XhoI and Xho 1?
There is no biochemical difference. “Xho 1” is an informal alphanumeric variant using an Arabic numeral in place of the Roman numeral “I”. Both names designate the identical Type II restriction endonuclease isolated from Xanthomonas holcicola.
How do you heat-inactivate XhoI after a restriction digest?
For standard New England Biolabs preparations, incubate the reaction at 65°C for 20 minutes. For Promega preparations, incubate at 65°C for 15 minutes. For Thermo Scientific conventional XhoI, incubate at 80°C for 20 minutes, whereas Thermo FastDigest XhoI requires 80°C for 5 minutes.
Why does XhoI fail to cut mammalian genomic DNA?
The central dinucleotide of the XhoI recognition motif is an overlapping CpG site (5′-CTCGAG-3′). In mammalian genomic DNA, CpG cytosines are frequently methylated to 5-methylcytosine by cellular methyltransferases. Because XhoI cleavage is impaired by CpG methylation, digestion is blocked or heavily reduced. Amplifying the target locus by PCR removes epigenetic methylation, enabling complete XhoI cleavage.
How many extra bases are needed upstream of XhoI on a PCR primer?
Add at least 5 to 6 non-complementary flanking nucleotides (such as 5′-GATATA-3′) 5′ of the CTCGAG sequence. Controlled enzyme studies show that primers with only 2 flanking bases exhibit 0% to 10% cleavage, whereas 5 to 6 flanking bases achieve >90% cleavage efficiency.
Can XhoI cohesive ends be ligated to SalI cohesive ends?
Yes. Both XhoI (5′-C↓TCGAG-3′) and SalI (5′-G↓TCGAC-3′) generate identical 4-base 5′-TCGA overhangs. When joined by T4 DNA ligase, they produce a hybrid 5′-CTCGAC-3′ junction that cannot be cleaved by either XhoI or SalI, permanently destroying both restriction sites.
Which buffer gives 100% activity for XhoI double digests?
In the New England Biolabs system, 100% activity is achieved in rCutSmart™ Buffer, NEBuffer r2.1, and NEBuffer r3.1. In the Thermo Scientific system, universal FastDigest Buffer provides 100% activity. In the Promega system, Buffer D provides 100% activity.
Sources
- New England Biolabs (NEB), XhoI Product Specification Sheet & Technical Data (Catalog #R0146S / #R0146L, Recombinant XhoI): neb.com/products/r0146-xhoi (accessed 2026-11-12).
- New England Biolabs (NEB), Cleavage Close to the End of DNA Fragments Technical Reference: neb.com/cleavage-close-to-the-end-of-dna-fragments (accessed 2026-11-12).
- Thermo Fisher Scientific, FastDigest XhoI and Conventional Restriction Enzyme Specifications (Catalog #FD0694, #ER0691): thermofisher.com/FD0694 (accessed 2026-11-12).
- Promega Corporation, XhoI Restriction Enzyme Technical Bulletin (Product #R6161, TB093): promega.com/xhoi (accessed 2026-11-12).
- REBASE (The Restriction Enzyme Database, Dr. Richard J. Roberts): XhoI Enzyme Record & Isoschizomer Catalog: rebase.neb.com/XhoI (accessed 2026-11-12).
- Gingeras, T. R., Myers, P. A., Olson, J. A., Hanberg, F. A., & Roberts, R. J. (1978). “A new specific endonuclease present in Xanthomonas holcicola, XhoI.” Journal of Molecular Biology, 118(1), 113–122.
- Merck / Novagen, pET System Manual: Vector Architecture, Multiple Cloning Sites, and C-Terminal Polyhistidine Tag Fusion Mechanics (11th Edition): emdmillipore.com (accessed 2026-11-12).







