Skip to main content
v2026.11,986 entries · CC-BY 4.0
CASRAICASRAI Working GroupsHelp write the standards you have to implement24 working groups propose, review and ratify the terms CASRAI publishes, one per dictionary domain. Community and observer seats start at about two hours a month; chairs and co-chairs give 6–8 hours a month. Applications are reviewed.Apply to join a group CASRAI · Volunteer seats
Dictionary termTrack EProposedv2026.1

Journal of Food Engineering: Scope, Publisher and Impact Factor

Journal of Food Engineering is a peer-reviewed Elsevier journal (ISSN 0260-8774), published since 1982, that carries original research at the interface between food and engineering, with emphasis on novelty, engineering rigor and industrial application.

ByCASRAI Editorial Board
· Last updated 20 Nov 2026

Working group for this domain: Responsible research assessment working group

Share this

Ask CASRAI · full access

Ask about Journal of Food Engineering: Scope, Publisher and Impact Factor

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Editorial commentary

Journal of Food Engineering (JFE) is an Elsevier journal, ISSN 0260-8774, that has published original research at the interface between food and engineering since its first issue in 1982. Elsevier’s journal page, checked on 20 November 2026, lists a Journal Impact Factor of 5.8 and a 5-year impact factor of 6.1. Elsevier does not state the Journal Citation Reports release year on that page, so cite the figures as “listed on Elsevier’s journal page on 20 November 2026” rather than as a named JCR year.

What Journal of Food Engineering publishes

Elsevier describes the journal as an international forum for original research papers on any subject at the interface between food and engineering, particularly work relevant to industry, with emphasis on novelty, engineering rigor and clear perspectives of applications. The scope listed on the same page covers:

  • engineering properties of foods, including multi-phase and multi-scale physics;
  • innovative methods, sensors and actuators for processing, quality, safety, packaging, storage and the supply chain;
  • analysis, design, optimization and control of equipment and plants;
  • artificial intelligence and data-driven innovations with an industrial emphasis;
  • sustainability and economics.

What the journal expects from submissions

The scope statement also sets methodological expectations that go beyond a topic list. Modeling papers should use validated mathematical models and avoid black-box use of software. Design and optimization studies should show engineering rigor, not only observational comparisons. Packaging papers should rest on quantitative analysis such as release kinetics, diffusion and shelf-life modelling. Review articles should be critical rather than descriptive, and experimental designs should be replicable and use established statistics. Authors choosing between food-science journals can use these statements to judge whether a manuscript fits an engineering-focused venue; a related food-science title is covered in Trends in Food Science and Technology.

Journal of Food Engineering impact factor

The Journal Impact Factor is a journal-level average: citations received in the data year to the articles and reviews the journal published in the previous two years, divided by the number of those items. The 5-year impact factor applies the same idea over a five-year window, which suits fields where papers are cited slowly. Clarivate’s Journal Citation Reports is the authority for both figures. Elsevier’s page lists 5.8 and 6.1 respectively; because the page gives no JCR year, confirm the current value in JCR before quoting it in a funding or promotion document and always name the data year there.

Impact factors move from year to year. Wikipedia’s article on the journal cites a 2022 impact factor of 5.5, a secondary-source example of how the figure differs between releases. CiteScore is a separate Elsevier/Scopus metric with a different window and should not be mixed with the Clarivate figures.

Using the metric with care

A journal-level average says little about any individual article: a few highly cited papers can lift the figure for the whole journal. It should not be used alone to assess a researcher or a manuscript; the San Francisco Declaration on Research Assessment (DORA) recommends against journal-based metrics as a surrogate for the quality of individual papers. Compare journals only within a field, because citation practices differ between food engineering and, for example, biomedicine.

Identifiers and record size

Crossref, queried on 20 November 2026, lists the journal under the title Journal of Food Engineering, publisher Elsevier, print ISSN 0260-8774, with 11,824 registered DOIs: 1,243 current and 10,581 backfile. These counts describe the size of the journal’s DOI record, not its citation performance. The data table below sets out each figure with its source.

Sources

Examples

Worked examples

  • Is an instance

    Citing the journal's metric: 'Impact factor 5.8, as listed on Elsevier's journal page on 20 November 2026', with the Journal Citation Reports data year added once confirmed in JCR.

Machine-readable encodings

Use in your systems

JATS XML <kwd> element
xml
<kwd vocab="CASRAI Dictionary"
     vocab-identifier="https://casrai.org/dictionary/"
     vocab-term="Journal of Food Engineering: Scope, Publisher and Impact Factor"
     vocab-term-identifier="https://casrai.org/dictionary/term/journal-of-food-engineering">Journal of Food Engineering: Scope, Publisher and Impact Factor</kwd>
Schema.org DefinedTerm (JSON-LD)
Schema.org DefinedTerm (JSON-LD)
json
{
  "@context": "https://schema.org",
  "@type": "DefinedTerm",
  "@id": "https://casrai.org/dictionary/term/journal-of-food-engineering",
  "name": "Journal of Food Engineering: Scope, Publisher and Impact Factor",
  "identifier": "https://casrai.org/dictionary/term/journal-of-food-engineering",
  "description": "Journal of Food Engineering is a peer-reviewed Elsevier journal (ISSN 0260-8774), published since 1982, that carries original research at the interface between food and engineering, with emphasis on novelty, engineering rigor and industrial application.",
  "inDefinedTermSet": "https://casrai.org/dictionary/domain/responsible-assessment#set",
  "url": "https://casrai.org/dictionary/term/journal-of-food-engineering",
  "license": "https://creativecommons.org/licenses/by/4.0/",
  "publisher": {
    "@id": "https://casrai.org/#organization"
  },
  "author": {
    "@id": "https://casrai.org/#editorial-team"
  },
  "datePublished": "2026-11-20T21:39:58Z",
  "dateModified": "2026-11-20T21:39:58Z",
  "inLanguage": "en",
  "isAccessibleForFree": true
}

Data: Journal of Food Engineering: listed metrics and DOI record counts

Impact factor values as listed on Elsevier's journal page and DOI counts from the Crossref journal record, both checked 20 November 2026. The Journal Citation Reports release year is not stated on the Elsevier page.

Period covered: 2026.

Journal of Food Engineering: listed metrics and DOI record counts
MeasureValueSource
Impact factor5.8Elsevier journal page
5-year impact factor6.1Elsevier journal page
Registered DOIs, total11824Crossref
Registered DOIs, current1243Crossref
Registered DOIs, backfile10581Crossref

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →