Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop 3m aura supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

3M Aura Respirators: Models, Specs, and Lab Use

Explore the 3M Aura N95 respirator family. Compare 9205+, 9210+, 1870+, and 9211+ models, NIOSH and FDA clearances, materials, and lab procurement factors.

Written and maintained by CASRAI Editorial Board

Published

On this page

Short answer: What is the 3M Aura?

The 3M Aura is a family of three-panel, flat-fold disposable particulate respirators certified by NIOSH as N95 filtering facepiece respirators under 42 CFR 84. Providing an Assigned Protection Factor of 10, Aura respirators use low-breathing-resistance electret media and an ergonomic three-panel design that accommodates facial movement, integrates with safety eyewear, and seals across diverse facial profiles.

This page describes products and general use; it is not medical advice.

Definition and scope of 3M Aura particulate respirators

The 3M Aura series includes disposable filtering facepiece respirators evaluated by the National Institute for Occupational Safety and Health (NIOSH). Under NIOSH 42 CFR Part 84, an N95 rating certifies at least 95% filtration efficiency against non-oil airborne particles when challenged with 0.3-micrometer sodium chloride aerosol at 85 liters per minute.

Filtration relies on 3M Advanced Electret Media (AEM), composed of electrostatically charged polypropylene microfibers. These fibers capture submicron particles through mechanical impaction and electrostatic attraction while maintaining low airflow resistance. Within occupational personal protective equipment (PPE) programs, Aura respirators filter particulates only; they do not filter gases, vapors, or provide oxygen. Where higher filtration or oil resistance is mandated, facilities evaluate N95 versus N100 respirators.

How it works and how it is used in practice

The core feature of the Aura series is its three-panel flat-fold architecture, which flexes dynamically during speech without collapsing:

  • Embossed top panel: The sculpted upper panel features an embossed surface designed to direct warm, moist exhaled air away from the bridge of the nose, significantly reducing eyewear fogging.
  • Sculpted nose panel: Conforms to nasal and eye contours, preserving field of vision and accommodating laboratory safety glasses.
  • Adjustable nose clip: An aluminum clip lined with polyurethane foam enables a custom seal across the nasal bridge.
  • Chin tab: A lower tab designed for easy positioning and adjustment without touching the central filter surface.

Under OSHA 29 CFR 1910.134, wearers must position the bottom headband around the neck below the ears and the top headband over the crown of the head. A user seal check must be performed before entering contaminated areas by placing hands over the respirator and assessing seal integrity during rapid inhalation and gentle exhalation.

Types and model specifications: 9205+, 9210+, 1870+, and 9211+

The 3M Aura family consists of four primary commercial models configured for industrial or healthcare settings:

Model Primary Clearance NIOSH Approval Strap Material & Color Fluid Resistance (ASTM F1862) Exhalation Valve Primary Setting
3M Aura 9205+ NIOSH 42 CFR 84 (N95) TC-84A-8590 Thermoplastic elastomer (Blue, staple-free) None (Not rated) None (Unvalved) Industrial work, dry powder handling, lab maintenance
3M Aura 9210+ NIOSH 42 CFR 84 (N95) TC-84A-5668 Braided polyisoprene (White, stapled) None (Not rated) None (Unvalved) Dusty lab tasks requiring durable braided headbands
3M Aura 1870+ NIOSH N95 & FDA Class II (510(k) K120422) TC-84A-5726 Braided polyisoprene (Red/Orange, stapled) 160 mm Hg None (Unvalved) Clinical research, surgical suites, healthcare isolation
3M Aura 9211+ NIOSH 42 CFR 84 (N95) TC-84A-5669 Braided polyisoprene (Blue, stapled) None (Not rated) 3M Cool Flow valve Non-sterile environments with high exertion or heat

The fundamental divide is between industrial variants and the healthcare model. The Aura 1870+ is dual-regulated: NIOSH-certified as an N95 respirator and cleared by the FDA under 21 CFR 878.4040 as a Class II surgical mask. It meets ASTM F1862 fluid penetration resistance at 160 mm Hg, Class 1 flammability under 16 CFR 1610, and Bacterial Filtration Efficiency exceeding 99% per ASTM F2101. Industrial models (9205+, 9210+, 9211+) lack fluid barrier testing and must not be used where blood or splash risks exist.

Strap construction also distinguishes models. The 9205+ uses ultrasonically bonded thermoplastic elastomer straps, whereas the 9210+ and 1870+ feature stapled braided polyisoprene straps that resist hair pulling. For dimensional and sizing comparisons, consult N95 sizes and fit characteristics.

Where it matters for labs, clinics, and supply decisions

Procuring and deploying 3M Aura respirators requires matching model capabilities with institutional hazard assessments:

  • Biomedical research and vivariums: In laboratories handling allergens, biological powders, or animal care, unvalved models (9205+ or 9210+) deliver APF 10 protection against airborne particulates under Biosafety in Microbiological and Biomedical Laboratories (BMBL) practices.
  • Clinical trials and infection control: When staff encounter aerosol-transmissible biological agents or splash hazards, the dual-cleared 1870+ is required. Its fluid resistance protects clinicians, while its unvalved construction ensures source control.
  • Exhalation valve restrictions: The 3M Aura 9211+ includes an exhalation valve that exhausts unfiltered air. It is prohibited in sterile operating rooms, cell culture rooms, and cleanrooms. When airborne concentrations exceed APF 10, facilities evaluate PAPR versus N95 respirators.
  • OSHA compliance and fit testing: OSHA 29 CFR 1910.134 mandates that tight-fitting respirators require initial and annual qualitative or quantitative fit testing. A user who passes on a 3M Aura cannot substitute another brand without retesting.
  • Storage and shelf life: Authentic Aura respirators have a 5-year shelf life when stored unopened between -20°C (-4°F) and +30°C (+86°F) at relative humidity below 80%.

Common misunderstandings

  • All Aura models are surgical respirators: Only the 1870+ is FDA-cleared and tested for fluid resistance (160 mm Hg). The 9205+ and 9210+ are industrial particulate respirators.
  • Aura respirators filter chemical vapors: N95 filters mechanical particulates only. They provide zero protection against solvent vapors, acid gases, or carbon monoxide.
  • The flat-fold design eliminates fit testing: While the three-panel contour fits many faces well, OSHA requires individual fit testing before occupational use.
  • Valved models provide infection source control: The exhalation valve on the 9211+ expels unfiltered air, making it unsafe for sterile fields or preventing pathogen transmission to others.
  • 3M produces authentic black Aura N95 respirators: Authentic NIOSH-approved Aura respirators feature white filter media. Commercial respirators marketed as “black 3M Aura” are either unapproved consumer masks or counterfeits.

Frequently asked questions

What is the difference between the 3M Aura 9205+ and 1870+?

The 9205+ is an industrial N95 respirator (NIOSH approval TC-84A-8590) with blue elastomer straps and no fluid splash rating. The 1870+ is dual-cleared by NIOSH (TC-84A-5726) and the FDA as a Class II surgical mask (21 CFR 878.4040), offering 160 mm Hg fluid resistance (ASTM F1862) and red/orange braided headbands for surgical and healthcare environments.

What does the NIOSH approval TC-84A-8590 signify on the 3M Aura 9205+?

TC-84A-8590 is the official certification number issued by NIOSH under 42 CFR Part 84. It confirms that the 9205+ achieved at least 95% filtration efficiency against 0.3-micrometer non-oil aerosol challenge particles at a flow rate of 85 liters per minute.

How does the 3M Aura 9210+ differ from the 9205+?

Both share the same three-panel unvalved N95 filtration design. The 9210+ differs by using white braided polyisoprene headbands fastened with steel staples (NIOSH approval TC-84A-5668), offering higher tensile durability and reduced hair snagging compared to the 9205+’s blue elastomer bands.

Is there an official black 3M Aura N95 respirator?

No. 3M does not manufacture an authentic NIOSH-approved Aura N95 respirator with a black coverweb. Legitimate NIOSH-approved models (9205+, 9210+, 1870+, 9211+) use white exterior filter material. Black units sold online are non-NIOSH consumer masks or counterfeits.

Can the valved 3M Aura 9211+ be used in healthcare or cleanroom settings?

No. The 3M Aura 9211+ features an exhalation valve that releases unfiltered breath. It is prohibited in sterile operating rooms, tissue culture suites, and infection control isolation environments where source control is required.

Sources

  • 3M Personal Safety Division. 3M™ Aura™ Particulate Respirator 9205+, N95 Technical Specifications. Technical Data Sheet. 3M Company. 2026. https://multimedia.3m.com/mws/media/1792732O/3m-aura-particulate-respirator-9205-technical-specifications.pdf
  • 3M Health Care Division. 3M™ Aura™ Health Care Particulate Respirator and Surgical Mask 1870+, N95 Technical Specifications. Technical Data Sheet. 3M Company. 2026. https://multimedia.3m.com/mws/media/1792733O/3m-aura-health-care-particulate-respirator-and-surgical-mask-1870-technical-specifications.pdf
  • 3M Personal Safety Division. 3M™ Aura™ Particulate Respirators 9210+ and 9211+, N95 Technical Specifications. Technical Data Sheet. 3M Company. 2026. https://multimedia.3m.com/mws/media/934448O/3m-aura-particulate-respirators-9210-and-9211-technical-specifications.pdf
  • National Institute for Occupational Safety and Health (NIOSH). Certified Equipment List (CEL): Respiratory Protective Devices. Centers for Disease Control and Prevention. 2026. https://www.cdc.gov/niosh/npptl/topics/respirators/cel/default.html
  • Occupational Safety and Health Administration (OSHA). 29 CFR 1910.134: Respiratory Protection Standard. U.S. Department of Labor. 2026. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.134
  • U.S. Food and Drug Administration (FDA). 21 CFR 878.4040: Surgical Apparel. Code of Federal Regulations Title 21, Volume 8. 2026. https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/cfrsearch.cfm?fr=878.4040

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about 3M Aura Respirators: Models, Specs, and Lab Use

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →