Written and maintained by CASRAI Editorial Board
Published
On this page
ACM IMC is the ACM Internet Measurement Conference, a yearly, highly selective venue for measurement-based research in data communications. The 2026 edition is the 26th, sponsored by ACM SIGCOMM, and runs 12-16 October 2026 at the Karlsruhe Institute of Technology (KIT) in Karlsruhe, Germany, according to the conference website. This guide pulls together what a researcher needs before submitting: scope, the two submission cycles, paper formats, the double-blind and ethics rules, the Replicability Track, one-shot revision and the generative AI and open access policies.
What ACM IMC is
The conference describes itself as a highly selective venue for the presentation of measurement-based research in data communications. It began in 2001 as a workshop; the general conference page lists ACM SIGCOMM and ACM SIGMETRICS as sponsors, in cooperation with USENIX, while the 2026 site credits ACM SIGCOMM alone. It is usually held in late October or early November, and the 2026 meeting sits in mid-October.
Readers who know other systems and security venues will find the shape familiar: a call for papers, a program committee, double-blind review and an ACM proceedings. For comparison with neighbouring networking and security venues, see the CASRAI guides to HotNets, ACSAC, the NDSS Symposium and USENIX.
Scope and topics
The call for papers names five areas of interest:
- network structure and performance;
- application and end-user behavior;
- measurement-based modeling;
- measurement tools;
- novel data collection.
The common thread is that a paper rests on measurements of real networks, services or users, not on design alone. A submission that proposes a measurement tool or a new way to collect data fits the scope in the same way as one that reports findings from a measurement campaign.
Submission cycles and deadlines
IMC 2026 runs two submission cycles, and both use the HotCRP review system. Each cycle has a registration deadline one week before the paper deadline, an early-reject round, a notification date and a camera-ready date. The data table below lists every milestone for both cycles, as published on the conference site. The conference site also gives 29 September 2026 as the publication date of the proceedings.
Deadlines move between years, so read the current call for papers before planning. The cycle structure matters for one more reason: the one-shot revision process described below carries a paper from one cycle into the next.
Paper formats and page limits
The 2026 call allows two paper lengths: a full paper of 13 pages and a short paper of 6 pages. References and appendices do not count toward the limit. The submission instructions add formatting rules that are checked before review:
- letter-size pages, double-column layout, at least 10-point text and no more than 55 lines per column;
- figure fonts of at least 9 points;
- a PDF smaller than 15 MB;
- an abstract of at most 200 words.
The instructions state that noncompliant submissions are rejected without review, so the format is worth checking before the registration deadline rather than the paper deadline. Authors also declare whether artifacts are available in full, in part or not at all; artifacts are not required at submission. Authors must declare prior submissions of related work as well.
Double-blind and ethics rules
Anonymization
IMC reviews are double-blind: authors remove names, affiliations and grant numbers from the submission. Measurement research has a particular complication, because the data is often tied to a specific vantage point. The instructions allow non-public vantage points or datasets to be named when they cannot be blinded, and allow public resources such as RouteViews and RIPE Atlas to be named. Posting to arXiv or releasing a technical report is allowed. For the wider debate about anonymous review, see the CASRAI term on double-blind peer review.
Ethics appendix
Every submission must include an appendix titled “Ethics”. For work involving human subjects, the instructions require approval or an exemption from an institutional review board (IRB) before the research is carried out; the CASRAI entry on the institutional review board explains that review. For work that finds security vulnerabilities, the instructions call for responsible disclosure.
Conflicts of interest
The instructions define conflicts of interest to include people at the same institution (including within the last 12 months), advisor and advisee relationships, and collaborations from 2023 onward. More on the general concept is in the CASRAI term conflict of interest.
Replicability Track
IMC 2026 includes a Replicability Track aimed at reproducing results that were published at IMC or other top venues. The process has two steps: authors first submit a one-page Expression of Interest, then a full paper. The full paper is judged on the same criteria as other IMC submissions. For background on the terminology, see the CASRAI term replicability.
One-shot revision
One-shot revision is the conference’s way of giving a promising paper a second chance without a full rejection. According to the call for papers, a paper can receive a one-shot revision only if a reviewer acts as its champion, the required additions or changes number no more than three, and the program committee agrees. The paper stays under review. A paper given a one-shot revision in the first cycle is resubmitted to the second cycle of the same year; a paper given one in the second cycle is resubmitted to the first cycle of IMC 2027.
Generative AI policy
The submission instructions set rules for both authors and reviewers:
- small uses of generative AI for text are acknowledged in a footnote;
- larger uses are disclosed in an appendix, with the tools and versions named;
- authors upload a plain-text reference file (.bbl);
- reviewers must not upload submissions to generative AI tools.
Open access and proceedings
From 1 January 2026, ACM publications are fully open access. Authors cover this either through their institution’s ACM Open agreement or through an article processing charge (APC). The call for papers states that subsidized APCs apply in 2026, at $250 for ACM members and $350 for non-members. Check with your institution first, since many research offices already hold an ACM Open agreement; see the CASRAI term on open access for the vocabulary.
Choosing between the two cycles
The two cycles are about five months apart, and the choice follows from where the measurement work stands. A team whose data collection is finished by autumn can target the first cycle, which gives an early-reject decision in February and a notification in March, leaving camera-ready work for April. A team still collecting data through the winter can target the second cycle, with notification in early August and camera-ready on 1 September, before the October conference.
The cycles also interact through one-shot revision. As an illustration (a hypothetical timeline, not a real case): a paper submitted to the first cycle that receives a one-shot revision is resubmitted to the second cycle, which means registering by 22 April and submitting by 29 April 2026, then receiving its decision on 4 August. The same paper submitted to the second cycle and given a one-shot revision would instead wait for the first cycle of IMC 2027. Plan the revision window accordingly, because the number of changes the program committee will accept is capped at three.
Common reasons a submission fails before review
Two rules in the submission instructions act as hard filters. First, noncompliance with the formatting requirements (page size, columns, font sizes, line count, file size, abstract length) leads to rejection without review. Second, the Ethics appendix is mandatory, so a measurement study with no ethics discussion is incomplete however strong its results. The remaining checks are softer but still matter: unblinded names or grant numbers, an undeclared prior submission and a missing artifact declaration are the kinds of lapses the instructions ask authors to avoid.
How IMC compares with other venues in this CASRAI series
IMC is the CASRAI venue guide for measurement-based research in data communications, alongside the guides to HotNets, ACSAC and NDSS linked above. Authorship and credit practice in computer science also differs from journal fields; the CASRAI guide to conference versus journal authorship credit in computer science covers that, and writing a rebuttal for a double-blind conference is useful once reviews arrive.
Checklist before submitting to ACM IMC
- Confirm the paper rests on measurement and fits one of the five topic areas.
- Register by the cycle’s registration deadline, then submit through HotCRP.
- Check the page limit (13 or 6 pages), column layout, font sizes, abstract length and file size.
- Remove identifying details, keeping only the named vantage points the rules allow.
- Add the “Ethics” appendix, with IRB approval or exemption and any disclosure plan.
- Declare artifact availability and any prior submissions.
- Disclose generative AI use as the policy requires and upload the .bbl file.
Sources
- ACM SIGCOMM: ACM IMC 2026 conference website, checked 2026-11-17
- ACM IMC 2026: Call for papers, checked 2026-11-17
- ACM IMC 2026: Submission instructions, checked 2026-11-17
- ACM IMC: Internet Measurement Conference, general page, checked 2026-11-17
Data: ACM IMC 2026 submission cycle milestones
Registration, submission, early-reject, notification and camera-ready dates for the two submission cycles of ACM IMC 2026, compiled from the conference website's published schedule and call for papers.
Period covered: 2025/2026.
| Milestone | Cycle 1 | Cycle 2 |
|---|---|---|
| Registration deadline | 2025-11-13 | 2026-04-22 |
| Submission deadline | 2025-11-20 | 2026-04-29 |
| Early-reject notification | 2026-02-03 | 2026-06-25 |
| Author notification | 2026-03-17 | 2026-08-04 |
| Camera-ready deadline | 2026-04-14 | 2026-09-01 |
Sources
- ACM IMC 2026: Call for papers (accessed 2026-11-17)
- ACM IMC 2026 conference website (accessed 2026-11-17)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







