Skip to main content
v2026.11,986 entries · CC-BY 4.0

ICCAD: IEEE/ACM Conference on Computer-Aided Design

What ICCAD is, how its 2026 review, rebuttal and camera-ready process worked, and what page limits, APCs and copyright mean for authors.

Written and maintained by CASRAI Editorial Board

Published

On this page

ICCAD is the IEEE/ACM International Conference on Computer-Aided Design, an annual conference for electronic design automation (EDA) research, jointly sponsored by IEEE and ACM. It covers the full spectrum of EDA, from device-level physics to system-level architecture, and every paper is selected from peer-reviewed submissions. The 2026 edition ran 8 to 12 November in San Jose, California.

Definition and scope

ICCAD is a research conference, not a journal and not a trade show. Its bylaws state the purpose as education and technical enrichment for computer-aided design (CAD) professionals, and describe it as a forum for the field. It is co-sponsored by the IEEE Council on Electronic Design Automation (CEDA) and the ACM Special Interest Group on Design Automation (SIGDA), in cooperation with the IEEE Electron Device Society. The conference website states that the first edition took place more than 40 years ago.

The scope in the 2026 call for papers is deliberately wide. It runs from the physics of individual devices up to system-level architecture, which is why the programme draws on circuit designers, tool builders, computer architects and, increasingly, researchers in emerging technologies. For readers new to the field, the integrated circuit design guide explains the design flow that EDA tools support, and the instruction set architecture guide covers the architectural layer that system-level CAD work targets.

How the conference is governed

The bylaws describe a simple division of labour. An Executive Committee administers the conference, and a Technical Program Committee selects the papers. The conference is held annually, in November before Thanksgiving or in the last ten days of October, and lasts three to four days. Workshops that accompany the conference are technically independent of it.

The bylaws also explain the IEEE/ACM duality that puzzles many authors. Since 2013, the cost shares have been IEEE CEDA 46.7 percent, IEEE Circuits and Systems Society (CAS) 20 percent and ACM SIGDA 33.3 percent. Copyright to the proceedings alternates between the sponsors: CEDA holds it two years out of three and SIGDA one year in three. That is why the rights form an author completes can differ from one edition to the next. The 2026 final author instructions direct accepted authors to the ACM eRights form, and the site has a separate explainer on the IEEE copyright form for the IEEE side of the arrangement.

How the 2026 review and publication process worked

The 2026 cycle followed a fixed sequence, and the data table below the sources lists each milestone with its date. In outline, authors registered an abstract, then submitted the full paper a week later. Reviews were returned to authors for a rebuttal window, and regular-paper decisions were notified in July. Camera-ready files and author registration followed, ahead of the November meeting.

Submission and the single corresponding author

The call for papers contains an easily missed rule: each paper has exactly one corresponding author, and that person’s membership status and affiliation determine the article processing charge (APC) rate and eligibility for waivers. Research offices that coordinate multi-institution papers should therefore agree on the corresponding author before the abstract deadline, not at acceptance.

The rebuttal phase

ICCAD uses a rebuttal step handled through the HotCRP review system. The rebuttal page says its purpose is to clarify misunderstandings and answer reviewers’ questions. No changes to the paper are allowed, and the rebuttal is not an opportunity to upload a revised manuscript. Authors who plan a rebuttal should treat it as a short written reply and decide in advance which reviewer questions the existing text already answers.

Camera-ready rules

Camera-ready submission also goes through HotCRP and uses the ACM proceedings templates. The final author instructions say the camera-ready paper must be identical to the reviewed version, with a short list of permitted differences: adding names and affiliations (submissions are double-blind), fixing typos, and making revisions the reviewers requested. Changes to the title, technical content, results, figures or author list are not allowed. Authors also complete the ACM eRights form.

Page limits and extra pages

Regular and invited papers may run up to 6 pages of content plus 1 page of references at no charge. Up to 2 additional content pages are available at 150 US dollars per page, which sets the maximum at 8 content pages plus 1 page of references. A budget line for page charges is therefore a decision for the paper’s authors, and it can only arise if the paper needs more than six content pages.

Registration and presentation

The author registration deadline for 2026 was 4 September. One full registration covers one accepted paper, the conference is held in person, and at least one author must present. The general FAQ lists an early-bird deadline of 24 August 2026, states that fees are in US dollars only, and says an invitation letter is issued after payment. Registered participants have access to the proceedings.

Topic areas in the 2026 call for papers

The call for papers groups submissions into three broad areas. The table below reproduces that structure and the sub-topics the call names under each; it adds nothing beyond what the call lists.

Topic group Sub-topics named in the call
System-Level CAD System modeling and hardware/software co-design; AI and accelerators; embedded and edge computing, cyber-physical systems, FPGAs and CGRAs; security; efficiency, including low-power and approximate computing
Synthesis, Verification, Physical Design, Analysis, Simulation, Modeling Logic synthesis; physical design (floorplanning, placement, routing, clock-tree synthesis); verification and test (formal methods, emulation, automatic test pattern generation, post-silicon debug); analysis (timing, power, signal integrity); manufacturability (design for manufacturability, yield, reliability); analog and mixed-signal, RF and electromagnetic design
Emerging Technologies Nanoscale and post-CMOS devices; non-von Neumann computing, including quantum, DNA and neuromorphic; Bio-CAD, including microfluidics, biosensors and synthetic biology

The Emerging Technologies group is the one most relevant to laboratory researchers outside conventional chip design, because Bio-CAD (microfluidics, biosensors, synthetic biology) sits next to semiconductor topics in the same programme. Beyond regular papers, the call also invites proposals for workshops, tutorials, special sessions and panels.

Where it matters for labs and research offices

Three details of the 2026 rules reach beyond the authors themselves.

  • Open access and APCs. The ICCAD site explains that ACM became fully open access on 1 January 2026. Authors’ papers are made open access either through an ACM Open institutional agreement or by paying an APC, and the page states that roughly 70 to 75 percent of ACM-sponsored conference papers need no APC. For 2026 conferences only, a temporary subsidy set the APC at 250 US dollars for ACM or SIG members and 350 US dollars for non-members, described as a 65 percent discount. A SIGDA Financial Hardship Waiver was available to SIGDA-member corresponding authors, requested after acceptance through ACM eRights.
  • Copyright and rights forms. Because proceedings copyright alternates between CEDA and SIGDA, institutional repository and open-access policies should be checked against the rights form for the specific edition, not against a previous year’s experience.
  • Travel and attendance. Because the meeting is in person and at least one author must present, a department supporting an accepted paper needs to budget one full registration per paper plus travel.

For programming-language and compiler research, which has its own flagship venue and its own rules, compare the sibling conference explainer for PLDI.

Common misunderstandings

ICCAD is not the Design Automation Conference

ICCAD and the Design Automation Conference (DAC) are separate meetings. This page covers only ICCAD, the IEEE/ACM conference described in its own bylaws and call for papers.

Acceptance is not publication in a journal

ICCAD papers appear in conference proceedings. The bylaws specify peer-reviewed submissions and a Technical Program Committee, but nothing in the rules makes a conference paper a journal article, and the final author instructions give separate page limits and a separate ACM rights process.

The rebuttal is not a revision round

Authors sometimes expect a chance to upload a revised manuscript. The rebuttal page rules that out: no changes to the paper are allowed, and the rebuttal only clarifies misunderstandings and answers reviewer questions.

Camera-ready is not a second edit window

The permitted differences are narrow: names and affiliations, typo fixes and reviewer-requested revisions. Altering the title, results, figures or author list is explicitly excluded.

The APC does not depend on the paper alone

The call for papers says the single corresponding author’s membership status and affiliation determine the APC rate and waiver eligibility, so the same paper could face different charges depending on who is named as corresponding author.

Frequently asked questions

What does ICCAD stand for?

ICCAD stands for the IEEE/ACM International Conference on Computer-Aided Design. It is sponsored jointly by IEEE and ACM, with IEEE CEDA and ACM SIGDA as the co-sponsoring bodies.

Where was ICCAD 2026 held?

ICCAD 2026 took place 8 to 12 November in San Jose, California, according to the conference website. Recent earlier venues listed on the history page are Munich (26 to 30 October 2025), New Jersey (27 to 31 October 2024) and San Francisco (29 October to 2 November 2023).

How long can an ICCAD paper be?

Regular and invited papers can be up to 6 pages plus 1 page of references without charge. Two extra content pages cost 150 US dollars each, for a maximum of 8 content pages plus 1 page of references.

Can authors respond to reviews?

Yes. A rebuttal phase runs through HotCRP after reviews are released. It is limited to clarifying misunderstandings and answering reviewer questions, and the paper itself cannot be changed.

How many authors can be corresponding author?

Exactly one. That person’s membership status and affiliation determine the APC rate and waiver eligibility.

Does every ICCAD paper pay an APC?

No. The conference’s page on the ACM publishing model says about 70 to 75 percent of ACM-sponsored conference papers need no APC, because papers can be covered by an ACM Open institutional agreement. Rates and subsidies stated there apply to 2026 conferences.

According to the bylaws, copyright alternates between sponsors: IEEE CEDA two years out of three and ACM SIGDA one year in three.

Sources

Data: ICCAD 2026 author and attendee milestones

Dated milestones in the 2026 ICCAD review, publication and registration cycle, compiled from the conference's call for papers and general FAQ pages and listed in calendar order.

Period covered: 2026.

ICCAD 2026 author and attendee milestones
MilestoneDate (2026)Applies to
Abstract submission deadline2026-04-07Regular papers
Regular paper and proposal submission deadline2026-04-14Regular papers; workshop, tutorial, special session and panel proposals
Workshop notifications2026-06-08Workshop proposals
Reviews released to authors for rebuttal2026-06-10Regular papers
Tutorial, special session and panel notifications2026-06-15Tutorial, special session and panel proposals
Rebuttal submission deadline2026-06-20Regular papers
Regular paper notifications2026-07-11Regular papers
Early-bird registration deadline2026-08-24Attendees
Author registration deadline2026-09-04Authors of accepted papers
Conference, San Jose2026-11-08 to 2026-11-12All participants

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about ICCAD: IEEE/ACM Conference on Computer-Aided Design

Ask your first 2 questions free below. Subscribers get 150 a day for $29 a month.

An AI assistant specialized in research administration. It cites the sources behind every answer, labels web answers and says when it can't answer.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays free to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →